Skip to content

Unit 6 of 7

Oscillations

6.5% of the exam89 reviewed questions22 key terms17 min read

Oscillations is worth about 6.5% of the AP Physics 1 exam. Our bank tests it with 89 reviewed questions across 22 distinct ideas — 19 easier, 52 medium and 18 harder.

On this page · 12 sections

A block bouncing on a spring and a ball swinging on a string look like two separate problems, but they follow one rule. When the net force on an object always points back toward its resting position, and its size is proportional to how far the object has moved, the object undergoes simple harmonic motion (SHM). For a spring that rule is F = -kx. The minus sign is the whole story. The force always pulls back toward the center, so the object speeds up on the way in, overshoots, slows down on the way out, turns around, and repeats.

Nearly every question in this unit asks about one of two things. The first is timing: how long one full cycle takes (the period) and which changes make it longer or shorter. The period depends only on how much inertia the system has compared with how strong its restoring force is. That is why a spring gives T = 2π√(m/k) and a pendulum gives T = 2π√(L/g). The second is energy. Amplitude sets the total energy, E = ½kA², and that fixed total is traded back and forth between kinetic and potential energy as the object moves. Amplitude changes the energy but leaves the period alone.

Of the 89 questions in our bank for this unit, 48 are tagged SHM and 29 are tagged period. Many of them are ratio problems. You change one quantity, such as length, mass, g or amplitude, and predict the new period, energy or top speed. If you can handle square roots and squares quickly and know which quantities each formula ignores, most of these points are yours. The unit also builds directly on Newton's second law and conservation of energy, so gaps in those topics show up here.

The unit in a minute

One line per topic. Tap any line for the full notes.

  1. Restoring force, equilibrium and turning pointsAt the turning points v = 0 and |a| is maximum; at equilibrium a = 0 and speed is maximum.
  2. Period, frequency and angular frequencyT = 1/f and ω = 2πf; √(k/m) gives ω in rad/s, not f in hertz.
  3. The mass-spring period and the spring constantT = 2π√(m/k): period grows with √m, shrinks with √k, and ignores amplitude and g.
  4. Effective spring constant and the vertical springParallel springs add (stiffer); series springs combine as reciprocals (softer); gravity shifts a vertical spring's equilibrium but not its period.
  5. The simple pendulum: why mass cancels and g mattersT = 2π√(L/g): independent of mass and of small amplitudes; longer for longer strings and weaker gravity.
  6. Energy partition across the cycleE = ½kA² is constant; U = ½kx² and K = E - U, so KE = PE at x = A/√2, not A/2.
  7. Maximum velocity, maximum acceleration and graphsv_max = Aω at equilibrium, a_max = Aω² at the turning points, and the a-t graph is the flipped x-t graph.
Grind Oscillations questionsAlready know this? Skip the notes and prove it.

The big ideas

A linear restoring force produces SHM

SHM happens whenever the restoring force grows in step with displacement: double the distance from equilibrium and you double the pull back. Because a = F/m, the acceleration is also proportional to displacement and always points toward equilibrium, so a = -(k/m)x. This one fact explains why the period does not depend on amplitude. Pull the mass twice as far and every force, acceleration and speed along the path doubles too. The mass covers twice the distance at twice the speed, so each cycle takes exactly the same time.

Period compares inertia with stiffness

Every SHM period has the form T = 2π√(inertia / restoring stiffness). For a mass on a spring the inertia is m and the stiffness is k, which gives T = 2π√(m/k). More mass means sluggish motion and a longer period, while a stiffer spring snaps the mass back faster and shortens it. For a pendulum the restoring stiffness is mg/L. The mass appears on the top and the bottom, so it cancels and leaves T = 2π√(L/g). That cancellation is a favorite conceptual question.

Total energy is fixed and set by amplitude

With no friction, the mechanical energy of an oscillator stays constant. Measure x from equilibrium and use U = ½kx² as the oscillator's potential energy. At a turning point the mass stops for an instant, so all the oscillation energy is potential, which gives E = ½kA². At equilibrium x = 0, so U = 0 and all the energy is kinetic, which is why the speed is greatest there. For a horizontal spring, equilibrium is also where the spring is relaxed. A hanging spring is still stretched by d = mg/k at equilibrium, but ½kx² measured from that point counts the spring and gravitational energy together correctly. Everywhere in between the energy is shared, with U = ½kx² and K = E - U. If you know E and x, you can find the speed anywhere.

Squares and square roots decide most answers

The exam rewards knowing how each quantity scales. Period goes as √m, √L, 1/√k and 1/√g, so a factor of 4 in any of these changes T by a factor of 2. Energy goes as A², so doubling the amplitude quadruples the energy. Maximum speed and maximum acceleration both go as A, so doubling A doubles each one. Many wrong answer choices are built by applying a linear factor where a square or square root belongs, so check which power you are using before you commit.

Study notes

7 topics. Each one opens with its key idea, then the detail you need to use it.

1. Restoring force, equilibrium and turning points

Key idea: At the turning points v = 0 and |a| is maximum; at equilibrium a = 0 and speed is maximum.

Equilibrium is the position where the net force on the object is zero. Displacement x is measured from there, not from the end of the spring or the ceiling. The amplitude A is the largest displacement the object reaches. When you pull a block 0.08 m from equilibrium and let go, the amplitude is 0.08 m.

The spring force is F = -kx, so the acceleration is a = -(k/m)x. Follow the block through one cycle. At x = +A the force is largest and points back toward the center, so the acceleration is at its maximum while the velocity is zero. That is a turning point. As the block moves inward, the force shrinks but keeps speeding the block up. At x = 0 the force is zero, so the acceleration is zero, but the speed is at its maximum. Past equilibrium the force reverses and slows the block down until it stops at x = -A, the other turning point.

Students often assume that zero velocity means zero acceleration. At a turning point the opposite is true, because the block has stopped but the force on it is at its largest. Equilibrium is the reverse case: the speed is greatest and the acceleration is zero. Keep these two snapshots in mind and you can answer most "where is the object when..." questions without any algebra.

2. Period, frequency and angular frequency

Key idea: T = 1/f and ω = 2πf; √(k/m) gives ω in rad/s, not f in hertz.

Three quantities describe how fast an oscillator repeats, and the exam checks that you can switch between them. The period T is the time for one complete cycle, out and back, measured in seconds. The frequency f is the number of cycles per second, measured in hertz, and f = 1/T. The angular frequency ω is measured in radians per second, and ω = 2πf = 2π/T.

For a mass on a spring, ω = √(k/m). That number is not the frequency in hertz. You still have to divide by 2π to get f, or use T = 2π/ω to get the period. Mixing these up is a common way to land on a wrong answer that looks reasonable.

You also need to read motion equations. If a mass moves according to x(t) = 0.4 cos(5t), the number in front of the cosine is the amplitude, 0.4 m. The number multiplying t is ω, 5 rad/s. The period is then 2π/5, which is about 1.26 s. The equation sheet writes the same idea as x = A cos(2πft), so in that form the number multiplying t is 2πf. Spot which form you are given before you pull out a value.

A cosine starts at its maximum, so x = A cos(ωt) describes a mass released from rest at x = A at t = 0.

3. The mass-spring period and the spring constant

Key idea: T = 2π√(m/k): period grows with √m, shrinks with √k, and ignores amplitude and g.

The period of a mass on a spring is T = 2π√(m/k). The spring constant k measures stiffness in newtons per meter, so a spring with k = 100 N/m needs 100 N to stretch it 1 m. For m = 0.4 kg and k = 100 N/m, T = 2π√(0.004), which is about 0.40 s.

The formula explains the physics. More mass means more inertia, so the same force produces less acceleration and each cycle takes longer. A larger k means a bigger restoring force at every displacement, so the mass is pushed back sooner and the period shrinks. Because only the ratio m/k matters, quadrupling both the mass and the spring constant leaves the period exactly the same.

Ratio problems are faster than plugging in numbers. Compare two springs with the same mass, k1 = 100 N/m and k2 = 400 N/m. Since T goes as 1/√k, the first period is √4 = 2 times the second.

Two things are missing from this formula. Amplitude is missing, for the reason given in the first big idea. Gravity is missing too, so a mass-spring system has the same period on the Moon as on Earth. Of the two oscillators in this unit, only the pendulum responds to g.

4. Effective spring constant and the vertical spring

Key idea: Parallel springs add (stiffer); series springs combine as reciprocals (softer); gravity shifts a vertical spring's equilibrium but not its period.

When springs are combined, replace them with one spring that has an effective spring constant. Two springs side by side (in parallel) share the load, so the block feels both forces and k_eff = k1 + k2. Two identical springs in parallel give 2k, which cuts the period by a factor of √2. Two springs end to end (in series) each stretch, so the combination is softer and 1/k_eff = 1/k1 + 1/k2. Two identical springs in series give k/2, which raises the period by a factor of √2.

A vertical spring seems harder but behaves the same way. Hanging a mass stretches the spring by a distance d until the spring force balances the weight, so kd = mg. That stretched position is the new equilibrium. Measured from it, the net force is still -kx, because gravity only shifts the center point. The period is still 2π√(m/k), just as it is on a table.

The equilibrium condition gives a useful shortcut. Since m/k = d/g, the period is also T = 2π√(d/g). A mass that stretches its spring 0.10 m when it hangs at rest will oscillate with T = 2π√(0.01), which is about 0.63 s, no matter what the mass or k is. You can also use the stretch to measure k directly, with k = mg/d.

5. The simple pendulum: why mass cancels and g matters

Key idea: T = 2π√(L/g): independent of mass and of small amplitudes; longer for longer strings and weaker gravity.

A simple pendulum is a small mass on a light string of length L. When it is pulled aside by an angle θ, the part of gravity along its path is mg sin θ, and this is the restoring force. For small angles, roughly under 15 degrees, sin θ is close to x/L, where x is the distance along the arc. The restoring force becomes about -(mg/L)x. That has the same form as -kx, with mg/L playing the role of k.

Put that into the spring formula and you get T = 2π√(m / (mg/L)) = 2π√(L/g). The mass cancels. A heavier bob feels a bigger pull from gravity, but it also has more inertia to resist that pull, and the two effects match exactly. Two pendulums of the same length swing with the same period whatever their masses.

Length and gravity do matter. A 1.0 m pendulum with g = 10 m/s² has T = 2π√(0.1), which is about 2.0 s. Doubling the length multiplies the period by √2, about 1.41, and you must quadruple the length to double the period. A weaker g means a weaker restoring force and a slower swing. A clock with a 2.0 s period on Earth (g = 10) would have a period of 2.0 × √(10/4), about 3.16 s, on a planet where g = 4.0 m/s². An elevator accelerating upward raises the effective g and shortens the period.

6. Energy partition across the cycle

Key idea: E = ½kA² is constant; U = ½kx² and K = E - U, so KE = PE at x = A/√2, not A/2.

Energy partition means how a fixed total energy is split between kinetic and potential energy at each point in the cycle. For a spring, the total is E = ½kA². A 0.2 kg mass on a 50 N/m spring released from 0.08 m has E = ½(50)(0.08)² = 0.16 J, and the mass does not affect that total. Working backward, if a 50 N/m spring system has 25 J of energy, its amplitude is √(2E/k) = √1 = 1.0 m.

At any position x the potential energy is U = ½kx², and the kinetic energy is whatever is left, K = ½k(A² - x²). At x = A/2 the potential energy is only one quarter of the total, because U depends on x squared. The other three quarters are kinetic. So the halfway point in distance is not where the energy is split evenly. Kinetic and potential energy are equal when x² = A²/2, which is at x = A/√2, about 0.71A.

The A² dependence also controls amplitude questions. Doubling the amplitude quadruples the total energy, and tripling it multiplies the energy by nine. For a pendulum the same pattern holds with gravitational potential energy mgh. The energy is all potential at the highest points of the swing and all kinetic at the bottom.

7. Maximum velocity, maximum acceleration and graphs

Key idea: v_max = Aω at equilibrium, a_max = Aω² at the turning points, and the a-t graph is the flipped x-t graph.

You can find the top speed with energy. At equilibrium all of ½kA² becomes ½mv², so v_max = A√(k/m) = Aω. Take a 0.5 kg mass on a 50 N/m spring with A = 0.2 m. Then ω = √100 = 10 rad/s and v_max = 2.0 m/s. Maximum acceleration comes from Newton's second law at the turning point: a_max = kA/m = Aω². For the same system that is 20 m/s².

Both maxima are proportional to A, so doubling the amplitude doubles each one. Both also grow with ω, which is why stiffer springs give faster motion. Two systems with the same mass and amplitude, one with k = 100 N/m and one with k = 400 N/m, differ in ω by a factor of 2. So the stiffer one has twice the maximum speed and half the period.

On graphs, position, velocity and acceleration are all sine or cosine curves with the same period, but their peaks are shifted. Velocity is zero wherever the position graph peaks, and velocity is greatest where position crosses zero. Acceleration is always the mirror image of position, because a = -ω²x. When x is at its positive maximum, a is at its negative maximum. If you are given an x-t graph, the slope at any point gives the velocity, and that is how many graph-matching questions are solved.

Common mistakes

Drawn from the wrong answers students actually pick on these questions.

Choosing "the heavier pendulum has a shorter period because gravity pulls harder on it," or the reverse, "the lighter one is faster because it has less inertia."

Each answer looks at only half of the physics. A heavier bob does feel more gravitational force, but it also has proportionally more inertia, so its acceleration at any angle is unchanged. The mass cancels, and T = 2π√(L/g) contains no m. Equal lengths give equal periods.

Treating the period as if it were proportional to length, so doubling L gives 2T, or deciding the period does not change at all.

Length sits under a square root, so doubling L multiplies T by √2, about 1.41. Getting 2T requires four times the length, and getting T/2 requires one quarter of the length. The same square-root rule applies to m and k in the spring formula.

Saying that doubling the amplitude doubles the energy, or raises it by √2, or leaves it the same because "energy depends only on k."

E = ½kA², so the energy goes as the amplitude squared. Doubling A quadruples E. The period is the quantity that ignores amplitude, so do not mix up "amplitude does not change T" with "amplitude does not change E."

Getting the effect of gravity backwards, so you pick a shorter pendulum period on a planet with weaker g, or keep the Earth value because "the pendulum hasn't changed."

T goes as 1/√g, so weaker gravity means a weaker restoring force and a slower swing. Going from g = 10 to g = 4 multiplies T by √(10/4), about 1.58. A mass on a spring would keep its period, because g is not in T = 2π√(m/k).

Mixing up period, frequency and angular frequency, for example calling √(k/m) the frequency in hertz or reporting f when the question asks for T.

√(k/m) is ω in rad/s. Convert with f = ω/2π and T = 1/f = 2π/ω. Before you choose an answer, check its units and its size against the given numbers. With k = 100 N/m and m = 0.4 kg, ω = √250, about 15.8 rad/s, so T = 2π/15.8, about 0.40 s, which is well under 1 s. A reciprocal of the right answer is a common distractor.

Assuming any change to m or k must change the period, so you pick a new value when the mass and spring constant are both quadrupled.

Only the ratio m/k sets the period. Multiply both by the same factor and the ratio, and so the period, stays the same. Always write the new period as a ratio of the old one before you reach for numbers.

How this unit shows up on the exam

This unit is a small slice of the exam, around 5-8% of the score. Its questions are predictable, so the points are cheap to earn if you prepare. Multiple-choice stems usually change one thing and ask what happens: "The length is doubled," "The pendulum is taken to a planet where g is 4.0 m/s²," "The amplitude is doubled," or "Two pendulums have the same length but different masses." The answer choices are almost always the same factors, 1, √2, 2 and 4, plus their reciprocals, so the question is really testing whether you know which power applies. Set up the ratio T_new/T_old before you calculate anything.

Other common stems ask where in the cycle a quantity is largest. Expect questions such as "At which position is the potential energy maximum?" or "Where is the kinetic energy equal to the potential energy?" You may also be asked to read amplitude, ω and period from an equation such as x = 0.4 cos(5t), or to match x-t, v-t and a-t graphs. The equation sheet gives T = 2π/ω = 1/f, T = 2π√(m/k), T = 2π√(L/g), x = A cos(2πft) and U = ½kx², but it does not tell you which quantities each formula leaves out. That is what examiners test.

On free-response questions, oscillators often appear in experimental design and analysis. A typical task is to find g with a pendulum or k with a spring. Readers reward timing many cycles and dividing, which cuts reaction-time error, and keeping the angle small. They also reward linearizing the data. Plot T² against L and the slope is 4π²/g, or plot T² against m and the slope is 4π²/k. When a question asks you to justify a claim, name the mechanism, for example "the larger mass has more weight but also more inertia, so its acceleration is unchanged." A bare formula earns less credit than that explanation.

How the exam actually asks it

Real items from the AP Physics 1 bank, easier first. The answer is marked, and every wrong choice is explained — because knowing why a distractor is tempting is most of the work.

Worked example 1Easier
A simple pendulum of length L = 1.0 m swings with a small amplitude. What is its period? (Use g = 10 m/s^2, pi = 3.14.)
  1. A2.0 sCorrect
  2. B6.28 s
  3. C0.63 s
  4. D1.0 s

Why A is right

T = 2*pi*sqrt(L/g) = 2*3.14*sqrt(1.0/10) = 6.28*sqrt(0.1) = 6.28*0.316 = 1.99 s ≈ 2.0 s. The result follows from the oscillation relationship or restoring-force model in the problem, so the period or frequency comes from that setup.
Why the other 3 choices miss
B
Incorrect because 6.28 s = 2*pi is the period of a pendulum of length 10 m, not 1 m.
C
Incorrect because 0.63 s = 1/(2*pi*sqrt(g/L)) is the frequency in Hz, not the period; the period is the reciprocal of this.
D
Incorrect because T = 1.0 s would require sqrt(L/g) = 0.159, meaning L/g = 0.0253, or L ≈ 0.25 m — a pendulum four times shorter.
Worked example 2Easier
Two pendulums have the same length but different masses. Which statement correctly describes their periods?
  1. AThe heavier pendulum has a shorter period because it has more gravitational force.
  2. BThe lighter pendulum has a shorter period because it has less inertia.
  3. CBoth pendulums have the same period because T depends on L and g, not mass.Correct
  4. DThe periods are different but the amplitudes are the same.

Why C is right

The period of a simple pendulum is T = 2*pi*sqrt(L/g). This formula contains no mass term. Physically, a heavier mass experiences more gravitational force (tending to increase frequency) but also more inertia (tending to decrease frequency). These effects exactly cancel, leaving period independent of mass.
Why the other 3 choices miss
A
Incorrect because while gravity increases with mass (F = mg), so does inertia (ma = mg*sin(theta)); the mass cancels and the period is unchanged.
B
Incorrect because lower inertia alone would mean faster oscillation, but lower mass also means less gravitational restoring force; again, these cancel.
D
Incorrect because the period being the same is the correct answer; the irrelevant mention of amplitude further confuses the issue.
Worked example 3Easier
In a mass-spring system, at which position(s) does the mass have maximum potential energy?
  1. AMaximum PE is constant and the same everywhere
  2. BAt the equilibrium position
  3. CAt both extremes of motion (x = +A and x = -A)Correct
  4. DWhen the mass passes through the midpoint between equilibrium and maximum displacement

Why C is right

Spring potential energy U = (1/2)*k*x^2 is maximum when |x| is maximum, i.e., at the amplitude x = +A or x = -A. At these turning points, the mass momentarily stops (v = 0) and all energy is potential.
Why the other 3 choices miss
A
Incorrect because PE varies as (1/2)*k*x^2, which changes with position; it is not constant throughout the motion.
B
Incorrect because at equilibrium (x = 0), the spring is uncompressed and U = 0; this is where KE is maximum, not PE.
D
Incorrect because U increases continuously as x increases from 0 to A; the midpoint has intermediate PE, not maximum PE.
Worked example 4Easier
A mass on a spring () is displaced from equilibrium and released. What is the total mechanical energy of the system?
  1. A
  2. B
  3. C
  4. DCorrect

Why D is right

At maximum displacement (amplitude), all energy is spring PE: . The result follows from the oscillation relationship or restoring-force model in the problem, so the period or frequency comes from that setup.
Why the other 3 choices miss
A
Incorrect because — the amplitude is , so , and , not .
B
Incorrect because with , which is times the actual amplitude.
C
Incorrect because would result from omitting the factor in the PE formula, computing instead of .

Can you do all of these?

Tick what you can do without looking. Anything left unticked is where to go back to.

0 of 10 ticked

Ready to test yourself?

Open practice pulls from the 22 free questions in this unit. The other 67 come with the one-time AP purchase, which unlocks every AP course.

Official topic list

The official course framework breaks this unit into 4 numbered topics.

  1. 7.1Defining Simple Harmonic Motion (SHM)
  2. 7.2Frequency and Period of SHM
  3. 7.3Representing and Analyzing SHM
  4. 7.4Energy of Simple Harmonic Oscillators

Key terms in Oscillations

Ordered by how often our reviewed questions test them. Open any term to see the questions that use it.

The rest of AP Physics 1

Every unit with its share of the exam. You are on Unit 6.

  1. 1Kinematics12.5% of exam
  2. 2Force and Translational Dynamics20.5% of exam
  3. 3Work, Energy, and Power20.5% of exam
  4. 4Linear Momentum12.5% of exam
  5. 5Torque and Rotational Dynamics; Energy and Momentum of Rotating Systems19% of exam
  6. 6Oscillations6.5% of exam
  7. 7Fluids12.5% of exam