8 topics. Each one opens with its key idea, then the detail you need to use it.
1. What a limit means, and reading it from graphs and tables
Key idea: Read the height the curve approaches from both sides, and ignore what happens exactly at $x = a$.
Write $\lim_{x \to a} f(x) = L$ when the outputs of $f$ get as close to $L$ as you like whenever $x$ is close enough to $a$ (but not equal to $a$). The "not equal" part matters. The limit is about the trend, not about the single point.
On a graph, trace the curve toward $x = a$ from the left with one finger and from the right with another. If both fingers arrive at the same height, that height is the limit. Ignore any open circle or any filled dot that sits off the curve. A filled dot at $(2, 5)$ tells you $f(2) = 5$, but the limit is still wherever the curve is heading.
Tables work the same way. Look at $x$-values such as 1.9, 1.99, 1.999 and 2.1, 2.01, 2.001. If the outputs settle toward 3 from both directions, the limit is 3. If the left column settles at 3 and the right column at 4, the limit does not exist. A table can only suggest a limit, because it shows a handful of points. If an answer choice relies on the value in the row $x = 2$ itself, that choice is a trap.
One more check is easy to forget. The limit is a $y$-value. If $x \to 3$, the number 3 is where you are going on the $x$-axis, and it is usually not the answer.
2. Evaluating limits algebraically
Key idea: Substitute first; if you get 0/0, factor, rationalize, or rewrite toward sin(u)/u, then substitute again.
Start with direct substitution. Polynomials, rational functions (where the denominator is not zero), roots, exponentials, logs, and trig functions are continuous on their domains, so at points inside their domains the limit equals the value. For $\lim_{x \to 3}(2x^2 - 5x + 1)$, compute $2(9) - 15 + 1 = 4$. Square before you multiply, watch the sign on $-5x$, and keep the constant.
If substitution into a rational function gives $\frac{0}{0}$, the numerator and denominator polynomials both equal zero at $a$, so they share a factor of $(x - a)$. Factor and cancel it. For $\frac{x^2 - 9}{x - 3}$, the numerator is $(x - 3)(x + 3)$, so the expression equals $x + 3$ everywhere except $x = 3$. Since the limit ignores $x = 3$ itself, the limit is $3 + 3 = 6$. The same move handles $\frac{x^2 + 5x + 6}{x^2 - x - 6}$ at $x = -2$. Both factor with $(x + 2)$, leaving $\frac{x + 3}{x - 3}$, which gives $-\frac{1}{5}$.
Other $\frac{0}{0}$ forms have no polynomial factor to cancel, so you rewrite them instead. For square roots, multiply top and bottom by the conjugate. For $\frac{\sqrt{x+4} - 2}{x}$ as $x \to 0$, the conjugate turns the top into $x$, which cancels and leaves $\frac{1}{\sqrt{x+4} + 2} \to \frac{1}{4}$. For a complex fraction such as $\frac{\frac{1}{x} - \frac{1}{2}}{x - 2}$, combine the top over a common denominator first.
For trig, use $\lim_{u \to 0} \frac{\sin u}{u} = 1$ and $\lim_{u \to 0} \frac{1 - \cos u}{u} = 0$. To use the first one, match the inside of the sine with the denominator: $\frac{\sin 3x}{x} = 3 \cdot \frac{\sin 3x}{3x} \to 3$.
3. One-sided limits and piecewise functions
Key idea: Compute each side with the piece that actually applies there; the two-sided limit exists only if they match.
$\lim_{x \to a^-} f(x)$ uses only $x$-values less than $a$. $\lim_{x \to a^+} f(x)$ uses only values greater than $a$. The two-sided limit exists exactly when both one-sided limits exist and are equal.
Piecewise functions are where this gets tested most. Take $f(x) = x + 1$ for $x < 2$, $f(2) = 5$, and $f(x) = 3x - 2$ for $x > 2$. Approaching from the left, you use $x + 1$ and get 3. Approaching from the right, you use $3x - 2$ and get 4. They disagree, so $\lim_{x \to 2} f(x)$ does not exist. The value $f(2) = 5$ plays no part in this. Students who compute only one side pick 3 or 4, which are both offered as wrong choices.
To find a constant that makes a piecewise function continuous, set the left and right expressions equal at the boundary. For $x^2 + 1$ when $x < 2$ and $kx - 1$ when $x \geq 2$, the left side approaches $4 + 1 = 5$. The right piece gives $2k - 1$, so solve $2k - 1 = 5$ to get $k = 3$. Plug $k$ back in to check, because a slip here costs the whole question.
Absolute value creates hidden pieces. $\frac{|x - 1|}{x - 1}$ equals $-1$ to the left of 1 and $+1$ to the right, so its limit at 1 does not exist. Rewrite any absolute value as a piecewise function before you take a limit.
4. Infinite limits and vertical asymptotes
Key idea: Nonzero over zero means an asymptote; check the sign on each side, and cancel common factors first to spot holes.
If substitution gives a nonzero number over zero, such as $\frac{5}{0}$, the function grows without bound near $a$. The line $x = a$ is then a vertical asymptote. Writing $\lim f(x) = \infty$ describes how the function behaves, but technically the limit does not exist as a real number.
To get the sign right, test each side. For $\frac{1}{x - 3}$ as $x \to 3^+$, the denominator is a tiny positive number, so the fraction goes to $+\infty$. As $x \to 3^-$, the denominator is tiny and negative, so it goes to $-\infty$. Because the two sides differ, you cannot write a single two-sided answer. Compare $\frac{1}{(x - 3)^2}$. The squared denominator is positive on both sides, so both sides go to $+\infty$.
Factoring is what separates asymptotes from holes. For $f(x) = \frac{x^2 - 9}{x^2 - x - 6} = \frac{(x - 3)(x + 3)}{(x - 3)(x + 2)}$, the factor $(x - 3)$ cancels. So $x = 3$ is a hole, and its height is the simplified function there, $\frac{6}{5}$. The factor $(x + 2)$ stays in the denominator, so $x = -2$ is a vertical asymptote. A zero of the original denominator is only a candidate. You must factor and cancel before you call it an asymptote.
Other functions produce asymptotes too. $\ln x$ has one at $x = 0$, with $\lim_{x \to 0^+} \ln x = -\infty$. $\tan x$ has them at odd multiples of $\frac{\pi}{2}$.
5. Limits at infinity and horizontal asymptotes
Key idea: At infinity, compare the highest powers (or growth rates); constants and lower terms stop mattering.
$\lim_{x \to \infty} f(x)$ asks what height the function settles toward as $x$ grows without bound. If it settles to $L$, the line $y = L$ is a horizontal asymptote.
For rational functions, the highest powers decide everything, because they swamp the smaller terms when $x$ is huge. Divide every term by the highest power of $x$ in the denominator. In $\frac{4x^2 - 3}{2x^2 + 7}$, dividing by $x^2$ gives $\frac{4 - 3/x^2}{2 + 7/x^2}$, and every fraction with $x$ downstairs goes to 0. That leaves $\frac{4}{2} = 2$. This gives you three rules. If the degrees are equal, the limit is the ratio of the leading coefficients. If the bottom has the higher degree, the limit is 0. If the top has the higher degree, the function grows without bound, with a sign set by the leading terms. Use leading coefficients, never the constant terms. For $\frac{3x^2 + 1}{5x^2 - 2}$, the answer is $\frac{3}{5}$, not $\frac{1}{-2}$.
Watch square roots as $x \to -\infty$. Since $\sqrt{x^2} = |x|$, $\frac{\sqrt{9x^2 + 1}}{x}$ goes to 3 as $x \to \infty$ but to $-3$ as $x \to -\infty$. A function can have two different horizontal asymptotes.
Know the growth order: logs grow slower than any power of $x$, and powers grow slower than $e^x$. So $\lim_{x \to \infty} \frac{x^3}{e^x} = 0$ and $\lim_{x \to \infty} e^{-x} = 0$. Oscillating terms such as $\frac{\sin x}{x}$ go to 0 as $x \to \infty$, which is a Squeeze Theorem result.
6. The Squeeze Theorem
Key idea: Trap the function between two simpler functions with the same limit; the bounds must agree at that exact point.
Some limits cannot be simplified by algebra because a factor oscillates. The Squeeze Theorem handles them. If $g(x) \leq f(x) \leq h(x)$ near $a$, and $g$ and $h$ have the same limit $L$ at $a$, then $f$ also has limit $L$. The function in the middle is trapped, so it has nowhere else to go.
The classic case is $\lim_{x \to 0} x^2 \sin\left(\frac{1}{x}\right)$. As $x \to 0$, $\sin\left(\frac{1}{x}\right)$ swings between $-1$ and 1 forever and has no limit. You cannot use the product rule for limits, because that rule needs both limits to exist. Instead, start from $-1 \leq \sin\left(\frac{1}{x}\right) \leq 1$ and multiply by $x^2$, which is never negative, so the inequalities keep their direction. You get $-x^2 \leq x^2 \sin\left(\frac{1}{x}\right) \leq x^2$. Both outer functions go to 0, so the middle one does too.
The same idea gives $\lim_{x \to \infty} \frac{\cos x}{x} = 0$, because the function stays between $-\frac{1}{x}$ and $\frac{1}{x}$. It is also how textbooks prove that $\frac{\sin x}{x} \to 1$ as $x \to 0$.
Exam items often state the bounds for you, for example "$3 - x^2 \leq f(x) \leq 3 + x^2$ for all $x$." Then they ask for $\lim_{x \to 0} f(x)$. Check that both bounds approach the same number at the given $x$-value. If the bounds approach different numbers, the theorem tells you nothing.
7. Continuity and classifying discontinuities
Key idea: Check defined, limit exists, and equal; a removable discontinuity has a limit, while jump and infinite ones do not.
$f$ is continuous at $x = a$ when three things hold. First, $f(a)$ is defined. Second, $\lim_{x \to a} f(x)$ exists. Third, $\lim_{x \to a} f(x) = f(a)$. On an FRQ, show all three with actual numbers. Writing "the graph has no breaks" earns nothing.
The common types have names. A removable discontinuity happens when the limit exists but $f(a)$ is missing or wrong, like a hole or a lone dot off the curve. You can fix it by defining or redefining one point. For $\frac{x^2 - 9}{x - 3}$, setting $f(3) = 6$ makes the function continuous. A jump discontinuity happens when the one-sided limits are finite but unequal, so no single value can fix it. An infinite discontinuity happens at a vertical asymptote. Jump and infinite discontinuities are both nonremovable.
Continuity on an interval means continuity at every point inside it. On a closed interval $[a, b]$, you also need one-sided continuity at the endpoints: $\lim_{x \to a^+} f(x) = f(a)$ and $\lim_{x \to b^-} f(x) = f(b)$. The standard functions are continuous wherever they are defined. So $\frac{1}{x}$ is continuous on its domain even though it has an asymptote at 0, which is outside the domain.
One link to the next unit belongs here. Differentiability implies continuity, but continuity does not imply differentiability. $|x|$ is continuous at 0 and has a corner there, so it has no derivative at 0. If a function is not continuous at a point, it cannot be differentiable there.
8. The Intermediate Value Theorem
Key idea: IVT needs continuity on a closed interval, and it proves a value exists without telling you where.
The IVT says: if $f$ is continuous on the closed interval $[a, b]$ and $k$ is any number between $f(a)$ and $f(b)$, then there is at least one $c$ in $(a, b)$ with $f(c) = k$. A continuous function cannot get from one height to another without passing through every height in between.
The most common use is finding a root. If $f$ is continuous on $[1, 5]$, $f(1) = -2$ and $f(5) = 6$, then 0 lies between $-2$ and 6. So some $c$ in $(1, 5)$ has $f(c) = 0$. The theorem guarantees that $c$ exists, but it does not say where it is or how many there are. Answer choices that say "$f(3) = 0$" or "exactly one zero" claim too much.
The continuity condition is not decoration. $f(x) = \frac{1}{x}$ has $f(-1) = -1$ and $f(1) = 1$ but never equals 0. The IVT does not apply because $f$ is not continuous on $[-1, 1]$ (it is undefined at 0), so it guarantees nothing. When a question gives a table of values for a function, the IVT applies only if the stem tells you $f$ is continuous (or differentiable, which implies continuous).
On FRQs, a full justification names the theorem, states that $f$ is continuous on the closed interval, and shows the target value lies between the endpoint values with numbers. For example: "$f$ is continuous on $[2, 6]$ and $f(2) = 4 < 7 < 9 = f(6)$, so by the IVT there is a $c$ in $(2, 6)$ with $f(c) = 7$." With table data, you can also count sign changes to get a minimum number of zeros.