Skip to content
AP course

AP Chemistry

Stoich, equilibrium, thermo — AP Chem without the panic. This guide covers all 9 units at the weights the exam actually gives them, indexes 440 key terms, and shows worked examples with the reasoning written out.

9
Units
440
Key terms
1,477
Reviewed questions
234
Free worked examples

What the exam is

One school year of AP Chemistry covers what most universities spread across two semesters of general chemistry. Nine units, one repeated demand: explain what a bulk sample of matter does — dissolves, boils, conducts current, reacts fast, shifts toward products — using the particles inside it and the forces between them. Recall alone scores badly here. Most items hand you data or a diagram and ask you to explain the cause.

Unit 1, Atomic Structure and Properties, starts with the counting tools: the mole, molar mass, percent composition, the composition of mixtures, and the mass spectra of elements. It then builds the particle picture with electron configurations, photoelectron spectroscopy, Coulombic attraction, and periodic trends. Unit 2, Compound Structure and Properties, sorts substances by bond type — ionic, covalent, metallic — and explains lattice energy in ionic solids with Coulomb's law. It also covers alloys, Lewis structures with resonance and formal charge, VSEPR geometry, hybridization, and bond polarity. Unit 3, Properties of Substances and Mixtures, is the heaviest block on the exam and carries that picture into bulk matter — intermolecular forces, solutions, kinetic molecular theory, the ideal gas law and its deviations, chromatography, and the Beer-Lambert law. Unit 4, Chemical Reactions, covers reactions and stoichiometry: net ionic equations, precipitation, acid-base and redox classification, and an introduction to titration. Units 5 through 7 add time and direction. Kinetics, Unit 5, gives you rate laws, half-life, the collision model, activation energy, reaction energy profiles, catalysis, and multi-step mechanisms. Thermochemistry, Unit 6, gives you calorimetry, Hess's law, and bond enthalpies. Equilibrium, Unit 7, gives you Q against K, ICE tables, Le Châtelier's principle, and solubility products. Unit 8, Acids and Bases, aims equilibrium at acids, bases, buffers, and titration curves. Unit 9, Thermodynamics and Electrochemistry, finishes with entropy, Gibbs free energy, galvanic and electrolytic cells, and electrolysis calculations that run current and time to charge, charge to moles of electrons, and moles of electrons to grams of metal deposited.

The current course framework has exactly two components: the course content, split into nine units, and six science practices — models and representations, question and method, representing data and phenomena, model analysis, mathematical routines, and argumentation. Older prep books file the units under four big ideas instead. That layer was removed in the current revision, the same revision that retitled four of the nine units, and learning objectives are now numbered by unit and topic. The practice list is not decoration. Free-response questions ask you to make a claim and defend it with evidence, and that is a graded skill separate from knowing the chemistry.

Most students take the course in eleventh or twelfth grade, after a first chemistry course, with Algebra II finished or in progress. The math is proportional reasoning, logarithms, and disciplined unit tracking — no calculus. Lab work is not a side activity. College Board expects at least a quarter of class time to be hands-on laboratory work: a minimum of 16 labs, at least 6 of them inquiry-based. The exam collects on that with questions built from real experimental data. Many universities grant one or two semesters of general chemistry credit for a 4 or a 5, which is the practical reason to grind at it.

The format

Three hours and fifteen minutes, split into two sections that count equally toward your score. This is a hybrid digital exam. You answer Section I inside the Bluebook app, and you read Section II on screen but handwrite your answers in a paper booklet that gets shipped off for scoring.

Section I is 60 multiple-choice questions in 90 minutes, worth half the exam. Each has four answer choices, and nothing is subtracted for a wrong guess, so never leave one blank. A calculator is allowed on both Section I and Section II. Bluebook supplies a built-in Desmos scientific and graphing calculator, and you may also bring up to two permitted handheld calculators, scientific or graphing. A four-function calculator is technically permitted, but it has no log, ln, or exponent keys. That makes pH, pOH, and cell-potential work impossible on one, not merely slow. Bring a scientific or graphing calculator, or plan on the Bluebook Desmos. Older prep books still describe a calculator-free multiple-choice section, so ignore that advice and practice with the exact setup you intend to use on test day — your own handheld, the Bluebook Desmos, or both. You also get a periodic table and a sheet of formulas and constants, and you keep both for the whole exam. Ninety seconds per question is the average, but the spread is wide. Many items hand you a particulate diagram, a titration curve, a data table, or a rate graph and ask you to reason qualitatively; those take under a minute. Others bury a two-step calculation. Questions frequently arrive in sets of two or three built on one shared stimulus.

Section II is seven free-response questions in 105 minutes, also worth half. Three long questions are worth 10 points each and four short questions are worth 4 points each, so 46 raw points are on the table. You write every answer by hand in the paper booklet. The long questions usually sit inside an experiment or a multi-part scenario and mix calculation with drawing, graphing, and written justification.

The seven free-response questions are predictable in shape even though the chemistry varies. Expect at least one built on laboratory data, where you interpret measurements, identify a source of error, or design a procedure that would test a stated claim. Expect another that makes you move between representations: a balanced equation, a particulate drawing, and a number, all describing the same event. The four short questions are usually single-idea probes — one buffer calculation, one Lewis structure with a geometry claim, one graph reading.

Readers reward specific causal language and give nothing for vague comparisons. Saying a substance has stronger intermolecular forces earns little. Naming hydrogen bonding between water molecules and comparing it against the dipole-dipole attraction in hydrogen sulfide earns the point. Read the command verb. Justify means give evidence and connect it to a claim. Explain in terms of particle-level forces means name the force, compare its strength, and state the consequence. Numbers need units and defensible significant figures, and the sign on a value such as ΔG is part of the answer.

The two sections combine into a composite that is mapped onto the 1 to 5 scale. Cut scores move each year, but the mapping is far kinder than a classroom grading scale, and partial credit in Section II is real. Write the setup even when the arithmetic beats you.

How to study for it

Start with a timed diagnostic instead of a textbook. Sit 60 multiple-choice questions in 90 minutes, then score them twice: once for right and wrong, once for confidence. Anything you got right by guessing counts as a gap. Sort the gaps by unit and weigh them against exam share. Units 3 and 8 are the two heaviest units on the exam. College Board weights Unit 3 at 18 to 22% of the multiple-choice section and Unit 8 at 11 to 15%. Together they are about a third of your score. They supply only about a quarter of the items in our bank, 377 of 1,477. Thermochemistry, by comparison, is 7 to 9%. So an hour on intermolecular forces or buffer chemistry buys more than an hour on calorimetry.

Memorize only what the exam refuses to give you. The formula sheet and periodic table are handed to you, so drill the judgment instead of the letters: which equation the situation calls for, and how to rearrange it once you have it. What is never handed to you: the strong acids and strong bases, the common polyatomic ions and their charges, solubility rules, oxidation-number rules, and the strength ranking of intermolecular forces. Build one card per list and review them daily until they are automatic.

Practice explaining before you practice calculating. For every problem you work, write one sentence naming the particles involved and the force or driver responsible. Ethanol boils higher than propane because ethanol's O-H group hydrogen bonds. That sentence is the free-response point. Students who can compute but cannot narrate lose most of their marks in Section II, not Section I.

Build estimation habits even though a calculator is allowed. Section I averages 90 seconds a question, and reaching for the calculator on every item burns the clock you need for the reasoning questions. Round to one significant figure, track powers of ten, and estimate logarithms. A hydronium concentration of 2 x 10⁻⁵ molar gives a pH a little under 5, and that is enough precision to pick an answer. Reserve the calculator for the multi-step arithmetic that actually needs it.

Train yourself to move between the three levels of description. Every idea in this course exists as something you can observe, as particles you can draw, and as a symbol or equation you can manipulate. A solution conducting electricity is the observation; dissociated ions moving through water is the particle picture; the dissolution equation, NaCl(s) → Na⁺(aq) + Cl⁻(aq), is the symbol. A net ionic equation is simply what is left once the spectator ions are struck out, so that dissolution equation is one. So is a metal dropped into acid: Mg(s) + 2 H⁺(aq) → Mg²⁺(aq) + H₂(g). Exam questions constantly hand you one level and demand another. Practice by taking any problem and sketching the particulate view even when nobody asked for it.

Grade your own free response against published scoring guidelines. Write a full answer, then score it point by point and mark exactly which sentence earned each point. Do that six or seven times and you start writing in point-sized units.

Keep an error log with three columns: the question, the true cause, and the fix. Careless is not a cause. Real causes read like used molarity where the problem needed moles, or assumed x was negligible when K was large. Rework every logged question a week later, cold.

A timeline that works

Eight weeks out. Sweep the content by exam weight rather than chapter order. Two units a week, and three in the first week, starting with Unit 3 and Unit 8 because they carry the most weight. For each unit, read a guide, work 20 to 30 bank questions untimed, then log every error. Do not chase perfection; aim to have touched all nine units once by the halfway mark. Start the memorization cards now, since spaced repetition needs weeks to work, not days.

Four weeks out. Shift from learning to performing. One full timed Section I every week, plus two free-response sets that you score yourself against official rubrics. Rebuild your two weakest units from scratch instead of skimming them again. This is also the point to attack lab-based questions: separation techniques, titration data, calorimetry, and spectrophotometry. Experimental design appears on essentially every exam.

One week out. Take one full mock exam under real conditions — both sections, one sitting, the calculator you will actually bring plus the Bluebook Desmos, the official reference tables. Handwrite the free response on paper, because that is how you will actually submit it. Then spend the remaining days inside your error log and your memorized lists rather than on new topics. Rework every question you have missed all season. If a unit still feels unstable, target its three highest-frequency ideas instead of the whole unit.

The night before. No new chemistry. Twenty or thirty minutes skimming the error log and the cards, then stop. Pack the device you will test on, fully charged, with Bluebook installed and updated, plus its charger. Pack your approved handheld calculator with fresh batteries if you plan to use one. Pack several sharpened pencils and dark blue or black pens, because Section II is still handwritten in a paper booklet. Confirm your start time and how you are getting there. Then sleep a full night, because recall of rules and reaction types degrades faster from lost sleep than from one skipped review session.

The units

In teaching order. Heaviest is Properties of Substances and Mixtures at 20% of the exam — if you are short on time, that is where the points are.

How to work through it

1

Read the unit guide

Each unit page shows what the exam asks for, the terms it draws on, and worked examples from easier to harder.

2

Drill the terms you blanked on

Every key term has its own page with the questions that test it — 440 of them.

3

Practice under pressure

Open practice runs on the free set. One purchase unlocks the full 1,477-question bank and progress tracking.

Common questions

What is on the AP Chemistry exam?

AP Chemistry is organized into 9 units. The heaviest is Properties of Substances and Mixtures at about 20% of the exam. The multiple-choice section runs 60 questions in 90 minutes. Each unit page in this library lists the concepts that unit draws on and shows worked examples.

Which AP Chemistry unit should I study first?

If you are revising with limited time, start with Properties of Substances and Mixtures — it carries roughly 20% of the exam, more than any other unit. The unit list on this page shows every unit's share, so you can work down from the heaviest.

Is this AP Chemistry material free?

The study guides, the 440-concept index, and 234 worked examples are free with no account. The full 1,477-question bank, adaptive practice, and progress tracking are part of the one-time AP purchase, which covers every AP course.

Where do these questions come from?

They are written in-house and then put through a review pipeline before they can appear here: the answer key is re-solved in a separate review pass, the explanation is checked for leaked reasoning, sourcing and attribution are verified, and any copyrighted or unverifiable quoted text is removed. Only items that pass every gate are published — 1,477 for AP Chemistry.

How many practice questions do I get for AP Chemistry?

234 are open to everyone with no account, spread so that every unit and every indexed concept has at least one worked example. The remaining 1,243 come with the AP purchase.