A 15 kg block on a frictionless incline of 25 degrees is connected by a string over a pulley to a 5 kg hanging mass. Does the system accelerate? In which direction? (g = 10 m/s^2, sin 25° ≈ 0.42)
- ANo acceleration; the incline gravity component and the hanging weight exactly balance, so the system stays at rest.
- BThe block slides down because its gravity component along the incline exceeds the hanging weight.Correct
- CThe hanging mass rises because the heavier block always wins on a frictionless incline.
- DThe block slides up the incline because the tension from the hanging mass pulls it upward along the surface.
Why B is right
Force pulling block down incline: m_block * g * sin(25°) = 15*10*0.42 = 63 N. Force pulling block up incline (from hanging mass): m_hang * g = 5*10 = 50 N. Net: 63 - 50 = 13 N down the incline. System accelerates with block moving down.
Why the other 3 choices miss
- A
- Incorrect because the incline component (63 N) differs from the hanging weight (50 N); they do not balance, so the system accelerates.
- C
- Incorrect because a heavier block does not always pull the hanging mass up; the relevant force is the incline component (63 N), which here drives the block down.
- D
- Incorrect because the hanging weight (50 N) is less than the incline gravity component (63 N), so the block moves down, not up.
A 6 kg block is suspended by two ropes: one vertical and one horizontal. The horizontal rope pulls the block toward the wall. What is the tension in the horizontal rope if the vertical rope makes a 37-degree angle with the vertical? (g = 10 m/s^2, tan 37° = 0.75)
- A60 N
- B45 NCorrect
- C75 N
- D80 N
Why B is right
The block is in equilibrium. Vertical rope tension: T_v * cos(37°) = mg = 60 N. No wait — one rope is vertical, one is horizontal. If the vertical rope makes 37° with the vertical, it's an angled rope, not truly vertical. Assuming the problem means: angled rope at 37° from vertical, and horizontal rope. Vertical: T_angled * cos(37°) = mg = 60. T_angled = 60/cos(37°) = 60/0.8 = 75 N. Horizontal: T_horizontal = T_angled * sin(37°) = 75*0.6 = 45 N.
Why the other 3 choices miss
- A
- Incorrect because 60 N is the weight of the block, not the horizontal tension.
- C
- Incorrect because 75 N is the tension in the angled rope, not the horizontal rope.
- D
- Incorrect because 80 N significantly overestimates the horizontal tension required.
A 0.5 kg ball on a 1.5 m string swings as a conical pendulum, making a 30-degree angle with the vertical. What is the tension in the string? (Use g = 10 m/s^2.)
- A5.8 NCorrect
- B10.0 N
- C5.0 N
- D11.5 N
Why A is right
The vertical component of tension supports the weight: T*cos(30) = mg. So T = mg/cos(30) = (0.5)(10)/0.866 = 5/0.866 ≈ 5.77 ≈ 5.8 N. The result follows from the rotational relationship given in the problem, usually through conservation of angular momentum or torque balance.
Why the other 3 choices miss
- B
- Incorrect. This might come from T = mg/cos(60) = 5/0.5 = 10, using 60 degrees instead of 30 degrees.
- C
- Incorrect. This is simply mg = 0.5*10 = 5 N, which would be the tension only if the string were vertical.
- D
- Incorrect. This could result from T = mg/sin(30) = 5/0.5 = 10, then adding some correction, or from a different angle error.