Skip to content

Unit 5 of 10

Applications of Derivatives

13% of the exam440 reviewed questions10 key terms18 min read

Applications of Derivatives is worth about 13% of the AP Calculus BC exam. Our bank tests it with 440 reviewed questions across 10 distinct ideas — 52 easier, 208 medium and 180 harder.

On this page · 12 sections

Every question in this unit turns a derivative into a decision. A derivative is a rate, so you use it to say how fast a tank fills, which way a particle moves, or where a graph peaks. The sign of $f'$ tells you whether $f$ rises or falls. The sign of $f''$ tells you which way $f$ bends. Almost every problem here is one of those two sign questions in a different setting.

The unit has four working parts. First, you read derivatives in context: units, meaning, and motion along a line. Second, you analyze graphs with critical points, the First and Second Derivative Tests, concavity, inflection points, and absolute extrema on a closed interval. Third, you solve applied problems. In related rates several quantities change together, and in optimization you find the best value under a constraint. Fourth, you use L'Hôpital's Rule, which uses derivatives to evaluate limits of the form $\frac{0}{0}$ or $\frac{\infty}{\infty}$.

These skills carry into the rest of BC. Particle motion returns in the integration units. There, integrating velocity gives displacement, and integrating speed $|v(t)|$ gives total distance traveled. The same sign logic drives parametric and polar motion. L'Hôpital's Rule often comes back in series work, for example in the nth-term test or the ratio test, after you treat $n$ as a continuous variable $x$. On free-response questions, this is the unit where readers ask you to justify, so a correct number without the reason behind it often earns only part of the credit.

The unit in a minute

One line per topic. Tap any line for the full notes.

  1. Interpreting the derivative in contextSay what changes, when, how fast, in what units, and in which direction.
  2. Straight-line motionMatching signs for $v$ and $a$ mean speeding up; a sign change in $v$ means a change of direction.
  3. Critical points, extreme values, and the First Derivative TestCritical points come from $f'$. A sign change in $f'$ makes a relative extremum, and a closed interval adds the endpoints as candidates.
  4. Concavity and the Second Derivative TestThe sign of $f''$ gives concavity, a sign change in $f''$ gives an inflection point, and $f''(c) = 0$ leaves the Second Derivative Test with no answer.
  5. Connecting f, f', and f'' (curve sketching)The height of $f'$ tells you where $f$ rises or falls. The slope of $f'$ tells you how $f$ bends.
  6. Related ratesWrite the equation, differentiate with respect to $t$, and only then plug in the numbers for the instant.
  7. OptimizationUse the constraint to get one variable, set the domain, find and justify the extremum, and answer the exact question asked.
  8. L'Hôpital's RuleConfirm $\frac{0}{0}$ or $\frac{\infty}{\infty}$ first, differentiate top and bottom separately, and rewrite other forms as a fraction before you start.
Grind Applications of Derivatives questionsAlready know this? Skip the notes and prove it.

The big ideas

Sign before size

Most questions here care whether a derivative is positive, negative, or zero, not how big it is. $f' > 0$ means $f$ is increasing. $f'' > 0$ means $f'$ is increasing, so the graph of $f$ is concave up. When velocity and acceleration have the same sign, a particle is speeding up. Build a sign chart first, because one chart answers extrema, concavity, and motion questions together.

A derivative is a rate with units

$f'(a)$ is the instantaneous rate of change of $f$ at the single input $a$. Its units are output units per input unit. If $V$ is in liters and $t$ is in minutes, $V'$ is liters per minute and $V''$ is liters per minute per minute. A context answer must say what changes, at what moment, how fast, and in which direction. Leaving out one of those pieces is the usual way students lose an interpretation point.

Candidates first, then a test

Extreme values can happen in only a few places: where $f' = 0$, where $f'$ does not exist, or at an endpoint. So every extremum problem has two steps. First list the candidates. Then test them with a sign change in $f'$, the sign of $f''$, or by plugging every candidate into $f$ on a closed interval. Skipping either step is how wrong answers happen.

Write the relationship, then differentiate

Related rates and optimization both start with an equation that links the quantities, such as $x^2 + y^2 = 100$ for a ladder or $2x + y = 120$ for a fence. Once that equation is right, the calculus is usually short. In related rates, you differentiate with respect to time before you plug in the numbers for the instant. In optimization, you use the constraint to cut the function down to one variable before you differentiate.

Study notes

8 topics. Each one opens with its key idea, then the detail you need to use it.

1. Interpreting the derivative in context

Key idea: Say what changes, when, how fast, in what units, and in which direction.

A derivative statement like $P'(5) = 2.4$ packs four facts into one line. Suppose $P(t)$ is a town's population in thousands and $t$ is years since 2020. Then $P'(5) = 2.4$ means that in 2025 the population is growing at a rate of 2.4 thousand people per year. Notice the pieces: the quantity (population), the moment ($t = 5$), the rate (2.4 thousand per year), and the direction (growing, because the value is positive). A negative value flips the direction word to falling or decreasing.

Units follow one rule. The derivative's units are the output's units divided by the input's units. If $D(t)$ is depth in feet and $t$ is hours, $D'$ is feet per hour and $D''$ is feet per hour per hour. Students often give the units of $D$ itself, or flip the fraction to hours per foot.

Keep instantaneous and average apart. $P'(5)$ describes the single instant $t = 5$. The change from $t = 0$ to $t = 5$ is $P(5) - P(0)$, and the average rate is that change divided by 5. Marginal cost is the business version of the same idea. If $C(x)$ is the cost of making $x$ items and $C'(300) = 7$, then the 301st item costs about 7 dollars extra. The word "about" matters, because the derivative is a linear estimate, not an exact cost.

2. Straight-line motion

Key idea: Matching signs for $v$ and $a$ mean speeding up; a sign change in $v$ means a change of direction.

A particle moving on a line has position $s(t)$, velocity $v(t) = s'(t)$, and acceleration $a(t) = v'(t) = s''(t)$. Velocity's sign gives direction: positive means moving right (or up), negative means moving left. Speed is $|v(t)|$, so speed is never negative even when velocity is.

Take $s(t) = t^3 - 9t^2 + 24t$ for $t \ge 0$. Then $v(t) = 3t^2 - 18t + 24 = 3(t - 2)(t - 4)$ and $a(t) = 6t - 18$. Velocity is positive before $t = 2$, negative between 2 and 4, and positive after 4. The particle changes direction at $t = 2$ and $t = 4$, because $v$ changes sign there. A zero of $v$ alone is not enough, since the sign has to switch.

Speeding up or slowing down depends on whether $v$ and $a$ agree in sign. At $t = 2.5$, $v = -2.25$ and $a = -3$. Both are negative, so the particle is speeding up even though it moves left. At $t = 3.5$, $v = -2.25$ and $a = 3$, so it is slowing down.

Total distance is not the same as displacement. From $t = 0$ to $t = 5$, the position goes from 0 to 20 at $t = 2$, back to 16 at $t = 4$, then up to 20 at $t = 5$. Displacement is $20 - 0 = 20$. Total distance adds each leg separately: $20 + 4 + 4 = 28$. Always split the trip at every turnaround.

3. Critical points, extreme values, and the First Derivative Test

Key idea: Critical points come from $f'$. A sign change in $f'$ makes a relative extremum, and a closed interval adds the endpoints as candidates.

A critical point of $f$ is an input $c$ in the domain where $f'(c) = 0$ or $f'(c)$ does not exist. You find them from the derivative, never from $f$ itself. Setting $f(x) = 0$ finds the $x$-intercepts, which is a different question.

Take $f(x) = x^4 - 4x^3$. Then $f'(x) = 4x^3 - 12x^2 = 4x^2(x - 3)$, so the critical points are $x = 0$ and $x = 3$. A critical point is only a candidate. The First Derivative Test decides what it is. If $f'$ changes from positive to negative at $c$, $f$ has a relative maximum there. If $f'$ changes from negative to positive, it is a relative minimum. If $f'$ keeps the same sign, there is no extremum. Here $4x^2$ is never negative, so the sign of $f'$ matches the sign of $x - 3$. That means $f'$ is negative on both sides of 0, so $x = 0$ is not an extremum. At $x = 3$, $f'$ goes from negative to positive, so $f$ has a relative minimum.

For absolute extrema on a closed interval, use the Extreme Value Theorem. A continuous function on $[a, b]$ must reach both an absolute maximum and an absolute minimum. They occur at critical points or endpoints, so test every candidate in $f$. On $[-1, 4]$: $f(-1) = 5$, $f(0) = 0$, $f(3) = -27$, $f(4) = 0$. The absolute maximum is 5 at $x = -1$, an endpoint, and the absolute minimum is $-27$ at $x = 3$.

4. Concavity and the Second Derivative Test

Key idea: The sign of $f''$ gives concavity, a sign change in $f''$ gives an inflection point, and $f''(c) = 0$ leaves the Second Derivative Test with no answer.

Concavity describes how the slope is changing. If $f''(x) > 0$, then $f'$ is increasing, so the slopes keep rising and the graph bends like a cup: concave up. If $f''(x) < 0$, the slopes are decreasing and the graph is concave down. Concavity is separate from direction. A graph with $f' > 0$ and $f'' < 0$ is still climbing, but it is leveling off, like the upper part of a hill.

An inflection point is where the concavity changes, which means $f''$ changes sign. Using $f(x) = x^4 - 4x^3$ again, $f''(x) = 12x^2 - 24x = 12x(x - 2)$. The sign of $f''$ is positive, then negative, then positive, so there are inflection points at $x = 0$ and $x = 2$. Be careful, because $f''(c) = 0$ alone does not prove an inflection point. For $g(x) = x^4$, $g''(0) = 0$, but $g''$ is positive on both sides, so the graph stays concave up.

The Second Derivative Test is a shortcut for classifying a critical point where $f'(c) = 0$. If $f''(c) > 0$, the graph is a cup there, so $f(c)$ is a relative minimum. If $f''(c) < 0$, it is a relative maximum. For our $f$, $f''(3) = 36 > 0$, which confirms the minimum at $x = 3$. But $f''(0) = 0$, and then the test says nothing. You must fall back on the First Derivative Test, which showed there is no extremum at 0.

5. Connecting f, f', and f'' (curve sketching)

Key idea: The height of $f'$ tells you where $f$ rises or falls. The slope of $f'$ tells you how $f$ bends.

Many questions hand you the graph of $f'$ and ask about $f$. The trap is reading it as if it were $f$. Translate each feature of the $f'$ graph one level down.

Where the graph of $f'$ is above the $x$-axis, $f$ is increasing. Where it is below, $f$ is decreasing. Where $f'$ crosses the axis from above to below, $f$ has a relative maximum. Where it crosses from below to above, $f$ has a relative minimum. If $f'$ only touches the axis and bounces back, $f$ has a horizontal tangent but no extremum.

Concavity comes from the slope of the $f'$ graph, not its height. Where $f'$ is rising, $f''$ is positive and $f$ is concave up. Where $f'$ is falling, $f$ is concave down. So the inflection points of $f$ sit at the peaks and valleys of the $f'$ graph, where $f'$ switches between rising and falling.

To sketch $f$ from a formula, build one table with intervals across the top and three rows: the sign of $f'$, the sign of $f''$, and the resulting shape. Each interval gets one of four shapes: increasing and concave up, increasing and concave down, decreasing and concave up, or decreasing and concave down. Then mark the extrema and inflection points and connect the pieces. For $f(x) = x^4 - 4x^3$, the table reads decreasing and concave up before 0, decreasing and concave down from 0 to 2, decreasing and concave up from 2 to 3, and increasing and concave up after 3.

7. Optimization

Key idea: Use the constraint to get one variable, set the domain, find and justify the extremum, and answer the exact question asked.

Optimization asks for the largest or smallest value of a quantity under a limit, such as a fixed amount of fencing or material. The hard part is building the function.

Work in this order. Name the quantity to optimize and write a formula for it. That formula usually has two variables. Write the constraint equation, solve it for one variable, and substitute so the function has a single variable. State the domain that makes physical sense. Then find critical points, test them, and answer the question that was actually asked.

Suppose you have 120 meters of fencing for a rectangular pen along a river, with no fence on the river side. Let $x$ be each side perpendicular to the river and $y$ the side parallel to it. The constraint is $2x + y = 120$, so $y = 120 - 2x$. The area is $A(x) = x(120 - 2x) = 120x - 2x^2$ on $0 \le x \le 60$. Then $A'(x) = 120 - 4x = 0$ gives $x = 30$, so $y = 60$ and $A = 1800$ square meters. Since $A''(x) = -4 < 0$, this critical point is the maximum.

Two habits cost points. One is using the wrong constraint, such as fencing all four sides. The other is guessing equal sides. Three sides of 40 meters each give only 1600 square meters, which is less than 1800. On a free-response question, you also need a reason the value is a maximum, such as the sign change of $A'$ or the candidates test.

8. L'Hôpital's Rule

Key idea: Confirm $\frac{0}{0}$ or $\frac{\infty}{\infty}$ first, differentiate top and bottom separately, and rewrite other forms as a fraction before you start.

L'Hôpital's Rule evaluates limits that come out as $\frac{0}{0}$ or $\frac{\infty}{\infty}$ when you substitute. In those cases, $\lim \frac{f(x)}{g(x)} = \lim \frac{f'(x)}{g'(x)}$, provided the new limit exists. The rule also needs $f$ and $g$ to be differentiable near the point, and $g'(x)$ must not be 0 there. You differentiate the top and the bottom separately. Do not use the quotient rule, which answers a different question.

Always check the form first. If substitution gives a number like $\frac{3}{2}$ or $\frac{5}{0}$, the rule does not apply, and using it gives a wrong answer. A $\frac{0}{0}$ form also does not mean the limit is 0 or infinite. The top and bottom are both shrinking toward zero, and the derivatives compare how fast.

You may apply the rule more than once. For $\lim_{x \to 0} \frac{1 - \cos x}{x^2}$, substitution gives $\frac{0}{0}$. One round gives $\frac{\sin x}{2x}$, still $\frac{0}{0}$. A second round gives $\frac{\cos x}{2}$, which goes to $\frac{1}{2}$.

BC questions also use other indeterminate forms, which you must rewrite as a fraction first. For $0 \cdot \infty$, as in $\lim_{x \to 0^+} x \ln x$, write it as $\frac{\ln x}{1/x}$, which has the form $\frac{-\infty}{\infty}$. Differentiating gives $\frac{1/x}{-1/x^2} = -x$, which goes to 0. For a $1^\infty$ form, take the natural log, find that limit, then raise $e$ to it. On a free-response question, write the limits of the top and bottom separately to show the form.

Common mistakes

Drawn from the wrong answers students actually pick on these questions.

Finding critical points by setting $f(x) = 0$.

That gives the $x$-intercepts. Critical points come from $f'(x) = 0$ or from places where $f'$ is undefined. For $f(x) = x^3 - 12x$, the intercepts are $0$ and $\pm 2\sqrt{3}$, but the critical points are $x = \pm 2$, from $f'(x) = 3x^2 - 12$. Before you choose an answer, plug it into $f'$ and confirm that you really get zero.

Misreading what $f'(a)$ measures: giving the units of $f$, flipping the units, or treating $f'(a)$ as the value of $f$ or as an average change.

$f'(a)$ is an instantaneous rate at one input, in output units per input unit. If $T(t)$ is temperature in °C and $t$ is in hours, $T'(6) = -2$ means that at hour 6 the temperature is dropping at 2 °C per hour. It does not mean the temperature is 2 °C, and it does not mean the temperature fell 2 degrees over six hours. The units of $T''$ are °C per hour per hour.

Mixing up direction and concavity, for example calling a graph with $f' > 0$ and $f'' < 0$ concave up, or calling it decreasing.

Read each derivative for one fact only. The sign of $f'$ answers rising or falling. The sign of $f''$ answers cup or cap. Increasing and concave down is a hill that is still climbing but flattening out. Answer the two questions separately, then combine them.

In related rates, assuming linked quantities change at the same rate, substituting the wrong values, or flipping a ratio.

The equation links the rates; it does not make them equal. Differentiate first. Then find every missing value at that instant, often with the Pythagorean theorem, and substitute. Solve for the unknown rate step by step instead of guessing which way the ratio goes. Then check the sign, because a length that is shrinking needs a negative rate.

In optimization, writing the wrong constraint or assuming the best shape has equal sides.

Reread which sides need material. A pen against a wall or river uses three sides of fence, not four. Equal sides are best only in some problems, so let the derivative find the dimensions. As a check, a three-sided pen made from 120 m with equal 40 m sides encloses 1600 m², while the calculus answer of 30 m by 60 m encloses 1800 m².

Deciding a $\frac{0}{0}$ limit is 0 because the numerator goes to 0, or infinite because the denominator does.

When the top and bottom both approach 0, neither one decides the limit alone. Apply L'Hôpital's Rule, then substitute the original limit value into the new fraction. For $\lim_{x\to 0}\frac{e^{2x}-1}{x}$, the derivatives give $\frac{2e^{2x}}{1}$. At $x = 0$ that equals 2. It is not 0 or $\infty$, and it is not $2e^2$, which you get by plugging in the wrong input.

How this unit shows up on the exam

Multiple-choice questions in this unit are short and direct. Expect stems like "At what value of $x$ does $f$ have a relative minimum?", "Which of the following best interprets $W'(4) = 25$?", or "On which interval is the particle speeding up?" Many give you the graph of $f'$ instead of $f$ and test whether you translate it correctly. On calculator questions, the derivative may be too messy to solve by hand. You graph $v(t)$ or $f'(x)$ and find its zeros numerically, and decimal answers must be correct to three places.

Free-response questions use this unit heavily. Particle motion is one of the most common settings, with velocity given by a formula, a graph, or a table. Other common parts ask you to find and justify a relative or absolute extremum, to locate inflection points, to interpret a derivative with units, or to find a related rate in context. L'Hôpital's Rule sometimes appears as one part, often to find a limit that a later part depends on.

Readers reward precise justifications. Name the function and the sign change: "$f$ has a relative maximum at $x = 2$ because $f'$ changes from positive to negative there." Writing "the graph goes up then down" does not say which graph, and "$f'(2) = 0$" by itself proves nothing. For absolute extrema, show a candidates table with every critical point and both endpoints. For L'Hôpital's Rule, show that the numerator and denominator both approach 0, or both grow without bound, before you differentiate. In context answers, include the time, the value, the units, and the direction.

How the exam actually asks it

Real items from the AP Calculus BC bank, easier first. The answer is marked, and every wrong choice is explained — because knowing why a distractor is tempting is most of the work.

Worked example 1Easier
The critical points of occur at:
  1. A only
  2. BCorrect
  3. C
  4. D

Why B is right

. Setting gives . The rate, slope, tangent line, or extrema follow from the derivative analysis in the problem. Once the derivative is interpreted correctly, the sign or extremum test fixes the answer.
Why the other 3 choices miss
A
, so is not a critical point. This distractor usually comes from reading the slope, rate, or extremum test incorrectly. Once the derivative is interpreted correctly, the misleading value disappears.
C
You may have set instead of . Critical points come from the derivative. This distractor usually comes from reading the slope, rate, or extremum test incorrectly. Once the derivative is interpreted correctly, the misleading value disappears.
D
. Not a critical point. This distractor usually comes from reading the slope, rate, or extremum test incorrectly. Once the derivative is interpreted correctly, the misleading value disappears.
Worked example 2Easier
The critical numbers of are
  1. A and Correct
  2. B only
  3. C only
  4. D and

Why A is right

at and . The rate, slope, tangent line, or extrema follow from the derivative analysis in the problem. Once the derivative is interpreted correctly, the sign or extremum test fixes the answer.
Why the other 3 choices miss
B
has two zeros, and . This distractor usually comes from reading the slope, rate, or extremum test incorrectly. Once the derivative is interpreted correctly, the misleading value disappears.
C
Don't drop : gives both and . This distractor usually comes from reading the slope, rate, or extremum test incorrectly. Once the derivative is interpreted correctly, the misleading value disappears.
D
Those are roots of , not of . Solve . This distractor usually comes from reading the slope, rate, or extremum test incorrectly. Once the derivative is interpreted correctly, the misleading value disappears.
Worked example 3Easier
What is the absolute maximum value of on ?
  1. A
  2. BCorrect
  3. C
  4. D

Why B is right

; candidates . Absolute max . The rate, slope, tangent line, or extrema follow from the derivative analysis in the problem. Once the derivative is interpreted correctly, the sign or extremum test fixes the answer.
Why the other 3 choices miss
A
That's the absolute minimum (attained at and ). This distractor usually comes from reading the slope, rate, or extremum test incorrectly. Once the derivative is interpreted correctly, the misleading value disappears.
C
Compare at the critical numbers and endpoints ; the largest is . This distractor usually comes from reading the slope, rate, or extremum test incorrectly. Once the derivative is interpreted correctly, the misleading value disappears.
D
, not . This distractor usually comes from reading the slope, rate, or extremum test incorrectly. Once the derivative is interpreted correctly, the misleading value disappears.
Worked example 4Easier
What is the absolute minimum value of on ?
  1. A
  2. B
  3. CCorrect
  4. D

Why C is right

; candidates . Absolute min . The rate, slope, tangent line, or extrema follow from the derivative analysis in the problem. Once the derivative is interpreted correctly, the sign or extremum test fixes the answer.
Why the other 3 choices miss
A
is a candidate but not the smallest; check the critical number . This distractor usually comes from reading the slope, rate, or extremum test incorrectly. Once the derivative is interpreted correctly, the misleading value disappears.
B
That's the absolute maximum, . This distractor usually comes from reading the slope, rate, or extremum test incorrectly. Once the derivative is interpreted correctly, the misleading value disappears.
D
; the minimum value is negative. This distractor usually comes from reading the slope, rate, or extremum test incorrectly. Once the derivative is interpreted correctly, the misleading value disappears.

Can you do all of these?

Tick what you can do without looking. Anything left unticked is where to go back to.

0 of 10 ticked

Ready to test yourself?

Open practice pulls from the 40 free questions in this unit. The other 400 come with the one-time AP purchase, which unlocks every AP course.

Official topic list

The official course framework breaks this unit into 19 numbered topics.

  1. 4.1Interpreting the Meaning of the Derivative in Context
  2. 4.2Straight-Line Motion: Connecting Position, Velocity, and Acceleration
  3. 4.3Rates of Change in Applied Contexts Other Than Motion
  4. 4.4Introduction to Related Rates
  5. 4.5Solving Related Rates Problems
  6. 4.6Approximating Values of a Function Using Local Linearity and Linearization
  7. 4.7Using L'Hospital's Rule for Determining Limits of Indeterminate Forms
  8. 5.1Using the Mean Value Theorem
  9. 5.2Extreme Value Theorem, Global Versus Local Extrema, and Critical Points
  10. 5.3Determining Intervals on Which a Function Is Increasing or Decreasing
  11. 5.4Using the First Derivative Test to Determine Relative (Local) Extrema
  12. 5.5Using the Candidates Test to Determine Absolute (Global) Extrema
  13. 5.6Determining Concavity of Functions over Their Domains
  14. 5.7Using the Second Derivative Test to Determine Extrema
  15. 5.8Sketching Graphs of Functions and Their Derivatives
  16. 5.9Connecting a Function, Its First Derivative, and Its Second Derivative
  17. 5.10Introduction to Optimization Problems
  18. 5.11Solving Optimization Problems
  19. 5.12Exploring Behaviors of Implicit Relations

Key terms in Applications of Derivatives

Ordered by how often our reviewed questions test them. Open any term to see the questions that use it.

The rest of AP Calculus BC

Every unit with its share of the exam. You are on Unit 5.

  1. 1Pre-AP Foundations7% of exam
  2. 2Limits and Continuity5% of exam
  3. 3Definition of the Derivative11% of exam
  4. 4Differentiation Rules11% of exam
  5. 5Applications of Derivatives13% of exam
  6. 6The Integral16% of exam
  7. 7Applications of Integration10% of exam
  8. 8Differential Equations8% of exam
  9. 9Parametric, Polar, and Vectors8% of exam
  10. 10Sequences and Series10% of exam