Skip to content
AP Physics 1 · Force and Translational Dynamics

Kinetic friction

Kinetic friction appears in 16 reviewed AP Physics 1 questions and sits in Force and Translational Dynamics. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How Kinetic friction is tested

Example 1Harder
A car skids to a stop on a dry road with mu_k = 0.7. How far does it travel before stopping if it was initially moving at 28 m/s? (g = 10 m/s^2)
  1. A80 m
  2. B57.1 m
  3. C28 m
  4. D56 mCorrect

Why D is right

The only horizontal force on the skidding car is kinetic friction, f = mu_k*m*g. By Newton's second law the car slows at a = f/m = mu_k*g = 0.7 * 10 = 7 m/s^2. With final speed v = 0, v^2 = v_0^2 - 2*a*d gives 0 = 28^2 - 2*7*d, so 784 = 14*d and d = 56 m. The answer is D.
Why the other 3 choices miss
A
This comes from using a deceleration of 4.9 m/s^2, which is g/2 rather than mu_k*g: 784/(2*4.9) = 80 m.
B
This comes from using g = 9.8 m/s^2 when the problem gives g = 10 m/s^2: a = 6.86 m/s^2 and 784/13.72 = 57.1 m.
C
This comes from doubling the deceleration to 14 m/s^2 and then using it in d = v_0^2/(2a): 784/28 = 28 m. That halves the stopping distance.
Example 2Medium
A student plots friction force (y-axis) vs. normal force (x-axis) for a block being pulled at constant speed. The graph is a straight line through the origin. What is the significance of the slope?
  1. AThe slope equals the block's acceleration as the applied force increases.
  2. BThe slope equals the mass of the block being pulled across the surface.
  3. CThe slope equals the gravitational field strength g acting on the block.
  4. DThe slope equals the coefficient of kinetic friction for the surfaces.Correct

Why D is right

At constant speed, applied force equals kinetic friction: f_k = mu_k * N. This is a linear relationship between f_k and N with slope mu_k. A graph of friction force vs. normal force is a straight line through the origin with slope = mu_k.
Why the other 3 choices miss
A
Incorrect because the block moves at constant speed, so its acceleration is zero; the slope of this friction-versus-normal-force graph is the dimensionless coefficient mu_k, not an acceleration.
B
Incorrect because the slope is the ratio of friction to normal force, which is dimensionless and equals mu_k; mass has units of kilograms and does not appear as the slope of this graph.
C
Incorrect because g has units of m/s^2 and describes gravitational field strength; the slope here is the dimensionless friction-to-normal-force ratio mu_k, not g.

Studied alongside

Other concepts from Force and Translational Dynamics.