Skip to content

Unit 2 of 9

Compound Structure and Properties

9% of the exam295 reviewed questions104 key terms18 min read

Compound Structure and Properties is worth about 9% of the AP Chemistry exam. Our bank tests it with 295 reviewed questions across 104 distinct ideas — 102 easier, 144 medium and 49 harder.

On this page · 12 sections

Every question in this unit comes back to one force. Positive nuclei attract negative electrons and like charges repel, and Coulomb's law says that attraction grows with the size of the charges and shrinks as the distance between them grows. That single rule explains why NaCl melts at 801 °C, why a triple bond is shorter than a single bond, and why a lone pair squeezes the angle in ammonia down to 107°.

The unit moves from bonds to shapes to properties. First you decide whether a bond is ionic, covalent or metallic, which depends mostly on electronegativity. Then, for covalent molecules, you draw a Lewis structure, use formal charge and resonance to pick the best one, and count electron groups on the central atom. VSEPR turns that count into a three-dimensional shape and a set of bond angles, and the shape then tells you whether the molecule is polar, which feeds straight into Unit 3 on intermolecular forces.

The exam rewards a clear chain of reasoning more than memorized facts. A typical question gives you a formula and asks for the geometry, the bond angle, the hybridization or the polarity. Each answer depends on the step before it, so one miscounted lone pair sinks the whole chain, but if you can draw an accurate Lewis structure every time, most of this unit falls into place.

The unit in a minute

One line per topic. Tap any line for the full notes.

  1. Bond types and electronegativityIonic bonds have full charges from electron transfer; polar covalent bonds have partial charges from unequal sharing; identical atoms share equally.
  2. Coulomb's law, lattice energy and solidsRank lattice energy by charge first, then by ion size; always name both factors when you explain.
  3. Bond length, bond energy and bond orderHigher bond order means a shorter, stronger bond; the bond length sits at the bottom of the potential energy curve.
  4. Lewis structures, formal charge and expanded octetsCount electrons first, then use formal charge near zero to choose structures; only period 3 and lower atoms expand their octets.
  5. Resonance and delocalized electronsA resonance hybrid has identical, in-between bonds; average the bond order across positions to predict length and strength.
  6. VSEPR: from electron groups to shapesCount all groups for electron geometry, then name the shape from atom positions only; each lone pair squeezes the bond angles.
  7. Polarity and dipole momentPolar bonds plus an unsymmetric shape make a polar molecule; symmetric shapes with identical outer atoms cancel to zero.
  8. Hybridization, sigma and pi bonds, and MO theoryGroups equal hybrid orbitals; every bond has one sigma, and extra bonds are pi; MO theory explains why O2 is paramagnetic.
Grind Compound Structure and Properties questionsAlready know this? Skip the notes and prove it.

The big ideas

Coulomb's law drives every bond

Ionic lattices, covalent bonds and metallic bonds are all attractions between opposite charges, and larger charges at shorter distances mean stronger attraction. You use this to rank lattice energies (MgO beats NaF because 2+ and 2− beat 1+ and 1−), to explain bond energies, and to explain why atoms settle at a set bond length. When a question says "explain", the answer almost always names charge and distance.

The Lewis structure is the foundation

Geometry, bond angle, hybridization, bond order and polarity all come from the Lewis structure. If you put the wrong number of lone pairs on the central atom, every later answer is wrong too. Count valence electrons carefully, check octets, allow expanded octets only for atoms in period 3 or below, and use formal charge to choose between options.

Electron groups repel, and lone pairs repel the most

VSEPR says electron groups around a central atom spread out as far as possible. The number of groups sets the electron geometry, while the number of those groups that are lone pairs sets the molecular shape. Lone pairs take up more room than bonding pairs, so each lone pair pushes the bonded atoms closer together and shrinks the bond angle.

Shape decides polarity

A polar bond is not enough to make a polar molecule, because bond dipoles are vectors that can cancel. CO2, BF3 and CCl4 all have polar bonds but zero net dipole because their shapes are symmetric. Bent and pyramidal molecules such as H2O, SO2 and NH3 cannot cancel, so they are polar.

More shared electrons means shorter, stronger bonds

Bond order is the number of electron pairs shared between two atoms. A higher bond order pulls the nuclei closer together and takes more energy to break. Resonance gives fractional bond orders, such as 1.5 in benzene and ozone, and those bonds have lengths and strengths between the single and double values.

Study notes

8 topics. Each one opens with its key idea, then the detail you need to use it.

1. Bond types and electronegativity

Key idea: Ionic bonds have full charges from electron transfer; polar covalent bonds have partial charges from unequal sharing; identical atoms share equally.

Electronegativity measures how strongly an atom pulls shared electrons toward itself. Fluorine is the highest at about 4.0, and values rise toward the upper right of the periodic table, so the difference in electronegativity between two bonded atoms tells you how evenly they share.

When two identical atoms bond, as in H2 or Cl2, the difference is zero and the sharing is equal, which makes a nonpolar covalent bond. When two different nonmetals bond, as in H–F or O–H, the more electronegative atom pulls the electrons closer and gets a partial negative charge (δ−), while its partner gets a partial positive charge (δ+). That is a polar covalent bond. When the difference is very large, usually a metal with a nonmetal, the electron is effectively transferred, which leaves ions with full charges, such as Na+ and Cl−, held together by an ionic bond.

You may see a cutoff of about 1.7 on the Pauling scale for "ionic". Treat it as a rough guide, because bond character is a continuum and even NaCl has a little covalent character. The key distinction the exam tests is simple: ionic means full charges from transfer, and polar covalent means partial charges from unequal sharing.

In metallic bonding, the third type, metal atoms give up their valence electrons into a shared "sea" that moves freely around a lattice of cations. Those mobile electrons explain why metals conduct electricity and can be hammered into sheets without shattering.

2. Coulomb's law, lattice energy and solids

Key idea: Rank lattice energy by charge first, then by ion size; always name both factors when you explain.

Lattice energy is the energy released when gaseous ions come together to form one mole of an ionic solid. A larger lattice energy means stronger attraction, which shows up as a higher melting point, and Coulomb's law sets its size: the force grows with the product of the ion charges (q1 × q2) and falls as the distance between ion centers grows.

Charge usually matters more than size. NaF has 1+ and 1− ions, so its charge product is 1. CaO and MgO both have 2+ and 2− ions, so their charge product is 4. NaF therefore has the lowest lattice energy, about 920 kJ/mol. Between the two oxides, Mg2+ is smaller than Ca2+, so the ions in MgO sit closer together, which gives MgO the highest lattice energy, close to 3800 kJ/mol. The order is NaF < CaO < MgO.

Ionic solids are hard and brittle because a small shift lines up like charges, which then repel and crack the crystal. They conduct only when melted or dissolved, when the ions can move.

Other solids follow their own bonding. In diamond, each carbon forms four covalent bonds to other carbons in a network that runs through the whole crystal. Melting it means breaking covalent bonds, so its melting point is extremely high. Alloys come in two types. In substitutional alloys like brass, atoms of similar size replace each other. In interstitial alloys like steel, small carbon atoms fill gaps between iron atoms, which makes the metal harder and less malleable.

3. Bond length, bond energy and bond order

Key idea: Higher bond order means a shorter, stronger bond; the bond length sits at the bottom of the potential energy curve.

Picture two hydrogen atoms moving toward each other. At long range, each nucleus attracts the other atom's electron, so potential energy drops, but if they get too close, the two nuclei repel strongly and energy shoots up. The atoms settle at the distance where potential energy is lowest, and that distance is the bond length. The depth of the energy well is the bond energy, the energy needed to break the bond.

Bond order is the number of shared electron pairs between two atoms. A single bond has order 1, a double bond 2 and a triple bond 3. The more electrons shared between the nuclei, the closer they are pulled and the tighter they are held, so as bond order goes up, bond length goes down and bond energy goes up.

Carbon shows the trend clearly: a C–C single bond is about 154 pm long, C=C is about 134 pm, and C≡C is about 120 pm. Their bond energies climb from roughly 350 to 610 to 840 kJ/mol. Nitrogen gas, N2, has a triple bond with a bond energy near 945 kJ/mol, which is why N2 is so unreactive and why reactions that make N2 release so much energy.

Notice that a double bond is not twice as strong as a single bond, because the second bond is a pi bond, which overlaps less than the first sigma bond. Atom size matters too, because larger atoms form longer bonds, so H–I is longer and weaker than H–F.

4. Lewis structures, formal charge and expanded octets

Key idea: Count electrons first, then use formal charge near zero to choose structures; only period 3 and lower atoms expand their octets.

To draw a Lewis structure, first add up the valence electrons of every atom, then add one for each negative charge and subtract one for each positive charge. Put the least electronegative atom in the center, but never hydrogen. Connect each outer atom with a single bond, complete the outer atoms' octets, and place any leftover electrons on the central atom. If the central atom is still short of eight, turn outer lone pairs into double or triple bonds.

When more than one structure works, formal charge picks the best one. It equals the atom's valence electrons, minus its lone-pair electrons, minus half its bonding electrons. The best structure has formal charges as close to zero as possible, and any needed negative charge should sit on the most electronegative atom. In CO2, the structure O=C=O gives every atom a formal charge of zero. The alternative with one triple bond and one single bond gives O charges of +1 and −1, so it is worse.

Atoms in period 2 (C, N, O, F) can never hold more than eight electrons because they have only 2s and 2p orbitals. Atoms in period 3 and below are larger and can hold more, which is called an expanded octet. Phosphorus has 10 electrons in PCl5 and sulfur has 12 in SF6. In XeF4, xenon has four bonds and two lone pairs, also 12. Boron is the common exception in the other direction: BF3 leaves boron with only six electrons.

5. Resonance and delocalized electrons

Key idea: A resonance hybrid has identical, in-between bonds; average the bond order across positions to predict length and strength.

Some molecules cannot be shown by one Lewis structure. Ozone, O3, can be drawn with the double bond on the left or on the right. Neither picture is true on its own, because the real molecule is a resonance hybrid, a blend of both, and it does not flip back and forth. Both O–O bonds in ozone are identical, each with a bond order of 1.5.

To find the bond order in a resonance hybrid, add up the bonds between the equivalent atom pairs and divide by the number of equivalent positions. Nitrate, NO3−, has one double bond and two single bonds spread over three N–O positions, which is 4 bonds over 3 positions, so each N–O bond has order 1.33. Carbonate, CO3 2−, works the same way, and these bonds are longer than a true double bond but shorter than a true single bond.

Benzene, C6H6, is the classic case. You can draw it as a ring of alternating single and double bonds in two ways. Count the C–C bonds in one drawing: three single and three double make 9 bonds over 6 C–C positions, so each has a bond order of 1.5. The real molecule has six identical C–C bonds about 139 pm long, between the 154 pm single bond and the 134 pm double bond.

Resonance also makes benzene more stable. Its pi electrons are delocalized over all six carbons instead of being confined between two. Spreading electrons over a larger region lowers their energy, and this drop is called the resonance or delocalization energy. So benzene is lower in energy than a ring with fixed single and double bonds would be.

6. VSEPR: from electron groups to shapes

Key idea: Count all groups for electron geometry, then name the shape from atom positions only; each lone pair squeezes the bond angles.

Count the electron groups around the central atom, where a lone pair is one group and a single, double or triple bond also counts as one group. The groups spread as far apart as they can. Two groups give a linear arrangement at 180°, three give trigonal planar at 120°, four give tetrahedral at 109.5°, five give trigonal bipyramidal at 90° and 120°, and six give octahedral at 90°.

That arrangement is the electron geometry, while the molecular geometry describes only where the atoms are, so lone pairs are invisible in the name. With four groups, CH4 is tetrahedral, NH3 and NF3 are trigonal pyramidal, and H2O is bent. With three groups and one lone pair, SO2 is bent.

Lone pairs also change bond angles because a lone pair is held by only one nucleus, so its electron cloud spreads wider than a bonding pair, which is pinned between two nuclei. Repulsion runs lone pair–lone pair > lone pair–bond pair > bond pair–bond pair. So CH4 has 109.5°, NH3 with one lone pair has about 107°, and H2O with two has about 104.5°.

For five groups, lone pairs go in the equatorial positions, where they have more room. One lone pair gives a see-saw (SF4), two give T-shaped (ClF3) and three give linear (XeF2). For six groups, one lone pair gives square pyramidal (BrF5). Two lone pairs sit opposite each other and leave the four atoms in one plane, which is why XeF4 is square planar.

7. Polarity and dipole moment

Key idea: Polar bonds plus an unsymmetric shape make a polar molecule; symmetric shapes with identical outer atoms cancel to zero.

A dipole moment measures how much a molecule's charge is separated into a positive end and a negative end. To decide whether a molecule is polar, you need two things: polar bonds and a shape that does not let their dipoles cancel.

Think of each polar bond as an arrow pointing toward the more electronegative atom, and then add the arrows. In CO2, the two C=O arrows point in exactly opposite directions along a straight line, so they cancel and the net dipole is zero. In BF3, three equal arrows at 120° in a flat triangle cancel. In CCl4, four equal arrows pointing to the corners of a tetrahedron cancel. All three molecules have polar bonds, but none of them is a polar molecule.

Now add a lone pair: in SO2, the lone pair on sulfur bends the molecule. The two S–O arrows both tilt the same way, so they do not cancel and SO2 is polar. H2O is bent for the same reason and NH3 and NF3 are pyramidal, so all three are polar.

Symmetry can also fail when the outer atoms differ. CH2Cl2 has the same tetrahedral shape as CCl4, but its C–H and C–Cl bonds pull by different amounts, so the arrows no longer balance and CH2Cl2 is polar.

A quick test: if the central atom has no lone pairs and all outer atoms are the same, the molecule is nonpolar. XeF4 is a special case that still cancels, because its two lone pairs sit opposite each other.

8. Hybridization, sigma and pi bonds, and MO theory

Key idea: Groups equal hybrid orbitals; every bond has one sigma, and extra bonds are pi; MO theory explains why O2 is paramagnetic.

Hybridization explains how atomic orbitals point in the directions VSEPR predicts. The number of electron groups equals the number of hybrid orbitals, so two groups means sp, three means sp2 and four means sp3. Carbon is sp3 in CH4, sp2 in ethylene (C2H4) and sp in ethyne (C2H2).

A sigma bond forms from head-on overlap along the line between two nuclei. Every single, double or triple bond contains exactly one sigma bond. A pi bond forms when leftover, unhybridized p orbitals overlap side by side. Its electron density sits above and below the line between the nuclei, and the pi bond stops the two atoms from rotating. A double bond is one sigma and one pi, and a triple bond is one sigma and two pi. Ethyne, HC≡CH, has two C–H sigma bonds plus one sigma and two pi in the triple bond, so 3 sigma and 2 pi.

Hybridization can fail for heavier atoms. H2S has a bond angle of about 92°, not near 104.5° like water, because sulfur bonds mostly with its plain 3p orbitals, which sit at 90° to each other.

Molecular orbital theory goes further, letting electrons fill bonding and antibonding orbitals that span the whole molecule. The AP course description treats it as background, so the exam does not ask you to draw or fill MO diagrams. Its biggest win is O2, whose Lewis structure shows every electron paired, but MO theory puts two unpaired electrons in separate π* orbitals. That makes O2 paramagnetic, so liquid oxygen sticks to a magnet. As optional enrichment, MO bond order equals bonding electrons minus antibonding electrons, divided by 2, which gives N2 a bond order of 3 with no unpaired electrons.

Common mistakes

Drawn from the wrong answers students actually pick on these questions.

Naming the electron geometry instead of the molecular shape, such as calling NF3 or NH3 trigonal planar like BF3.

Count lone pairs on the central atom first. BF3 and AlCl3 have three groups and no lone pairs, so they are trigonal planar. NF3 has three bonds plus one lone pair, which makes four groups and a trigonal pyramidal shape.

Treating all four-group molecules as having the same bond angle, or mixing up the 107° and 104.5° values.

Each lone pair squeezes the angle more. CH4 with no lone pairs is 109.5°, NH3 with one is about 107° and H2O with two is about 104.5°. BF3, with three groups and no lone pairs, is 120°.

Counting only the bonds between carbons when asked for sigma and pi bonds, which gives answers like 2 sigma and 2 pi for ethyne.

Count every bond, including C–H bonds. Each bond has exactly one sigma; a double bond adds one pi and a triple bond adds two. Ethyne has 3 sigma and 2 pi.

Assuming a molecule with polar bonds must be polar, so picking CO2, BF3 or CCl4 as polar.

Add the bond dipoles as arrows. Linear, trigonal planar and tetrahedral shapes with identical outer atoms cancel exactly. Look for a lone pair on the central atom or mixed outer atoms before calling a molecule polar.

Swapping the definitions of ionic and polar covalent bonds, or saying polar covalent bonds form between identical atoms.

Ionic bonds come from full transfer and give full charges. Polar covalent bonds come from unequal sharing between atoms with different electronegativities, usually two different nonmetals, and give partial charges. Identical atoms share equally, which is nonpolar covalent. Neither type is always stronger; some ionic lattices are extremely strong.

Picking see-saw or square pyramidal for XeF4, or explaining H2S's 92° angle by more lone pairs or a bigger atom.

Count groups before choosing a shape. XeF4 has six groups with two lone pairs, so it is square planar; see-saw needs five groups and one lone pair, and square pyramidal needs six groups and one. H2S has two lone pairs, like water; its small angle comes from sulfur bonding through nearly pure 3p orbitals at about 90°.

How this unit shows up on the exam

This unit is about 7–9% of the AP Chemistry exam, but its skills show up in nearly every other unit. Polarity feeds intermolecular forces in Unit 3, and Lewis structures appear in acid-base and reaction questions.

Multiple-choice stems are short and direct. They ask which molecule has a bond angle closest to 107°, which species is polar, what the molecular geometry of XeF4 is, or how many sigma and pi bonds a molecule contains. The wrong answers are built from predictable slips, such as ignoring lone pairs, forgetting C–H bonds or confusing electron geometry with shape. Harder items give you two or three Lewis structures and ask which one formal charge favors, or ask you to rank lattice energies or bond lengths and pick the reason.

Free-response questions chain these steps. A typical part asks you to draw a complete Lewis structure, including every lone pair, and the next part asks for the geometry or the bond angle, then the hybridization, then a comparison of bond lengths. Readers check that your later answers match your own drawing, so a correct structure earns you a lot.

"Explain" and "justify" questions reward specific reasoning tied to particles. For lattice energy or melting point, name the ion charges and the ion sizes and connect them to Coulombic attraction. Saying a compound is "more stable" earns nothing on its own. For bond length in a resonance structure, give the bond order and say the electrons are delocalized. For polarity, say the shape is asymmetric and the bond dipoles do not cancel. You may also see a potential energy curve and be asked to mark the bond length or bond energy.

How the exam actually asks it

Real items from the AP Chemistry bank, easier first. The answer is marked, and every wrong choice is explained — because knowing why a distractor is tempting is most of the work.

Worked example 1Easier
Which of the following molecules has a bond angle closest to ?
  1. A
  2. B
  3. C
  4. DCorrect

Why D is right

Ammonia () has one lone pair on nitrogen and three bonding pairs — four total electron groups. The lone pair compresses the bond angle from the ideal tetrahedral to approximately . has two lone pairs, compressing its angle to . (ideal ) and (trigonal planar, ) have different angles.
Why the other 3 choices miss
A
Incorrect. has trigonal planar geometry with three bonding pairs and no lone pairs on boron, giving bond angles of exactly .
B
Incorrect. has two lone pairs on oxygen, compressing the bond angle to approximately , not .
C
Incorrect. has no lone pairs on carbon; all four electron groups are bonding, giving the ideal tetrahedral angle of .
Worked example 2Easier
Which of the following molecules is polar (has a net dipole moment)?
  1. ACO2
  2. BCCl4
  3. CBF3
  4. DSO2Correct

Why D is right

SO2 has a bent molecular geometry (one lone pair on S, two bonding pairs to O — actually S has 2 lone pairs in the VSEPR count or 1 — but the bent shape with nonzero dipole vectors that do not cancel gives a net dipole moment). CCl4 (tetrahedral, symmetrical, dipoles cancel), BF3 (trigonal planar, symmetrical, dipoles cancel), and CO2 (linear, dipoles cancel) all have net zero dipole moments due to symmetric arrangements.
Why the other 3 choices miss
A
Incorrect. CO2 is linear (sp hybridized carbon); the two C=O dipoles point in exactly opposite directions and cancel, giving zero net dipole moment.
B
Incorrect. CCl4 is tetrahedral with four equivalent C-Cl bonds; the individual dipoles point symmetrically and cancel, giving no net dipole moment.
C
Incorrect. BF3 is trigonal planar with three equivalent B-F bonds at 120° angles; the dipoles cancel symmetrically, giving zero net dipole moment.
Worked example 3Easier
Which of the following molecules has a trigonal pyramidal molecular geometry?
  1. ABF3
  2. BAlCl3
  3. CNF3Correct
  4. DSO3

Why C is right

NF3 (nitrogen trifluoride) has nitrogen as the central atom with 3 bonding pairs and 1 lone pair — 4 total electron groups. Tetrahedral electron geometry with one lone pair gives a trigonal pyramidal molecular geometry, like ammonia. BF3, SO3, and AlCl3 all have three electron groups and no lone pairs on the central atom, giving trigonal planar molecular geometry.
Why the other 3 choices miss
A
Incorrect. BF3 has 3 bonding pairs and no lone pairs on B; three electron groups give trigonal planar geometry, not trigonal pyramidal.
B
Incorrect. AlCl3 has 3 bonding pairs and no lone pairs on Al; like BF3, it is trigonal planar.
D
Incorrect. SO3 has three S=O bonds and no lone pairs on S (in the expanded-octet structure); it adopts trigonal planar geometry.
Worked example 4Easier
Which of the following correctly distinguishes between ionic bonding and polar covalent bonding?
  1. APolar covalent bonds are always stronger than ionic bonds because shared electrons create more stability.
  2. BIonic bonds only form between metals and nonmetals, while polar covalent bonds only form between identical nonmetal atoms.
  3. CIonic bonds result from complete electron transfer, giving full +/- charges on ions; polar covalent bonds involve unequal sharing of electrons with partial charges.Correct
  4. DIonic bonds involve partial charge separation (delta+ and delta-), while polar covalent bonds involve complete transfer of electrons.

Why C is right

In ionic bonding, electronegativity differences are large (typically > 1.7 on the Pauling scale) and electrons transfer completely from one atom to another, forming ions with full +1, +2, -1, etc. charges. In polar covalent bonding, electronegativity differences are intermediate (0.5–1.7), and electrons are shared unequally, producing partial charges (delta+ and delta-).
Why the other 3 choices miss
A
Incorrect. Bond strength comparisons between ionic and covalent bonds depend on specific species; ionic compounds can have very high lattice energies that make them highly stable, and no universal statement that polar covalent is always stronger is valid.
B
Incorrect. While ionic bonds most commonly form between metals and nonmetals, polar covalent bonds form between different nonmetal atoms (like H-F, O-H), not between identical atoms (which would be nonpolar covalent).
D
Incorrect. This reverses the definitions; ionic bonds involve COMPLETE electron transfer (full charges), while polar covalent bonds involve partial charge separation.

Can you do all of these?

Tick what you can do without looking. Anything left unticked is where to go back to.

0 of 10 ticked

Ready to test yourself?

Open practice pulls from the 45 free questions in this unit. The other 250 come with the one-time AP purchase, which unlocks every AP course.

Official topic list

The official course framework breaks this unit into 7 numbered topics.

  1. 2.1Types of Chemical Bonds
  2. 2.2Intramolecular Force and Potential Energy
  3. 2.3Structure of Ionic Solids
  4. 2.4Structure of Metals and Alloys
  5. 2.5Lewis Diagrams
  6. 2.6Resonance and Formal Charge
  7. 2.7VSEPR and Hybridization

Key terms in Compound Structure and Properties

Ordered by how often our reviewed questions test them. Open any term to see the questions that use it.

VSEPR72 questionsBond order45 questionsMolecular geometry37 questionsResonance31 questionsHybridization30 questionsExpanded octet29 questionsLewis structure27 questionsLone pairs25 questionsFormal charge22 questionsBond length18 questionsPolarity18 questionsDipole moment17 questionsElectronegativity17 questionsLattice energy17 questionsMolecular orbital theory16 questionsBond angle14 questionsMetallic bonding11 questionsTriple bond11 questionsBenzene10 questionsParamagnetism10 questionsLone pair repulsion9 questionsBond energy8 questionsCoulombs law8 questionsDiamond8 questionsIonic bonding8 questionsMO theory8 questionsNitrogen8 questionsPi bond8 questionsSquare planar8 questionsT shaped8 questionsBond angles7 questionsBond strength7 questionsCoordinate covalent bond7 questionsDelocalization7 questionsLinear geometry7 questionsMolecular polarity7 questionsOctahedral7 questionsBF36 questionsBond polarity6 questionsConductivity6 questionsDelocalized electrons6 questionsElectrical conductivity6 questionsElectron sea6 questionsIonic compounds6 questionsOrbital overlap6 questionsPCl56 questionsSF66 questionsSigma bond6 questionsSigma bonds6 questionsSO36 questionsSp26 questionsSymmetry6 questionsTetrahedral6 questionsElectron geometry5 questionsIonic solid5 questionsLewis structures5 questionsNetwork covalent5 questionsOxygen5 questionsOzone5 questionsPi bonds5 questionsSO25 questionsTrigonal bipyramidal5 questionsTrigonal planar5 questionsBond dissociation energy4 questionsCovalent network4 questionsDiatomic molecules4 questionsElectronegativity difference4 questionsLewis acid4 questionsLewis acid base4 questionsNH34 questionsOctet rule4 questionsSee saw4 questionsSF44 questionsSp3d24 questionsAcetylene3 questionsAllotropes3 questionsAmmonium ion3 questionsBand theory3 questionsBond type3 questionsCarbon dioxide3 questionsCarbon monoxide3 questionsCarbonate ion3 questionsCation size3 questionsCharge density3 questionsClF33 questionsComplex ions3 questionsD orbitals3 questionsDative bond3 questionsDouble bond3 questionsEthylene3 questionsH2S3 questionsIonic vs covalent3 questionsMalleability3 questionsNitrate ion3 questionsPolar covalent3 questionsPolymer3 questionsSingle double triple3 questionsSp33 questionsSquare pyramidal3 questionsSulfate3 questionsThiocyanate3 questionsTrigonal pyramidal3 questionsXeF23 questionsXeF43 questions

The rest of AP Chemistry

Every unit with its share of the exam. You are on Unit 2.

  1. 1Atomic Structure and Properties9% of exam
  2. 2Compound Structure and Properties9% of exam
  3. 3Properties of Substances and Mixtures20% of exam
  4. 4Chemical Reactions9% of exam
  5. 5Kinetics9% of exam
  6. 6Thermochemistry9% of exam
  7. 7Equilibrium9% of exam
  8. 8Acids and Bases17% of exam
  9. 9Thermodynamics and Electrochemistry9% of exam