Skip to content

Unit 10 of 10

Sequences and Series

10% of the exam328 reviewed questions14 key terms15 min read

Sequences and Series is worth about 10% of the AP Calculus BC exam. Our bank tests it with 328 reviewed questions across 14 distinct ideas — 33 easier, 171 medium and 124 harder.

On this page · 12 sections

A series is an infinite sum, and this unit asks one question over and over: does adding infinitely many numbers give you a finite answer? To answer it, you first need sequences, because a series converges only if its list of partial sums $S_1, S_2, S_3, \dots$ settles on a single number. Every convergence test in the unit is a shortcut for deciding that without computing infinitely many sums. Some tests compare your series to one you already understand, such as a geometric series or a $p$-series. Others, like the Ratio Test, measure how fast the terms shrink.

The second half of the unit turns this around. Instead of asking whether a sum of numbers converges, you build functions out of infinite sums. A Taylor polynomial copies a function's value and derivatives at one point, so it approximates the function nearby. Let the polynomial run forever and you get a Taylor series, which is a power series. Power series converge on an interval, and the Ratio Test is the tool that finds it.

The two halves meet at error. When you stop a series after a few terms, you need to know how far off you are. The alternating series error bound and the Lagrange error bound both answer that, and both show up on nearly every exam. If you can choose a test, build a Taylor polynomial, find an interval of convergence and bound an error, you have the whole unit.

The unit in a minute

One line per topic. Tap any line for the full notes.

  1. Sequences and their limitsFind a sequence limit with the degree rule or the growth order: $\ln n \ll n^p \ll c^n \ll n! \ll n^n$.
  2. Geometric series and the nth-term testGeometric: converges iff $|r|<1$, sum $= \frac{\text{first term}}{1-r}$. Terms not going to 0 means divergence; terms going to 0 proves nothing.
  3. The Integral Test, p-series and comparison testsMatch your series to a $p$-series or geometric series by its leading terms, then compare. Check the Integral Test's conditions before you use it.
  4. Ratio Test and choosing a testFactorials and exponentials mean Ratio Test. $L=1$ means you need a different test, not that the series diverges.
  5. Alternating series and absolute vs. conditional convergenceThree possible answers: absolutely convergent, conditionally convergent, or divergent. Test $\sum |a_n|$ first, then the signed series.
  6. Taylor and Maclaurin polynomialsCoefficient $= \frac{f^{(k)}(a)}{k!}$; to recover a derivative, multiply the coefficient by $k!$.
  7. Taylor series and power series operationsBuild new series from $e^x$, $\sin x$, $\cos x$ and $\frac{1}{1-x}$ by substituting, multiplying, differentiating or integrating.
  8. Radius and interval of convergence; error boundsRatio Test for the open interval, then test both endpoints separately. Lagrange uses the $(n+1)$th derivative; the alternating bound uses the first omitted term.
Grind Sequences and Series questionsAlready know this? Skip the notes and prove it.

The big ideas

A series is the limit of its partial sums

$\sum a_n$ means the limit of $S_n = a_1 + a_2 + \dots + a_n$. If that limit is a finite number, the series converges to it. Keep two limits apart: the limit of the terms $a_n$ and the limit of the partial sums $S_n$. For $\sum 1/n$ the terms go to 0, but the sums grow without bound, so the series diverges. Terms going to 0 is required for convergence, but it is never enough by itself.

Every test is a comparison to something you already know

You know exactly how geometric series behave ($|r|<1$ converges) and how $p$-series behave ($p>1$ converges). The Comparison and Limit Comparison Tests use those directly. The Ratio Test checks whether your series shrinks like a geometric series with ratio below 1. The Integral Test compares the sum to an improper integral. Picking a test is really picking which known series your series resembles.

Polynomials can stand in for functions

A degree-$n$ Taylor polynomial matches $f$ and its first $n$ derivatives at a center $x=a$. Each coefficient is $f^{(k)}(a)/k!$, and the factorial is what makes the derivatives come out right. More terms give a better fit near the center. A Taylor series is the infinite version. For the functions in this course, it equals the function on its interval of convergence. In general, a Taylor series equals $f$ only where the remainder goes to 0.

An approximation is only useful with an error bound

Stopping a series early leaves an error. For an alternating series that meets the Alternating Series Test, the error is at most the size of the first term you left out. For any Taylor polynomial, the Lagrange error bound caps the error using the next derivative. The exam rewards you for naming the bound and showing the numbers that go into it.

Study notes

8 topics. Each one opens with its key idea, then the detail you need to use it.

1. Sequences and their limits

Key idea: Find a sequence limit with the degree rule or the growth order: $\ln n \ll n^p \ll c^n \ll n! \ll n^n$.

A sequence is an ordered list $a_1, a_2, a_3, \dots$ given by a formula in $n$. It converges if $a_n$ approaches one finite number as $n \to \infty$. Otherwise it diverges, either by growing without bound or by oscillating. $a_n = (-1)^n$ diverges because it jumps between $-1$ and $1$ forever and never settles on either value.

For rational expressions, compare the degrees of the top and bottom. If the degrees match, the limit is the ratio of the leading coefficients, so $\frac{3n^2+1}{5n^2-2} \to \frac{3}{5}$. If the top has the higher degree, the sequence diverges to $+\infty$ or $-\infty$, depending on the signs of the leading coefficients. If the bottom wins, the limit is 0. You can check the equal-degree case by dividing everything by $n$: $\frac{n}{n+1} = \frac{1}{1+1/n} \to 1$.

For everything else, use the growth order. From slowest to fastest: $\ln n$, then powers $n^p$, then exponentials $c^n$, then $n!$, then $n^n$. The faster one wins any ratio, so $\frac{\ln n}{n} \to 0$, $\frac{2^n}{n!} \to 0$ and $\frac{n!}{n^n} \to 0$. Also memorize $\left(1+\frac{1}{n}\right)^n \to e$. One theorem matters too: a sequence that is both bounded and monotonic (always rising or always falling) must converge, because it has nowhere else to go.

2. Geometric series and the nth-term test

Key idea: Geometric: converges iff $|r|<1$, sum $= \frac{\text{first term}}{1-r}$. Terms not going to 0 means divergence; terms going to 0 proves nothing.

A geometric series multiplies by the same ratio $r$ each step: $a + ar + ar^2 + \dots$. It converges exactly when $|r| < 1$, and then its sum is $\frac{a}{1-r}$, where $a$ is the first term. So $\sum_{n=0}^{\infty} \left(\frac{1}{2}\right)^n = \frac{1}{1-1/2} = 2$. The formula comes from the partial sums: $S_n = a\frac{1-r^n}{1-r}$, and $r^n \to 0$ when $|r|<1$.

Watch the starting index. $\sum_{n=1}^{\infty} \left(\frac{1}{2}\right)^n$ starts at $\frac{1}{2}$, so its sum is $\frac{1/2}{1/2} = 1$. Always plug the starting index into the formula to get $a$. Do not just read off the coefficient.

The nth-term test (also called the Divergence Test) is your first check on any series. If $\lim a_n \neq 0$, or the limit does not exist, the series diverges. The reason is simple: if the terms do not shrink to 0, you keep adding chunks of a fixed size and the sum cannot settle. For example, $\sum \frac{n}{n+1}$ diverges because its terms approach 1. The test only works one way. If $\lim a_n = 0$, the test tells you nothing, and you must try another test.

3. The Integral Test, p-series and comparison tests

Key idea: Match your series to a $p$-series or geometric series by its leading terms, then compare. Check the Integral Test's conditions before you use it.

The Integral Test links $\sum f(n)$ to $\int_1^{\infty} f(x)\,dx$. It applies only if $f$ is positive, continuous and decreasing. Then the sum and the integral either both converge or both diverge, because the terms are rectangle areas that sit just above or below the curve. The sum and the integral usually have different values, so the test tells you whether the series converges, not what it adds up to.

The Integral Test proves the $p$-series rule: $\sum \frac{1}{n^p}$ converges if $p > 1$ and diverges if $p \le 1$. The harmonic series $\sum \frac{1}{n}$ ($p=1$) diverges, even though its terms go to 0. Memorize this rule, because it feeds every comparison.

The Direct Comparison Test works for positive terms. If $0 \le a_n \le b_n$ and $\sum b_n$ converges, then $\sum a_n$ converges too. If $a_n \ge b_n$ and $\sum b_n$ diverges, so does $\sum a_n$. The inequality has to point the right way. Being smaller than a divergent series proves nothing.

The Limit Comparison Test avoids the inequality. Compute $\lim \frac{a_n}{b_n}$. If it is a finite positive number, the two series behave the same way. To test $\sum \frac{2n+1}{n^3+4}$, compare it to $\sum \frac{1}{n^2}$, built from the leading terms. The limit is 2, and $p=2>1$, so the series converges.

4. Ratio Test and choosing a test

Key idea: Factorials and exponentials mean Ratio Test. $L=1$ means you need a different test, not that the series diverges.

The Ratio Test computes $L = \lim \left|\frac{a_{n+1}}{a_n}\right|$. If $L < 1$ the series converges absolutely, if $L > 1$ it diverges, and if $L = 1$ the test gives no answer. It works because a series with $L<1$ eventually shrinks at least as fast as a geometric series with some ratio below 1.

Use it whenever you see factorials or exponentials, because they cancel cleanly in the ratio. For $\sum \frac{n!}{n^n}$, the ratio simplifies to $\left(\frac{n}{n+1}\right)^n$, which approaches $\frac{1}{e} \approx 0.37$. That is below 1, so the series converges. Trying the Integral Test here would mean integrating a factorial, which you cannot do. The Ratio Test always returns $L=1$ on $p$-series and rational expressions, so do not waste time on it there.

The Root Test, $\lim \sqrt[n]{|a_n|}$, uses the same cutoffs. It is not required by the course framework, but it is handy when the whole term is raised to the $n$th power.

A fast strategy works on most problems: 1. Do the terms go to 0? If not, it diverges. 2. Is it geometric or a $p$-series? Use the known rule. 3. Factorials or $c^n$? Use the Ratio Test. 4. Alternating signs? Use the Alternating Series Test. 5. Looks like a rational function? Use Limit Comparison. 6. Easy to integrate and decreasing? Use the Integral Test.

5. Alternating series and absolute vs. conditional convergence

Key idea: Three possible answers: absolutely convergent, conditionally convergent, or divergent. Test $\sum |a_n|$ first, then the signed series.

An alternating series has terms that switch sign, like $\sum (-1)^{n} b_n$ with $b_n > 0$. The Alternating Series Test says it converges if $b_n$ decreases and $b_n \to 0$. The partial sums step back and forth, and each step is shorter than the last, so they close in on one value. That is why $\sum \frac{(-1)^n}{n}$ converges. Its sum is $-\ln 2$, not 0. That value comes from the series $\ln(1+x) = x - \frac{x^2}{2} + \frac{x^3}{3} - \dots$ at $x=1$, with every sign flipped. Terms going to 0 tells you nothing about the value of the sum.

Next, ask what happens if you remove the signs. If $\sum |a_n|$ converges, the series converges absolutely. If $\sum a_n$ converges but $\sum |a_n|$ diverges, it converges conditionally. For $\sum \frac{(-1)^n}{n}$, the absolute version is the harmonic series, which diverges. So the series converges conditionally. In contrast, $\sum \frac{(-1)^n}{n^2}$ converges absolutely, since $p=2$.

Absolute convergence is the stronger result, because it implies plain convergence. A conditionally convergent series depends on its signs to cancel, and only that cancelling keeps it finite.

The Alternating Series Test also gives an error bound. If you stop after $n$ terms, the error $|S - S_n|$ is at most $b_{n+1}$, the first term you left out. The true sum also lies between any two consecutive partial sums. So for $\sum \frac{(-1)^{n+1}}{n}$, using four terms gives an error under $\frac{1}{5}$.

6. Taylor and Maclaurin polynomials

Key idea: Coefficient $= \frac{f^{(k)}(a)}{k!}$; to recover a derivative, multiply the coefficient by $k!$.

The Taylor polynomial of degree $n$ for $f$ centered at $x=a$ is $P_n(x) = f(a) + f'(a)(x-a) + \frac{f''(a)}{2!}(x-a)^2 + \dots + \frac{f^{(n)}(a)}{n!}(x-a)^n$. A Maclaurin polynomial is the special case $a=0$. Each coefficient is $\frac{f^{(k)}(a)}{k!}$. The $k!$ is there because differentiating $(x-a)^k$ a total of $k$ times produces $k!$. Dividing by it makes the $k$th derivative of $P_n$ equal $f^{(k)}(a)$ exactly.

Exam problems often give you a table of derivatives instead of a formula. Suppose $f(2)=3$, $f'(2)=-1$, $f''(2)=4$ and $f'''(2)=12$. Then $P_3(x) = 3 - (x-2) + \frac{4}{2}(x-2)^2 + \frac{12}{6}(x-2)^3$, which simplifies to $3 - (x-2) + 2(x-2)^2 + 2(x-2)^3$. The most common slip is forgetting to divide by the factorial.

You can also read derivatives back out. If a series has coefficient $c_k$ on $(x-a)^k$, then $f^{(k)}(a) = k!\,c_k$. Questions ask for things like $f^{(4)}(0)$ this way.

The polynomial also shows what $f$ is doing at the center. The sign of the $(x-a)^2$ coefficient matches the sign of $f''(a)$, so it tells you the concavity. If $f'(a)=0$ and $f''(a) \neq 0$, the sign of the $(x-a)^2$ coefficient tells you whether $a$ is a local min (positive) or a local max (negative). If that coefficient is 0, this test gives no answer, and $a$ could be neither, as with $f(x)=x^3$ at $a=0$.

7. Taylor series and power series operations

Key idea: Build new series from $e^x$, $\sin x$, $\cos x$ and $\frac{1}{1-x}$ by substituting, multiplying, differentiating or integrating.

Memorize four Maclaurin series: $e^x = 1 + x + \frac{x^2}{2!} + \frac{x^3}{3!} + \dots$ (all $x$) $\sin x = x - \frac{x^3}{3!} + \frac{x^5}{5!} - \dots$ (all $x$) $\cos x = 1 - \frac{x^2}{2!} + \frac{x^4}{4!} - \dots$ (all $x$) $\frac{1}{1-x} = 1 + x + x^2 + x^3 + \dots$ for $|x|<1$.

You rarely build a new series from derivatives. You build it from these by four operations. Substitution: replace $x$ with an expression. For $e^{-x^2}$, put $u=-x^2$ into $e^u$ to get $1 - x^2 + \frac{x^4}{2!} - \frac{x^6}{3!} + \dots$. Wrap the whole expression in brackets so the negative sign survives, because $(-x^2)^2 = +x^4$. Multiplication: $x\cos x$ is $x$ times each term of $\cos x$. Differentiation and integration: work term by term. Differentiating $\frac{1}{1-x}$ gives $\frac{1}{(1-x)^2} = 1 + 2x + 3x^2 + \dots$. Integrating $\frac{1}{1+x} = 1 - x + x^2 - \dots$ gives $\ln(1+x) = x - \frac{x^2}{2} + \frac{x^3}{3} - \dots$.

Differentiating or integrating never changes the radius of convergence. It can change what happens at the endpoints, though, so check them again.

8. Radius and interval of convergence; error bounds

Key idea: Ratio Test for the open interval, then test both endpoints separately. Lagrange uses the $(n+1)$th derivative; the alternating bound uses the first omitted term.

A power series $\sum c_n (x-a)^n$ converges on an interval centered at $a$. To find it, run the Ratio Test with $x$ left in. Take $\sum \frac{(x-3)^n}{n\,2^n}$. The ratio limit is $\frac{|x-3|}{2}$, and setting it below 1 gives $|x-3| < 2$. The radius is 2, so the series converges on $1 < x < 5$.

The Ratio Test gives $L=1$ at the endpoints, so test each one by hand. At $x=5$ you get $\sum \frac{1}{n}$, which diverges. At $x=1$ you get $\sum \frac{(-1)^n}{n}$, which converges by the Alternating Series Test. The interval is $[1, 5)$. Skipping the endpoint checks is the most common way to lose this point.

The Lagrange error bound covers any Taylor polynomial: $|f(x) - P_n(x)| \le \frac{M}{(n+1)!}|x-a|^{n+1}$. Here $M$ is the largest value of $|f^{(n+1)}|$ between $a$ and $x$. Notice it uses the next derivative after the last one in your polynomial.

For example, $\sin(0.2) \approx 0.2 - \frac{0.2^3}{6} \approx 0.198667$. Every derivative of $\sin$ is at most 1 in size, so $M=1$. Lagrange then gives an error at most $\frac{0.2^4}{4!} \approx 0.0000667$. The series alternates too, so the alternating bound also applies. It gives the first omitted term, $\frac{0.2^5}{5!} \approx 0.0000027$. Use the alternating bound only when the series truly alternates with decreasing terms.

Common mistakes

Drawn from the wrong answers students actually pick on these questions.

Giving the first term or the common ratio as the sum of a geometric series. For $\sum_{n=0}^{\infty} (1/2)^n$, students answer 1 or $\frac{1}{2}$. Some say it diverges.

The sum is $\frac{\text{first term}}{1-r} = \frac{1}{1/2} = 2$. Neither number alone is the sum, and $|r| = \frac{1}{2} < 1$ guarantees convergence. Find the first term by plugging in the starting index.

Choosing the Integral Test or a Comparison Test for a series with factorials, such as $\sum \frac{n!}{n^n}$, then getting stuck or calling it divergent.

You cannot integrate a factorial, and finding a comparison series is slow. The Ratio Test cancels factorials cleanly. Here the ratio approaches $\frac{1}{e} < 1$, so the series converges.

Losing the sign when substituting into a known series. For $e^{-x^2}$, students write $1 + x^2 + \dots$, or put $\frac{x^4}{4}$ in place of $\frac{x^4}{2}$, or change the constant to $-1$.

Replace $x$ with the bracketed expression $(-x^2)$. The linear term becomes $-x^2$. The next term is $\frac{(-x^2)^2}{2!} = \frac{x^4}{2}$, because the factorial stays $2!$. The constant is still $e^0 = 1$.

Calling $\sum \frac{(-1)^n}{n}$ absolutely convergent, divergent, or "convergent to 0".

It converges by the Alternating Series Test, but $\sum \left|\frac{(-1)^n}{n}\right| = \sum \frac{1}{n}$ diverges, so it converges conditionally. The terms go to 0, but the sum is $-\ln 2$. A series converging means its partial sums settle, not that the sum is 0.

Botching the degree rule for sequence limits. Students answer 0 or $\infty$ for $\frac{n}{n+1}$, or use the wrong coefficients and get $\frac{1}{5}$ for $\frac{3n^2+1}{5n^2-2}$.

Equal degrees give a finite limit equal to the ratio of the leading coefficients: 1 and $\frac{3}{5}$. To check, divide the top and bottom by the highest power of $n$ and let every $\frac{1}{n}$ term go to 0.

Saying $a_n = (-1)^n$ converges to 0 or to 1.

The terms stay at $-1$ and $1$ forever, so they never approach 0. Half of them are $-1$, so they never settle at 1 either. A sequence that oscillates between two values diverges.

How this unit shows up on the exam

Series questions appear in both multiple-choice sections and almost always in one free-response question. The College Board's course framework weights this unit at about 17–18% of the BC exam, which makes it one of the two largest units. Multiple-choice stems are short. They ask "Which of the following series converge?" with a list of three numbered series, or they ask which test applies. Other stems ask for the sum of a geometric series, the interval of convergence of a power series, or the coefficient of $x^4$ in a series built by substitution. Watch for the Roman-numeral format, which punishes you for being right about two series and wrong about the third.

The free-response series question usually gives a function by its derivatives at a point, or by a series written in sigma notation. Typical parts ask you to write a Taylor polynomial, find an interval of convergence with endpoint checks, and bound an error with the Lagrange or alternating bound. Some parts ask you to differentiate or integrate the series term by term, or to use the polynomial to approximate a value.

Readers reward named tests with their conditions checked. If you use the Alternating Series Test, state that the terms decrease and go to 0. If you use the Ratio Test, write the limit and compare it to 1. When you test an endpoint, name the series you get ("harmonic series, diverges") instead of just writing a verdict. For an error bound, write the formula with your numbers substituted, then state the inequality. A bare decimal with no setup usually earns nothing, even when it is right.

How the exam actually asks it

Real items from the AP Calculus BC bank, easier first. The answer is marked, and every wrong choice is explained — because knowing why a distractor is tempting is most of the work.

Worked example 1Easier
  1. A
  2. BCorrect
  3. C
  4. Ddiverges

Why B is right

Geometric series with , . Sum . The convergence test, series expansion, or Taylor-series rule determines the result. The correct test or expansion is what decides convergence, divergence, or the coefficient pattern.
Why the other 3 choices miss
A
You may be thinking of the first term. The infinite sum is the first term divided by . This distractor usually comes from choosing the wrong convergence test or confusing the series pattern. The correct result depends on the proper test or expansion for the series given.
C
That's the common ratio, not the sum. Apply the formula . This distractor usually comes from choosing the wrong convergence test or confusing the series pattern. The correct result depends on the proper test or expansion for the series given.
D
, so the series converges. This distractor usually comes from choosing the wrong convergence test or confusing the series pattern. The correct result depends on the proper test or expansion for the series given.
Worked example 2Easier
Find .
  1. A
  2. BCorrect
  3. C
  4. Ddoes not exist

Why B is right

as . The convergence test, series expansion, or Taylor-series rule determines the result. The correct test or expansion is what decides convergence, divergence, or the coefficient pattern.
Why the other 3 choices miss
A
Divide top and bottom by : , not . This distractor usually comes from choosing the wrong convergence test or confusing the series pattern. The correct result depends on the proper test or expansion for the series given.
C
The degrees match (both degree ), so the limit is the ratio of leading coefficients, . This distractor usually comes from choosing the wrong convergence test or confusing the series pattern. The correct result depends on the proper test or expansion for the series given.
D
This is a convergent sequence; the limit is . This distractor usually comes from choosing the wrong convergence test or confusing the series pattern. The correct result depends on the proper test or expansion for the series given.
Worked example 3Easier
Does the sequence converge?
  1. AYes, to
  2. BYes, to
  3. CYes, to
  4. DNo — it oscillates between and Correct

Why D is right

alternates and never approaches a single value, so it diverges (by oscillation). The convergence test, series expansion, or Taylor-series rule determines the result. The correct test or expansion is what decides convergence, divergence, or the coefficient pattern.
Why the other 3 choices miss
A
The terms never approach ; they stay at forever. This distractor usually comes from choosing the wrong convergence test or confusing the series pattern. The correct result depends on the proper test or expansion for the series given.
B
Half the terms equal , so the sequence never settles to . This distractor usually comes from choosing the wrong convergence test or confusing the series pattern. The correct result depends on the proper test or expansion for the series given.
C
Half the terms equal , so it never settles to . This distractor usually comes from choosing the wrong convergence test or confusing the series pattern. The correct result depends on the proper test or expansion for the series given.
Worked example 4Easier
Find .
  1. A
  2. B
  3. CCorrect
  4. D

Why C is right

for every ; here . The convergence test, series expansion, or Taylor-series rule determines the result. The correct test or expansion is what decides convergence, divergence, or the coefficient pattern.
Why the other 3 choices miss
A
As , , so . This distractor usually comes from choosing the wrong convergence test or confusing the series pattern. The correct result depends on the proper test or expansion for the series given.
B
The exponent does not become the limit; for any . This distractor usually comes from choosing the wrong convergence test or confusing the series pattern. The correct result depends on the proper test or expansion for the series given.
D
The denominator grows, so the fraction shrinks to . This distractor usually comes from choosing the wrong convergence test or confusing the series pattern. The correct result depends on the proper test or expansion for the series given.

Can you do all of these?

Tick what you can do without looking. Anything left unticked is where to go back to.

0 of 10 ticked

Ready to test yourself?

Open practice pulls from the 40 free questions in this unit. The other 288 come with the one-time AP purchase, which unlocks every AP course.

Official topic list

The official course framework breaks this unit into 15 numbered topics.

  1. 10.1Defining Convergent and Divergent Infinite Series
  2. 10.2Working with Geometric Series
  3. 10.3The nth Term Test for Divergence
  4. 10.4Integral Test for Convergence
  5. 10.5Harmonic Series and p-Series
  6. 10.6Comparison Tests for Convergence
  7. 10.7Alternating Series Test for Convergence
  8. 10.8Ratio Test for Convergence
  9. 10.9Determining Absolute or Conditional Convergence
  10. 10.10Alternating Series Error Bound
  11. 10.11Finding Taylor Polynomial Approximations of Functions
  12. 10.12Lagrange Error Bound
  13. 10.13Radius and Interval of Convergence of Power Series
  14. 10.14Finding Taylor or Maclaurin Series for a Function
  15. 10.15Representing Functions as Power Series

Key terms in Sequences and Series

Ordered by how often our reviewed questions test them. Open any term to see the questions that use it.

The rest of AP Calculus BC

Every unit with its share of the exam. You are on Unit 10.

  1. 1Pre-AP Foundations7% of exam
  2. 2Limits and Continuity5% of exam
  3. 3Definition of the Derivative11% of exam
  4. 4Differentiation Rules11% of exam
  5. 5Applications of Derivatives13% of exam
  6. 6The Integral16% of exam
  7. 7Applications of Integration10% of exam
  8. 8Differential Equations8% of exam
  9. 9Parametric, Polar, and Vectors8% of exam
  10. 10Sequences and Series10% of exam