Skip to content

Unit 4 of 9

Chemical Reactions

9% of the exam98 reviewed questions30 key terms19 min read

Chemical Reactions is worth about 9% of the AP Chemistry exam. Our bank tests it with 98 reviewed questions across 30 distinct ideas — 41 easier, 43 medium and 14 harder.

On this page · 12 sections

Unit 4 is where chemistry turns into bookkeeping you can check. A balanced equation is a recipe written in moles, so it tells you exactly how much of each substance reacts and forms. Almost every question in this unit asks you to do one of two jobs. You either read an equation to predict what happens, or you use it to count how much. Stoichiometry is the counting job, and it shows up in more than half of the questions we see on this unit.

The other half of the unit sorts reactions into three families by what actually moves. In precipitation reactions, ions in solution find a partner and drop out as a solid. In acid-base reactions, a proton (H⁺) moves from one species to another. In redox reactions, electrons move, and oxidation states tell you where they went. Net ionic equations tie the families together, because they strip away the spectator ions and show only the particles that change.

The pieces connect in a fixed order. You decide which species really react, write the net ionic equation, balance it, and then run moles through the coefficients. Questions about precipitate mass, gas volume at STP and percent yield are all the same skill wearing different labels. Atom economy is a separate job, because it is a mass ratio you read straight from the balanced equation, not a calculation from the amounts you are given. If your equation is wrong, every number after it is wrong, so most points in this unit are won or lost at the equation.

The unit in a minute

One line per topic. Tap any line for the full notes.

  1. The mole road mapGrams never go straight to grams. Convert to moles, use the coefficient ratio, then convert back.
  2. Limiting reagent and percent yieldDivide moles by coefficients to find the limiting reagent, and calculate the product only from it.
  3. Dissolving, spectator ions and net ionic equationsSplit only strong electrolytes into ions, cancel what is identical on both sides, and check that charge balances.
  4. Precipitation stoichiometryMoles of each ion = M × V. Apply the limiting reagent through the net ionic ratio, and use the combined volume for leftover concentrations.
  5. Acid-base and gas-forming reactionsFor two ionic solutions swapping partners, no precipitate, water, gas or weak electrolyte means no reaction. Redox runs on electron transfer instead, and carbonate plus acid gives CO₂ gas through unstable H₂CO₃.
  6. Oxidation states and the agents of redoxRising oxidation state means oxidized and makes it the reducing agent. Falling means reduced and makes it the oxidizing agent.
  7. Balancing redox in acidic solutionBalance atoms, then O with H₂O, then H with H⁺, then charge with electrons, then match electrons before adding.
  8. Reaction types, the activity series and atom economyActivity series: a higher metal reduces a lower metal's ions. Atom economy uses masses of the desired product, never molecule counts.
Grind Chemical Reactions questionsAlready know this? Skip the notes and prove it.

The big ideas

Coefficients count moles, not grams

The numbers in front of formulas are mole ratios. In N₂ + 3 H₂ → 2 NH₃, one mole of nitrogen reacts with three moles of hydrogen to make two moles of ammonia. Those ratios never apply to grams, because each substance has a different molar mass. That is why every stoichiometry problem passes through moles: convert what you are given into moles, use the ratio, then convert back into whatever unit the question wants.

Only the particles that change belong in the equation

When ionic compounds dissolve, they split into separate ions. Many of those ions never do anything, so they show up unchanged on both sides of the full ionic equation. These are spectator ions, and you cancel them. What is left is the net ionic equation, which shows the real event: a solid forming, water forming, a gas escaping, or electrons moving. A reaction with nothing left after cancelling did not happen at all.

Electrons are conserved, just like atoms

In a redox reaction, every electron one species loses is gained by another. Oxidation states are a bookkeeping tool that shows who lost and who gained. When you balance a redox equation, you must balance three things: atoms, charge, and the electrons passed between the half-reactions. If the electrons lost do not equal the electrons gained, the equation is wrong even if the atoms look balanced.

A reaction runs until one reactant runs out

Real reactions rarely start with ingredients in perfect proportion. The reactant that is used up first is the limiting reagent, and it alone decides how much product can form. The theoretical yield comes from the limiting reagent. What you collect in the lab is usually less, and percent yield measures the gap. Atom economy asks a different question: even at perfect yield, how much of the reactant mass ends up in the product you actually want?

Study notes

8 topics. Each one opens with its key idea, then the detail you need to use it.

1. The mole road map

Key idea: Grams never go straight to grams. Convert to moles, use the coefficient ratio, then convert back.

Every stoichiometry problem follows the same path: given quantity, then moles of the given substance, then the mole ratio, then moles of the wanted substance, and finally the wanted quantity. Only the middle step uses the balanced equation. The outer conversions use molar mass for grams, molarity times volume for solutions, and 22.4 L/mol for an ideal gas at STP, which means 0 °C and 1 atm.

Try it on CaCO₃(s) → CaO(s) + CO₂(g), starting with 25.0 g of calcium carbonate. The molar mass of CaCO₃ is 40.1 + 12.0 + 3(16.0) = 100.1 g/mol, so you have 0.250 mol. Because the ratio is 1:1, 0.250 mol of CaO forms, and at 56.1 g/mol that is 14.0 g of calcium oxide. The same 0.250 mol of carbon dioxide has a mass of 11.0 g, and at STP it occupies 0.250 × 22.4 = 5.60 L. Notice that 14.0 g plus 11.0 g equals the original 25.0 g, so conservation of mass gives you a quick way to check your arithmetic.

The road map also runs backwards in combustion analysis. Suppose burning a hydrocarbon produces 0.440 g of CO₂ and 0.270 g of H₂O. Every carbon atom ends up in carbon dioxide, so 0.440 ÷ 44.0 gives 0.0100 mol of carbon. Every water molecule carries two hydrogen atoms, so 0.0150 mol of water means 0.0300 mol of hydrogen. The carbon-to-hydrogen ratio is therefore 1:3, which makes the empirical formula CH₃.

2. Limiting reagent and percent yield

Key idea: Divide moles by coefficients to find the limiting reagent, and calculate the product only from it.

When a question gives you amounts of two reactants, you must work out which one runs out first. Picking the smaller mass is unreliable, and even picking the smaller number of moles fails, because the coefficients change how much of each reactant is needed.

Take 2 Al + 3 Cl₂ → 2 AlCl₃ with 5.40 g of aluminum and 14.2 g of chlorine. Both amounts work out to 0.200 mol, so at a glance they look evenly matched. However, aluminum needs 1.5 mol of chlorine for every mole of aluminum, so using all 0.200 mol of Al would require 0.300 mol of Cl₂. You only have 0.200 mol, which makes chlorine the limiting reagent. A dependable shortcut is to divide each reactant's moles by its coefficient: aluminum gives 0.100 and chlorine gives 0.0667, and the smaller result identifies the limiting reagent.

Now run the limiting reagent through the ratio: 0.200 mol Cl₂ × (2/3) = 0.133 mol of AlCl₃. At 133.3 g/mol that rounds to 17.8 g, which is the theoretical yield. If the experiment actually collects 15.1 g, the percent yield using the rounded 17.8 g is 15.1 ÷ 17.8 × 100 = 84.8%. A percent yield above 100% signals an experimental error, such as a product that was weighed while still wet. Meanwhile, the excess reactant remains unused, so 0.200 − 0.133 = 0.067 mol of aluminum is left over.

3. Dissolving, spectator ions and net ionic equations

Key idea: Split only strong electrolytes into ions, cancel what is identical on both sides, and check that charge balances.

Soluble ionic compounds, strong acids and strong bases separate into ions when they dissolve in water. To write a net ionic equation, you write each of these as separate ions, but you keep solids, liquid water, gases and weak electrolytes such as acetic acid or ammonia in their combined form. Then you cancel any species that appears identically on both sides.

For silver nitrate mixed with sodium chloride, the complete ionic equation is Ag⁺ + NO₃⁻ + Na⁺ + Cl⁻ → AgCl(s) + Na⁺ + NO₃⁻. Sodium and nitrate appear unchanged on both sides, so they are spectators. That leaves the net ionic equation Ag⁺(aq) + Cl⁻(aq) → AgCl(s).

Spectator ions are not limited to precipitation reactions. In 2 Al(s) + 3 CuSO₄(aq) → Al₂(SO₄)₃(aq) + 3 Cu(s), sulfate is the only spectator, because aluminum and copper both change oxidation state and therefore are the reaction. The net equation is 2 Al(s) + 3 Cu²⁺(aq) → 2 Al³⁺(aq) + 3 Cu(s), and its charge balances at +6 on each side.

The AP exam expects you to memorize one set of solubility rules: every compound containing Na⁺, K⁺, NH₄⁺ or NO₃⁻ is soluble. Other solubility information is usually provided or can be inferred from the question. On particle diagrams, spectator ions appear floating separately in the solution both before and after mixing.

4. Precipitation stoichiometry

Key idea: Moles of each ion = M × V. Apply the limiting reagent through the net ionic ratio, and use the combined volume for leftover concentrations.

Mixing two solutions is really a limiting-reagent problem in disguise. Each solution supplies moles equal to its molarity multiplied by its volume in liters, and the net ionic equation gives the ratio in which the ions combine.

Suppose you mix 40.0 mL of 0.100 M silver nitrate with 30.0 mL of 0.200 M sodium chloride. The silver solution supplies 0.0400 L × 0.100 M = 0.00400 mol of Ag⁺, while the chloride solution supplies 0.00600 mol of Cl⁻. Since the ratio is 1:1, silver runs out first, producing 0.00400 mol of AgCl, which at 143.3 g/mol is 0.573 g of precipitate. Using chloride's moles instead gives 0.860 g, a classic trap answer, because there is not enough silver to make that much solid.

Watch carefully for ratios other than 1:1. In Pb²⁺(aq) + 2 I⁻(aq) → PbI₂(s), each lead ion needs two iodide ions, and in the formation of calcium phosphate the ratio of Ca²⁺ to PO₄³⁻ is 3:2. You can always derive these ratios from the ion charges, because the solid must be electrically neutral.

After the precipitate forms, the excess ion stays dissolved. In this example, 0.00200 mol of chloride remains in 70.0 mL of total volume, so its new concentration is 0.00200 ÷ 0.0700 = 0.0286 M. Questions often ask which ions remain after mixing, so always use the combined volume of both solutions.

5. Acid-base and gas-forming reactions

Key idea: For two ionic solutions swapping partners, no precipitate, water, gas or weak electrolyte means no reaction. Redox runs on electron transfer instead, and carbonate plus acid gives CO₂ gas through unstable H₂CO₃.

When two ionic solutions swap partners in a double-replacement reaction, something must pull ions out of solution. There are four driving forces: a precipitate, water, a gas, or another weak electrolyte. A weak acid counts, as in H⁺(aq) + C₂H₃O₂⁻(aq) → HC₂H₃O₂(aq), and so does a weak base, as in NH₄⁺(aq) + OH⁻(aq) → NH₃(aq) + H₂O(l). Mixing sodium chloride with potassium nitrate forms none of these and moves no electrons, so every ion is a spectator and no reaction occurs.

Redox reactions follow a different rule, because electron transfer drives them. Zn(s) + Cu²⁺(aq) runs because zinc hands electrons to copper ions, not because ions swap partners. Similarly, 2 Fe³⁺(aq) + 2 I⁻(aq) → 2 Fe²⁺(aq) + I₂(aq) runs even though no precipitate, water or gas forms.

In the Brønsted-Lowry model, an acid donates H⁺ and a base accepts it. When acetic acid gives its proton to water, it becomes its conjugate base, C₂H₃O₂⁻, and water becomes its conjugate acid, H₃O⁺. Water is amphoteric, because it can also act as an acid by giving a proton to NH₃ and becoming OH⁻.

In acid-base neutralization, a proton moves from the acid to the base. For a strong acid with a strong base, the net ionic equation is H⁺(aq) + OH⁻(aq) → H₂O(l), which forms water but no gas. Sulfuric acid adds a complication because each H₂SO₄ releases two protons, so the balanced equation is H₂SO₄ + 2 NaOH → Na₂SO₄ + 2 H₂O. Neutralizing 25.0 mL of 0.100 M sulfuric acid, which contains 0.00250 mol, therefore requires 0.00500 mol of sodium hydroxide. With 0.100 M NaOH, that is 50.0 mL rather than 25.0 mL.

This is the logic of a titration. At the equivalence point, the moles of titrant added equal the moles of analyte times the mole ratio from the balanced equation. In the sulfuric acid example, the equivalence point arrives at 50.0 mL of NaOH. An indicator's color change, or the steep jump on a pH curve, shows when you have reached it.

Carbonates react with acids in two stages. First, hydrogen ions combine with carbonate to form carbonic acid, H₂CO₃. Carbonic acid is unstable, so it immediately decomposes into liquid water and carbon dioxide gas, which bubbles out of solution. For sodium carbonate and hydrochloric acid, the net ionic equation is CO₃²⁻(aq) + 2 H⁺(aq) → H₂O(l) + CO₂(g). Solid carbonates such as limestone fizz the same way, although you keep CaCO₃(s) together in the equation.

6. Oxidation states and the agents of redox

Key idea: Rising oxidation state means oxidized and makes it the reducing agent. Falling means reduced and makes it the oxidizing agent.

Oxidation states are an accounting system for electrons, and you assign them with a short list of rules. Atoms in a pure element are 0, and fluorine is always −1. Oxygen is usually −2 but becomes −1 in peroxides such as H₂O₂. Hydrogen is +1 with nonmetals and −1 in metal hydrides, while Group 1 metals are +1 and Group 2 metals are +2. Finally, the oxidation states must add up to the overall charge of the species.

In potassium permanganate, KMnO₄, potassium is +1 and the four oxygens total −8, so manganese must be +7 for the compound to be neutral. In the dichromate ion, Cr₂O₇²⁻, the oxygens total −14 and the ion carries a −2 charge, so the two chromium atoms share +12 and each is +6. Similarly, sulfur in sulfuric acid is +6.

Oxidation means losing electrons, so the oxidation state increases, while reduction means gaining electrons, so the oxidation state decreases. The species that is oxidized is called the reducing agent, because it donates its electrons to something else. The species that is reduced is the oxidizing agent. In Zn(s) + Cu²⁺(aq) → Zn²⁺(aq) + Cu(s), zinc rises from 0 to +2 and acts as the reducing agent, while Cu²⁺ is the oxidizing agent. Permanganate is a favorite oxidizing agent on the exam because manganese at +7 is readily reduced to +2.

The same rules work for carbon. In ethanol, the carbon bonded to oxygen is −1, but in acetaldehyde it is +1, so each ethanol molecule loses two electrons.

7. Balancing redox in acidic solution

Key idea: Balance atoms, then O with H₂O, then H with H⁺, then charge with electrons, then match electrons before adding.

Simple redox equations can be balanced by inspection, but equations involving permanganate or dichromate require the half-reaction method. Here is the method for permanganate oxidizing oxalate to carbon dioxide in acidic solution.

First, split the reaction into an oxidation half, C₂O₄²⁻ → CO₂, and a reduction half, MnO₄⁻ → Mn²⁺. Second, balance every atom except oxygen and hydrogen, which turns the oxidation half into C₂O₄²⁻ → 2 CO₂. Third, balance oxygen by adding water, giving MnO₄⁻ → Mn²⁺ + 4 H₂O. Fourth, balance hydrogen by adding H⁺, giving MnO₄⁻ + 8 H⁺ → Mn²⁺ + 4 H₂O.

Fifth, balance charge by adding electrons. The left side of the manganese half totals +7 and the right side totals +2, so you add 5 e⁻ to the left. The oxalate half becomes C₂O₄²⁻ → 2 CO₂ + 2 e⁻. Sixth, make the electrons equal using the lowest common multiple, which is 10, so you double the manganese half and multiply the oxalate half by five. Seventh, add the halves and cancel, which produces 2 MnO₄⁻ + 16 H⁺ + 5 C₂O₄²⁻ → 2 Mn²⁺ + 10 CO₂ + 8 H₂O.

Check the charge: the left side totals −2 + 16 − 10 = +4, matching +4 on the right. Even a question asking for a single coefficient needs the whole method, because the electron step determines every number. Notice also that the 5 electrons match the change in manganese from +7 to +2.

8. Reaction types, the activity series and atom economy

Key idea: Activity series: a higher metal reduces a lower metal's ions. Atom economy uses masses of the desired product, never molecule counts.

Before you name a reaction type, decide whether a chemical change happened at all. Melting ice or dissolving sugar is a physical change, because the same molecules are still there. A chemical change breaks and forms bonds, so new substances appear.

Identifying the reaction type tells you which products to expect. In synthesis, two substances combine, as in 2 Mg + O₂ → 2 MgO. In decomposition, one substance breaks apart, as when heated CaCO₃ forms CaO and CO₂. Combustion of a hydrocarbon in oxygen produces carbon dioxide and water. Single replacement swaps an element for an ion, as in Zn + Cu²⁺ → Zn²⁺ + Cu, and every single replacement is also a redox reaction.

The activity series predicts whether a single replacement happens. A metal higher on the series gives up electrons more easily, so it can reduce the ions of any metal below it. Zinc metal therefore deposits copper from a Cu²⁺ solution, but copper metal placed in a Zn²⁺ solution does nothing. Metals above hydrogen, such as magnesium and zinc, release hydrogen gas from acids, while copper and silver do not.

Disproportionation is a special redox reaction in which one element is both oxidized and reduced. In 2 H₂O₂ → 2 H₂O + O₂, oxygen starts at −1, and part of it falls to −2 in water while the rest rises to 0 in oxygen gas.

Green chemistry asks how much reactant mass becomes the product you actually want. Atom economy equals the molar mass of the desired product times its coefficient, divided by the total molar mass of all reactants times their coefficients, times 100%. For making CaO from limestone, that is 56.1 ÷ 100.1 = 56.0%, because the CO₂ is waste.

Common mistakes

Drawn from the wrong answers students actually pick on these questions.

After mixing two solutions, you calculate the precipitate from whichever ion has more moles, or you add the two amounts together.

Only the limiting ion sets the amount of solid. Find each ion's moles from M × V, compare them through the net ionic ratio, and use the smaller supply. A trap answer often equals the excess ion's moles times the molar mass, which needs more of the other ion than the beaker holds.

You calculate the mass of the wrong product, such as CO₂ instead of CaO when CaCO₃ decomposes.

Circle the substance the question asks about before you start. Both products come from the same moles of CaCO₃, so both answers will look reasonable and both will appear as choices. Checking that the product masses add up to the starting mass catches mix-ups.

You think any two ionic solutions react when mixed, or you think neutralization gives off a gas.

When two ionic solutions swap partners, a reaction needs a driving force: a precipitate, water, a gas, or another weak electrolyte such as acetic acid or ammonia. NaCl + KNO₃ forms none of these and transfers no electrons, so nothing happens. Redox reactions are different, because electron transfer drives them. Strong acid plus strong base makes water but no gas. A gas forms when an acid meets a carbonate, because the H₂CO₃ that forms breaks down into CO₂.

You work out atom economy by counting molecules or atoms, for example calling 3 of 4 product molecules '75%'.

Atom economy is a mass ratio. Divide the molar mass of the desired product (times its coefficient) by the total molar mass of the reactants. Steam reforming, CH₄ + H₂O → CO + 3 H₂, has 3 of 4 product molecules as H₂ but only 6 ÷ 34 = 18% atom economy.

You assume atom economy is 100% because every atom shows up somewhere in the products, or because the byproduct is useful.

Atoms are always conserved, so that tells you nothing. Atom economy counts only the desired product. Making soap from a fat also makes glycerol, so the soap's atom economy is below 100% even though glycerol sells. Only a reaction whose single product is the one you want reaches 100%.

In combustion analysis you guess a familiar formula like CH₂, or you forget that each H₂O carries two hydrogen atoms.

Compute moles of C from CO₂ and moles of H from 2 × moles of H₂O, then take the ratio. Test any answer you are unsure of by working backwards: a CH₂ formula would need twice the moles of H that a CH formula needs, so it would produce twice the mass of water.

How this unit shows up on the exam

Unit 4 is weighted at about 7 to 9 percent of the AP Chemistry exam, but its skills appear well beyond that share. Equilibrium, acid-base and electrochemistry questions in later units all assume you can balance an equation and run moles through it. Multiple-choice questions have four answer choices, and in this unit the wrong choices are built from predictable errors. Expect a choice that uses the excess reactant, one that gives the mass of the other product, and one that skips the coefficient ratio. If your answer matches a choice, check it against these traps before moving on.

Typical stems are short. You may be asked which reaction produces a gas, what mass of precipitate forms when two solutions are mixed, or what the oxidation state of an element is in a polyatomic ion. Other stems ask for one coefficient in a balanced redox equation in acidic solution, or which species are spectators. Many questions use particle diagrams of beakers before and after mixing. Read which ions remain free and which are locked in a solid, and count particles to find the limiting reagent.

On the free-response section, Unit 4 usually appears inside a longer lab scenario. Common tasks are writing a net ionic equation, calculating moles of product from a titration or a gravimetric analysis, and finding percent yield. Readers reward a balanced equation that shows the correct species. Weak acids stay as molecules, solids are written as solids and spectators are left out. For calculations they want visible setup with units and a final answer consistent with that setup. For a 'justify' prompt, name the reason, such as 'Cl₂ is limiting because 0.200 mol Al would need 0.300 mol Cl₂'.

How the exam actually asks it

Real items from the AP Chemistry bank, easier first. The answer is marked, and every wrong choice is explained — because knowing why a distractor is tempting is most of the work.

Worked example 1Easier
Which of the following aqueous reactions produces a gas?
  1. A
  2. BCorrect
  3. C
  4. D

Why B is right

The reaction of sodium carbonate with hydrochloric acid produces carbon dioxide gas (), along with water and sodium chloride. The formation of carbonic acid () as an intermediate is unstable and decomposes to and .
Why the other 3 choices miss
A
Incorrect. This is a neutralization reaction producing water and a soluble salt, but no gas.
C
Incorrect. This is a double displacement reaction where all products are soluble, so no precipitate, gas, or water is formed. There is no driving force for this reaction.
D
Incorrect. This produces a precipitate ( is insoluble) but not a gas.
Worked example 2Easier
In the reaction , if of reacts with excess , how many grams of are theoretically produced?
  1. A
  2. BCorrect
  3. C
  4. D

Why B is right

Moles , approximately . From the balanced equation, produces . Moles . Mass , approximately .
Why the other 3 choices miss
A
Incorrect. would be of , suggesting an incorrect stoichiometric ratio instead of the correct ratio.
C
Incorrect. would be the mass of only of , but the stoichiometry produces per mol .
D
Incorrect. is the mass of the reactant, not the product. Mass is not conserved for a single product in a reaction with multiple reactants.
Worked example 3Easier
What is the oxidation state of manganese in KMnO4?
  1. A+5
  2. B+7Correct
  3. C+3
  4. D+4

Why B is right

In KMnO4: K = +1 (alkali metal), O = -2 (4 oxygens = -8). The sum must equal 0 (neutral compound): +1 + Mn + 4(-2) = 0. Mn = 0 - 1 + 8 = +7. Manganese has an oxidation state of +7 in potassium permanganate.
Why the other 3 choices miss
A
Incorrect. +5 would give a total charge of +1 + 5 + (-8) = -2, not zero.
C
Incorrect. +3 would give a total charge of +1 + 3 + (-8) = -4, not zero.
D
Incorrect. +4 is the oxidation state of Mn in MnO2, not in KMnO4. +4 would give +1 + 4 + (-8) = -3, not zero.
Worked example 4Easier
The percent yield of a reaction is . If the theoretical yield is of product, what is the actual yield?
  1. A
  2. B
  3. C
  4. DCorrect

Why D is right

. Rearranging: . The balanced equation, stoichiometry, or reaction pattern leads directly to the answer.
Why the other 3 choices miss
A
Incorrect. is the theoretical yield, which would only equal the actual yield at yield.
B
Incorrect. exceeds the theoretical yield. The actual yield cannot exceed the theoretical yield. This may result from dividing by .
C
Incorrect. would correspond to a yield (), not .

Can you do all of these?

Tick what you can do without looking. Anything left unticked is where to go back to.

0 of 11 ticked

Ready to test yourself?

Open practice pulls from the 20 free questions in this unit. The other 78 come with the one-time AP purchase, which unlocks every AP course.

Official topic list

The official course framework breaks this unit into 9 numbered topics.

  1. 4.1Introduction for Reactions
  2. 4.2Net Ionic Equations
  3. 4.3Representations of Reactions
  4. 4.4Physical and Chemical Changes
  5. 4.5Stoichiometry
  6. 4.6Introduction to Titration
  7. 4.7Types of Chemical Reactions
  8. 4.8Introduction to Acid-Base Reactions
  9. 4.9Oxidation-Reduction (Redox) Reactions

Key terms in Chemical Reactions

Ordered by how often our reviewed questions test them. Open any term to see the questions that use it.

The rest of AP Chemistry

Every unit with its share of the exam. You are on Unit 4.

  1. 1Atomic Structure and Properties9% of exam
  2. 2Compound Structure and Properties9% of exam
  3. 3Properties of Substances and Mixtures20% of exam
  4. 4Chemical Reactions9% of exam
  5. 5Kinetics9% of exam
  6. 6Thermochemistry9% of exam
  7. 7Equilibrium9% of exam
  8. 8Acids and Bases17% of exam
  9. 9Thermodynamics and Electrochemistry9% of exam