Skip to content

Unit 6 of 10

The Integral

16% of the exam515 reviewed questions13 key terms15 min read

The Integral is worth about 16% of the AP Calculus BC exam. Our bank tests it with 515 reviewed questions across 13 distinct ideas — 51 easier, 267 medium and 197 harder.

On this page · 12 sections

A derivative turns an amount into a rate. An integral runs that process backward: it takes a rate and adds it up into an amount. If water flows into a tank at $r(t)$ gallons per minute, then $\int_0^{10} r(t)\,dt$ is the number of gallons that came in over ten minutes. Every question in this unit is some version of that sentence. You estimate the total with rectangles and trapezoids, you compute it exactly with an antiderivative, or you treat it as a function of its upper limit and differentiate it.

The Fundamental Theorem of Calculus ties the pieces together, and it has two halves that go in opposite directions. The Fundamental Theorem (Part 1) says that if you build $g(x)=\int_a^x f(t)\,dt$, then $g'(x)=f(x)$, so differentiating an accumulation gives back the rate. The Fundamental Theorem (Part 2) says $\int_a^b f(x)\,dx = F(b)-F(a)$ for any antiderivative $F$, so an area problem becomes an antiderivative problem. Riemann sums explain what the definite integral means. The two theorems explain how to get its value.

The rest of the unit is technique. You need the basic antiderivatives cold, plus $u$-substitution, long division and completing the square. As a BC student you also need integration by parts, partial fractions and improper integrals. Most wrong answers here are not hard calculus mistakes. They are dropped $+C$ terms, forgotten lower limits, bounds left in $x$ after a substitution, and displacement reported when the question asked for total distance.

The unit in a minute

One line per topic. Tap any line for the full notes.

  1. Riemann sums, the trapezoidal rule and the limit definitionFind each piece's width and sample point before you add anything, and judge the error from monotonicity (left and right) or concavity (trapezoid and midpoint).
  2. The definite integral and its propertiesSwap limits and the sign flips, adjacent intervals add, and a constant term $c$ contributes $c$ times the width of the interval.
  3. The Fundamental Theorem (Part 1): accumulation functionsFor $g(x)=\int_a^x f(t)\,dt$, the graph of $f$ is the graph of $g'$, so heights of $f$ are slopes of $g$ and areas under $f$ are values of $g$.
  4. The Fundamental Theorem (Part 2): evaluating the definite integralEvaluate the antiderivative at both limits and subtract, and check that the integrand is continuous on the whole interval first.
  5. Accumulation & net change: displacement versus total distanceDisplacement is $\int v\,dt$, total distance is $\int |v|\,dt$, and they differ whenever the velocity changes sign.
  6. Antiderivatives and initial value problemsIntegrate, add $+C$, then use the given point to solve for $C$, and differentiate your answer to check it.
  7. u-Substitution (indefinite and definite)Every piece must change together: the integrand, the differential and, for a definite integral, both limits.
  8. Selecting an antidifferentiation techniqueTry a basic form first, then substitution, then the algebra (division or completing the square), then parts or partial fractions.
Grind The Integral questionsAlready know this? Skip the notes and prove it.

The big ideas

An integral of a rate is a change in amount

If $f'$ is the rate at which $f$ changes, then $\int_a^b f'(t)\,dt = f(b)-f(a)$. This is the idea behind accumulation & net change, and it is the most useful equation in the unit. It gives you the amount at time $b$ as $f(b)=f(a)+\int_a^b f'(t)\,dt$: start with what you had and add what changed. Units confirm the setup. Gallons per minute times minutes gives gallons, so the integral of a rate in gallons per minute has units of gallons.

The definite integral is a limit of sums

The definite integral $\int_a^b f(x)\,dx$ is the limit of Riemann sums as the rectangles get thinner. Every finite sum is an estimate, and its error depends on the shape of the graph. Left and right sums are judged by whether $f$ is increasing or decreasing. Trapezoidal and midpoint sums are judged by concavity. The exam also runs this idea backward, handing you $\lim_{n\to\infty}\sum$ and asking which integral it equals.

Signed area, not plain area

A definite integral counts area above the $x$-axis as positive and area below it as negative. For velocity, that means $\int v\,dt$ is displacement, where forward and backward trips cancel. To get total distance or total area, you integrate the absolute value. That forces you to find where the function changes sign and split the interval there.

Two theorems that undo each other

Part 1 of the Fundamental Theorem says that differentiating an integral with a variable upper limit returns the integrand. Part 2 says that integrating a derivative returns the net change in the original function. Together they show that differentiation and integration are inverse processes. That is why every antiderivative rule is just a derivative rule read backward, and why you can check any antiderivative by differentiating it.

Study notes

8 topics. Each one opens with its key idea, then the detail you need to use it.

1. Riemann sums, the trapezoidal rule and the limit definition

Key idea: Find each piece's width and sample point before you add anything, and judge the error from monotonicity (left and right) or concavity (trapezoid and midpoint).

To estimate $\int_a^b f(x)\,dx$, split $[a,b]$ into pieces and build a rectangle on each one. The width of each rectangle is the length of its piece. The only choice is where you measure the height. A left sum uses the left endpoint, a right sum uses the right endpoint, and a midpoint sum uses the center. With $n$ rectangles you use $n$ heights, and the trapezoidal rule is the one method that uses all $n+1$ boundary values.

Exam tables often have unequal widths, so compute each piece separately. Suppose a rate $r(t)$ is $10, 14, 16, 12$ at $t=0, 2, 5, 9$. The widths are $2, 3, 4$. The left sum is $2(10)+3(14)+4(16)=126$, and the right sum is $2(14)+3(16)+4(12)=124$. The trapezoidal rule averages the two heights on each piece: $2\cdot\frac{10+14}{2}+3\cdot\frac{14+16}{2}+4\cdot\frac{16+12}{2}=125$.

The direction of the error follows from the graph. If $f$ is increasing, left sums underestimate and right sums overestimate, and the reverse holds when $f$ is decreasing. If $f$ is concave up, the straight tops of the trapezoids sit above the curve, so the trapezoidal sum overestimates. If $f$ is concave down, it underestimates. The midpoint sum goes the other way: it underestimates when $f$ is concave up and overestimates when $f$ is concave down.

The exact integral is the limit as the pieces shrink. You may need to read this backward. In $\lim_{n\to\infty}\sum_{k=1}^{n}\frac{2}{n}\left(1+\frac{2k}{n}\right)^3$, the width is $\frac{2}{n}$ and the sample point $1+\frac{2k}{n}$ runs from 1 to 3. So the limit equals $\int_1^3 x^3\,dx = 20$.

2. The definite integral and its properties

Key idea: Swap limits and the sign flips, adjacent intervals add, and a constant term $c$ contributes $c$ times the width of the interval.

The definite integral is a number, the signed area between $f$ and the $x$-axis from $a$ to $b$. When the graph is made of lines and circles, you can compute it with geometry and no antiderivative. For example, $\int_{-2}^{2}\sqrt{4-x^2}\,dx$ is the area of a semicircle of radius 2, which is $2\pi$. Region areas below the axis enter with a minus sign.

The properties of definite integrals let you build new integrals from given ones: - $\int_a^a f(x)\,dx = 0$, since there is no width. - $\int_b^a f(x)\,dx = -\int_a^b f(x)\,dx$, so swapping the limits flips the sign. - $\int_a^b f(x)\,dx + \int_b^c f(x)\,dx = \int_a^c f(x)\,dx$, so adjacent intervals add. - $\int_a^b [k f(x) + g(x)]\,dx = k\int_a^b f(x)\,dx + \int_a^b g(x)\,dx$, so constants and sums split apart.

Here is how they combine. Suppose $\int_0^5 f(x)\,dx = 8$ and $\int_3^5 f(x)\,dx = 3$. Then $\int_0^3 f(x)\,dx = 5$ by additivity. Next, $\int_0^3 [2f(x)+1]\,dx = 2(5)+3 = 13$, because the integral of the constant 1 over a width of 3 is 3. Finally, $\int_3^0 [2f(x)+1]\,dx = -13$. One trap: there is no product rule. $\int f(x)g(x)\,dx$ is not $\int f(x)\,dx \cdot \int g(x)\,dx$.

3. The Fundamental Theorem (Part 1): accumulation functions

Key idea: For $g(x)=\int_a^x f(t)\,dt$, the graph of $f$ is the graph of $g'$, so heights of $f$ are slopes of $g$ and areas under $f$ are values of $g$.

An accumulation function has the form $g(x)=\int_a^x f(t)\,dt$. Its input is the upper limit, and its output is the signed area built up from $a$ to $x$. Part 1 of the Fundamental Theorem says $g'(x)=f(x)$. The reason is simple. Push $x$ forward a tiny bit and the area grows by a thin strip about $f(x)$ tall, so the rate of growth is $f(x)$. You never need an antiderivative for this. For example, $\frac{d}{dx}\int_2^x \ln(t^2+3)\,dt = \ln(x^2+3)$.

The lower limit $a$ does not appear in the answer. Changing $a$ only adds a constant to $g$, and constants differentiate to zero. Three variations show up often: - If the upper limit is a function $u(x)$, use the chain rule: $\frac{d}{dx}\int_1^{x^2}\cos t\,dt = \cos(x^2)\cdot 2x$. - If $x$ is in the lower limit, flip the limits and negate: $\frac{d}{dx}\int_x^5 f(t)\,dt = -f(x)$. - If you are given only the graph of $f$, read $g$ from it. $g(a)=0$. $g$ increases where $f>0$ and has a relative maximum where $f$ changes from positive to negative. $g$ is concave up where $f$ is increasing.

That last case is a free-response favorite. You find values of $g$ by adding signed areas on the graph of $f$. You find slopes of $g$ by reading heights of $f$. You find concavity of $g$ by reading the slope of $f$.

4. The Fundamental Theorem (Part 2): evaluating the definite integral

Key idea: Evaluate the antiderivative at both limits and subtract, and check that the integrand is continuous on the whole interval first.

Part 2 of the Fundamental Theorem turns area into algebra: $\int_a^b f(x)\,dx = F(b)-F(a)$, where $F$ is any antiderivative of $f$. The $+C$ cancels in the subtraction, so you can drop it here. For example, $\int_1^3 (x^2+1)\,dx = \left[\frac{x^3}{3}+x\right]_1^3 = (9+3)-\left(\frac13+1\right) = \frac{32}{3}$.

The subtraction is where points disappear. Students evaluate at the top limit and stop, or they assume the bottom value is zero. At $x=0$, $e^x$ equals 1 and $\cos x$ equals 1, so neither term vanishes. Always write both values in brackets before you subtract.

The theorem also needs $f$ to be continuous on $[a,b]$. If $f$ blows up inside the interval, as $\frac{1}{x^2}$ does at $x=0$ on $[-1,1]$, then plugging in the endpoints gives a wrong answer of $-2$. That integral is improper, and when you work it out with limits it diverges, so there is no finite value to replace the $-2$.

On the calculator section, you often cannot find an antiderivative at all. You then use the theorem in its net-change form and let the calculator compute the integral numerically. If $f(2)=7$ and $f'(x)=\sin(x^2)$, then $f(4)=7+\int_2^4 \sin(x^2)\,dx$. No elementary antiderivative exists, but the calculator gives the number directly.

5. Accumulation & net change: displacement versus total distance

Key idea: Displacement is $\int v\,dt$, total distance is $\int |v|\,dt$, and they differ whenever the velocity changes sign.

Accumulation & net change problems give you a rate and ask for an amount. The template is always: amount at the end equals amount at the start plus the integral of the rate. If a tank holds 50 gallons at $t=0$ and water flows in at $r(t)$ gallons per minute, it holds $50+\int_0^4 r(t)\,dt$ gallons at $t=4$. When water also leaves at $d(t)$, integrate the net rate, $r(t)-d(t)$.

Motion problems add one twist. The integral $\int_a^b v(t)\,dt$ is displacement, the change in position, and backward motion cancels forward motion. Total distance is $\int_a^b |v(t)|\,dt$. To compute it, find where $v$ changes sign, split the interval there, and add the absolute value of each leg.

Take $v(t)=4-2t$ on $[0,5]$. It changes sign at $t=2$. The first leg is $\int_0^2 (4-2t)\,dt = 4$, so the particle moves 4 units forward. The second leg is $\int_2^5 (4-2t)\,dt = -9$, so it moves 9 units back. The displacement is $4-9=-5$, but the total distance is $4+9=13$.

Check the question's wording before you answer. "Position at time 5" means initial position plus displacement. "Total distance traveled" means the sum of the legs. "How far from its starting point" means the absolute value of the displacement. Each is a different number, and the wrong ones always appear among the choices.

6. Antiderivatives and initial value problems

Key idea: Integrate, add $+C$, then use the given point to solve for $C$, and differentiate your answer to check it.

Antiderivatives are derivative rules read backward, so you can check every answer by differentiating it. The core list: - $\int x^n\,dx = \frac{x^{n+1}}{n+1}+C$ for $n\neq -1$, and $\int \frac{1}{x}\,dx = \ln|x|+C$. - $\int e^x\,dx = e^x+C$, and $\int \sin x\,dx = -\cos x+C$, while $\int \cos x\,dx = \sin x+C$. - $\int \sec^2 x\,dx = \tan x+C$. - $\int \frac{1}{1+x^2}\,dx = \arctan x+C$, and $\int \frac{1}{\sqrt{1-x^2}}\,dx = \arcsin x+C$.

The $+C$ is there because any constant differentiates to zero, so an indefinite integral is a whole family of functions. Rewrite before you integrate. Roots become powers, and a fraction with one term on the bottom splits apart. For example, $\int \frac{x^2+1}{\sqrt{x}}\,dx = \int (x^{3/2}+x^{-1/2})\,dx = \frac25 x^{5/2}+2x^{1/2}+C$.

Initial value problems pick one member of that family. Suppose $f'(x)=6x^2-4$ and $f(1)=5$. Integrating gives $f(x)=2x^3-4x+C$. Substituting $x=1$ gives $2-4+C=5$, so $C=7$ and $f(x)=2x^3-4x+7$. You can also skip $C$ by using net change: $f(x)=5+\int_1^x (6t^2-4)\,dt$. This second form is the one to use when $f'$ has no simple antiderivative.

7. u-Substitution (indefinite and definite)

Key idea: Every piece must change together: the integrand, the differential and, for a definite integral, both limits.

Substitution reverses the chain rule. Look for a function inside another function whose derivative also appears, up to a constant. In $\int x\cos(x^2)\,dx$, the inside is $x^2$ and its derivative $2x$ is present apart from the 2. Let $u=x^2$, so $du=2x\,dx$ and $x\,dx=\frac12\,du$. The integral becomes $\frac12\int\cos u\,du=\frac12\sin(x^2)+C$. For u-substitution (indefinite), always finish by writing the answer back in terms of $x$.

Linear insides come up so often that you should do them on sight. You divide by the inner coefficient: $\int e^{3x}\,dx = \frac13 e^{3x}+C$ and $\int (2x+1)^4\,dx = \frac{(2x+1)^5}{10}+C$.

For u-substitution (definite), change the limits along with the variable. Take $\int_1^2 \frac{x}{x^2+1}\,dx$ and let $u=x^2+1$. When $x=1$, $u=2$, and when $x=2$, $u=5$. The integral becomes $\frac12\int_2^5 \frac{1}{u}\,du = \frac12\ln\frac52$. You never go back to $x$ because the new limits already belong to $u$.

Three errors account for most wrong choices. Some students keep the $x$-limits on a $u$-integral. Some miss the constant, either dropping the $\frac12$ or counting the factor twice after $du$ has already absorbed it. Others forget that $e^0=1$ when they evaluate.

8. Selecting an antidifferentiation technique

Key idea: Try a basic form first, then substitution, then the algebra (division or completing the square), then parts or partial fractions.

Selecting an antidifferentiation technique is a decision you make in order. First, check whether the integral is a basic form or becomes one after rewriting. Second, look for an inside function whose derivative is present, which signals substitution. If neither works, reach for the techniques below.

Integration: long division & completing the square handles rational functions. When the top has degree at least as large as the bottom, divide first. Since $x^2+1=(x+1)(x-1)+2$, you get $\int\frac{x^2+1}{x+1}\,dx=\int\left(x-1+\frac{2}{x+1}\right)dx=\frac{x^2}{2}-x+2\ln|x+1|+C$. When an irreducible quadratic sits on the bottom, complete the square to reach the arctangent form: $\int\frac{dx}{x^2+4x+5}=\int\frac{dx}{(x+2)^2+1}=\arctan(x+2)+C$.

The BC course adds three more tools. - Integration by parts, $\int u\,dv = uv-\int v\,du$, fits a product such as $\int x e^x\,dx = xe^x-e^x+C$. Choose $u$ as the factor that gets simpler when you differentiate it. - Partial fractions split a bottom made of distinct linear factors: $\frac{1}{x^2-1}=\frac{1/2}{x-1}-\frac{1/2}{x+1}$, which integrates to two logarithms. - Improper integrals replace an infinite limit or a blow-up point with a limit. $\int_1^\infty \frac{1}{x^2}\,dx = \lim_{b\to\infty}\left(1-\frac1b\right)=1$ converges, but $\int_1^\infty \frac1x\,dx$ diverges because $\ln b$ grows without bound.

Common mistakes

Drawn from the wrong answers students actually pick on these questions.

Differentiating when the question asks you to integrate, or giving an indefinite integral with no $+C$. For $\int(3x^2+2x)\,dx$, students write $6x+2+C$, or they write $x^3+x^2$ and stop.

Integration raises the power: $\int(3x^2+2x)\,dx = x^3+x^2+C$. Differentiate your answer to confirm you get the integrand back. Every indefinite integral needs $+C$, because a whole family of functions shares the same derivative.

Overworking Part 1 of the Fundamental Theorem. For $\frac{d}{dx}\int_1^x\sqrt{t^3+1}\,dt$, students differentiate the integrand to get $\frac{3x^2}{2\sqrt{x^3+1}}$, or they subtract a lower-limit value such as $\sqrt{2}$.

When the upper limit is plain $x$, the derivative is the integrand with $t$ replaced by $x$, here $\sqrt{x^3+1}$. The lower limit only shifts the function by a constant, so it drops out. Use the chain rule only when the upper limit is a function of $x$ other than $x$ itself.

Mishandling a definite substitution. For $\int_0^1 2x e^{x^2}\,dx$, students get $e^2-1$ by misjudging the new upper limit, $2e-2$ by keeping the factor 2 after $du$ absorbed it, or $e$ by never subtracting the lower value.

With $u=x^2$, the limits become $0^2=0$ and $1^2=1$, and $du=2x\,dx$ uses up the 2. That leaves $\int_0^1 e^u\,du = e^1-e^0 = e-1$. Remember that $e^0=1$, not 0.

Choosing the wrong sample points for a Riemann sum. For a left sum on $[0,4]$ with 4 pieces, students use the right endpoints $1,2,3,4$, the midpoints $0.5,1.5,2.5,3.5$, or all five boundaries $0,1,2,3,4$.

Write out the pieces first: $[0,1],[1,2],[2,3],[3,4]$. A left sum takes the left end of each piece, which gives $0,1,2,3$. Four pieces always means four heights. A left sum drops the last boundary point and a right sum drops the first. Only the trapezoidal rule uses all five boundary values.

Answering with displacement or a single leg when the question asks for total distance. Typical wrong answers are 0 when the trips cancel, the final position, or the length of just the first leg.

Set $v(t)=0$ and list every time in the interval where $v$ changes sign. Find the position change on each leg, take absolute values and add all of them. Before you submit, count your legs: two sign changes means three legs.

How this unit shows up on the exam

This unit carries about 17–20% of the BC exam score by the College Board's weighting, the largest share of any unit alongside Infinite Sequences and Series (17–18%). It is tested in both multiple-choice sections and in free response. It also carries into Units 7 and 8, since volumes, areas and differential equations all start from a definite integral.

On the no-calculator multiple choice, expect direct evaluation. You will see stems like "$\int_0^{\pi/2}\cos x\,dx=$" or "$\frac{d}{dx}\int_1^{x^3}\ldots\,dt=$", and the wrong choices match the errors above: a missing $+C$, a missing lower limit, a missing chain-rule factor, or $x$-limits on a $u$-integral. You will also be asked to match a limit of a Riemann sum to its integral, and to find a definite integral from a graph made of lines and semicircles.

On the calculator multiple choice, the stems describe a rate and ask for an amount. A particle's total distance, a tank's volume at a given time, or $f(b)$ from $f(a)$ and a messy $f'$ all fall in this group. Compute the integral numerically, and keep full precision until the last step.

In free response, this unit appears inside larger problems. A table of values asks you for a left, right or trapezoidal estimate with units, and often asks whether the estimate is too high or too low. A rate-in, rate-out problem asks for an amount and a time when it is largest. A graph of $f$ defines $g(x)=\int_a^x f(t)\,dt$ and asks for values, extrema and concavity of $g$. Readers reward a written setup, such as the integral with its limits or the sum with its widths, before any number. They also reward justifications that name the function and its sign, for example that $g$ has a relative maximum at $x=3$ because $g'=f$ changes from positive to negative there.

How the exam actually asks it

Real items from the AP Calculus BC bank, easier first. The answer is marked, and every wrong choice is explained — because knowing why a distractor is tempting is most of the work.

Worked example 1Easier
  1. ACorrect
  2. B
  3. C
  4. D

Why A is right

and . Don't forget for indefinite integrals. The antiderivative, substitution, or integration-by-parts step determines the value. The setup matters first; then the algebra or evaluation gives the final result.
Why the other 3 choices miss
B
You differentiated instead of integrating. Integration is the reverse of differentiation. This distractor usually comes from choosing the wrong antiderivative step, missing a constant, or mishandling substitution. The integral has to be evaluated with the full setup intact.
C
The antiderivative is correct, but you forgot the . Every indefinite integral needs it. This distractor usually comes from choosing the wrong antiderivative step, missing a constant, or mishandling substitution. The integral has to be evaluated with the full setup intact.
D
Simplify: . This is the same as (A) before simplifying, but you still need . This distractor usually comes from choosing the wrong antiderivative step, missing a constant, or mishandling substitution. The integral has to be evaluated with the full setup intact.
Worked example 2Easier
A left Riemann sum with 4 equal subintervals for uses the -values:
  1. ACorrect
  2. B
  3. C
  4. D

Why A is right

Left Riemann sum uses the left endpoint of each subinterval: . Left endpoints: . The antiderivative, substitution, or integration-by-parts step determines the value. The setup matters first; then the algebra or evaluation gives the final result.
Why the other 3 choices miss
B
Those are the right endpoints. A right Riemann sum would use . This distractor usually comes from choosing the wrong antiderivative step, missing a constant, or mishandling substitution. The integral has to be evaluated with the full setup intact.
C
Five points define the subinterval boundaries, but you only evaluate at 4 left endpoints. This distractor usually comes from choosing the wrong antiderivative step, missing a constant, or mishandling substitution. The integral has to be evaluated with the full setup intact.
D
Those are midpoints. A midpoint Riemann sum uses the middle of each subinterval. This distractor usually comes from choosing the wrong antiderivative step, missing a constant, or mishandling substitution. The integral has to be evaluated with the full setup intact.
Worked example 3Easier
  1. ACorrect
  2. B
  3. C
  4. D

Why A is right

Integrate term by term: . The antiderivative, substitution, or integration-by-parts step determines the value. The setup matters first; then the algebra or evaluation gives the final result.
Why the other 3 choices miss
B
An indefinite integral needs the constant of integration . This distractor usually comes from choosing the wrong antiderivative step, missing a constant, or mishandling substitution. The integral has to be evaluated with the full setup intact.
C
That's the derivative of the integrand; integrate (raise powers) instead. This distractor usually comes from choosing the wrong antiderivative step, missing a constant, or mishandling substitution. The integral has to be evaluated with the full setup intact.
D
Divide by the new power: , not . This distractor usually comes from choosing the wrong antiderivative step, missing a constant, or mishandling substitution. The integral has to be evaluated with the full setup intact.
Worked example 4Easier
  1. A
  2. BCorrect
  3. C
  4. D

Why B is right

. The antiderivative, substitution, or integration-by-parts step determines the value. The setup matters first; then the algebra or evaluation gives the final result.
Why the other 3 choices miss
A
That's the derivative; to integrate, raise each power by one. This distractor usually comes from choosing the wrong antiderivative step, missing a constant, or mishandling substitution. The integral has to be evaluated with the full setup intact.
C
Don't forget on an indefinite integral. This distractor usually comes from choosing the wrong antiderivative step, missing a constant, or mishandling substitution. The integral has to be evaluated with the full setup intact.
D
Divide by the new power: , not . This distractor usually comes from choosing the wrong antiderivative step, missing a constant, or mishandling substitution. The integral has to be evaluated with the full setup intact.

Can you do all of these?

Tick what you can do without looking. Anything left unticked is where to go back to.

0 of 10 ticked

Ready to test yourself?

Open practice pulls from the 40 free questions in this unit. The other 475 come with the one-time AP purchase, which unlocks every AP course.

Official topic list

The official course framework breaks this unit into 14 numbered topics.

  1. 6.1Exploring Accumulations of Change
  2. 6.2Approximating Areas with Riemann Sums
  3. 6.3Riemann Sums, Summation Notation, and Definite Integral Notation
  4. 6.4The Fundamental Theorem of Calculus and Accumulation Functions
  5. 6.5Interpreting the Behavior of Accumulation Functions Involving Area
  6. 6.6Applying Properties of Definite Integrals
  7. 6.7The Fundamental Theorem of Calculus and Definite Integrals
  8. 6.8Finding Antiderivatives and Indefinite Integrals: Basic Rules and Notation
  9. 6.9Integrating Using Substitution
  10. 6.10Integrating Functions Using Long Division and Completing the Square
  11. 6.11Integrating Using Integration by Parts
  12. 6.12Using Linear Partial Fractions
  13. 6.13Evaluating Improper Integrals
  14. 6.14Selecting Techniques for Antidifferentiation

Key terms in The Integral

Ordered by how often our reviewed questions test them. Open any term to see the questions that use it.

The rest of AP Calculus BC

Every unit with its share of the exam. You are on Unit 6.

  1. 1Pre-AP Foundations7% of exam
  2. 2Limits and Continuity5% of exam
  3. 3Definition of the Derivative11% of exam
  4. 4Differentiation Rules11% of exam
  5. 5Applications of Derivatives13% of exam
  6. 6The Integral16% of exam
  7. 7Applications of Integration10% of exam
  8. 8Differential Equations8% of exam
  9. 9Parametric, Polar, and Vectors8% of exam
  10. 10Sequences and Series10% of exam