Skip to content
AP Physics 1 · Force and Translational Dynamics

Static equilibrium

Static equilibrium appears in 7 reviewed AP Physics 1 questions and sits in Force and Translational Dynamics. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How Static equilibrium is tested

Example 1Medium
A 10 kg sign hangs from two cables attached to the ceiling, each making a 30-degree angle with the vertical. Which condition must be satisfied for the sign to remain in static equilibrium?
  1. ABoth the sum of forces and the sum of torques must equal the weight of the sign.
  2. BThe sum of torques is zero but the net force can be nonzero as long as objects are rigid.
  3. CThe sum of all forces is zero AND the sum of all torques about any axis is zero.Correct
  4. DThe sum of forces is zero but torques do not matter for static objects.

Why C is right

For an object to be in complete static equilibrium, two independent conditions must hold: (1) the net force must be zero (translational equilibrium: sum F = 0), and (2) the net torque about any axis must be zero (rotational equilibrium: sum tau = 0). Both conditions are necessary and sufficient.
Why the other 3 choices miss
A
Incorrect because the sums must equal zero, not the weight; a net force equal to the weight would imply the sign accelerates.
B
Incorrect because a nonzero net force would cause translational (linear) acceleration, violating the static condition even for rigid bodies.
D
Incorrect because torque equilibrium is essential for preventing rotation; a net torque would cause the sign to spin even if forces balance.
Example 2Harder
A 6 kg block is suspended by two ropes: one vertical and one horizontal. The horizontal rope pulls the block toward the wall. What is the tension in the horizontal rope if the vertical rope makes a 37-degree angle with the vertical? (g = 10 m/s^2, tan 37° = 0.75)
  1. A60 N
  2. B45 NCorrect
  3. C75 N
  4. D80 N

Why B is right

The block is in equilibrium. Vertical rope tension: T_v * cos(37°) = mg = 60 N. No wait — one rope is vertical, one is horizontal. If the vertical rope makes 37° with the vertical, it's an angled rope, not truly vertical. Assuming the problem means: angled rope at 37° from vertical, and horizontal rope. Vertical: T_angled * cos(37°) = mg = 60. T_angled = 60/cos(37°) = 60/0.8 = 75 N. Horizontal: T_horizontal = T_angled * sin(37°) = 75*0.6 = 45 N.
Why the other 3 choices miss
A
Incorrect because 60 N is the weight of the block, not the horizontal tension.
C
Incorrect because 75 N is the tension in the angled rope, not the horizontal rope.
D
Incorrect because 80 N significantly overestimates the horizontal tension required.
Example 3Harder
A 3 m long uniform rod weighing 60 N is balanced on a pivot placed 1 m from one end. To keep it in equilibrium, what force F must be applied downward at the short end?
  1. A20 N
  2. B30 NCorrect
  3. C60 N
  4. D40 N

Why B is right

Place the pivot 1 m from the short end. The rod's center of mass is at 1.5 m from the short end, which is 0.5 m from the pivot on the long side. The weight produces a torque about the pivot of 60 N x 0.5 m = 30 N·m. The applied downward force F at the short end is 1 m from the pivot on the opposite side, producing the balancing torque F x 1 m. For equilibrium: F x 1 = 30, so F = 30 N.
Why the other 2 choices miss
A
Incorrect because 20 N would not balance the torque from the weight; the moment arm calculation gives F = 30 N.
C
Incorrect because 60 N equals the total weight of the rod and does not account for the moment arms in the torque equation.

Studied alongside

Other concepts from Force and Translational Dynamics.