A 5 kg block is on a frictionless 45-degree incline. A string attached to the block runs up the incline and over a frictionless pulley to a hanging 3 kg mass. Does the block slide up or down the incline, and what is the magnitude of the acceleration? (Use g = 10 m/s^2, sin 45 = cos 45 = 0.707.)
- AUp the incline at 6.8 m/s^2
- BDown the incline at 0.72 m/s^2Correct
- CDown the incline at 6.8 m/s^2
- DUp the incline at 0.72 m/s^2
Why B is right
Force pulling block down the incline: m1*g*sin(45) = 5*10*0.707 = 35.35 N. Force pulling block up (weight of hanging mass): m2*g = 3*10 = 30 N. Since 35.35 > 30, the block slides down. Net force = 35.35 - 30 = 5.35 N. Acceleration: a = 5.35/(5+3) = 5.35/8 ≈ 0.67 m/s^2 ≈ 0.72 m/s^2 (with more precise sin 45).
Why the other 3 choices miss
- A
- Incorrect. Both the direction and magnitude are wrong.
- C
- Incorrect. This is too large and might come from dividing the net force by only one of the masses instead of the total system mass.
- D
- Incorrect. The block slides down, not up, because the component of the 5 kg block's weight along the incline exceeds the 3 kg weight.
A 2 kg block is placed on a frictionless incline that makes a 30-degree angle with the horizontal. What is the acceleration of the block down the incline? (Use g = 10 m/s^2, sin 30 = 0.5.)
- A5.0 m/s^2Correct
- B2.5 m/s^2
- C8.7 m/s^2
- D10 m/s^2
Why A is right
On a frictionless incline, the acceleration is a = g*sin(theta) = 10 * sin(30) = 10 * 0.5 = 5.0 m/s^2. The mass cancels out. The result follows from the force relationship given in the problem, so the net force points directly to the correct response.
Why the other 3 choices miss
- B
- Incorrect. This uses g*sin(theta)/2, incorrectly dividing by an extra factor of 2.
- C
- Incorrect. This uses g*cos(30) ≈ 10*0.87, confusing the sine and cosine components on an incline.
- D
- Incorrect. This uses the full gravitational acceleration g, which would only apply to free fall, not motion along an incline.
A ramp is used as a simple machine to slide a 600 N box onto a truck 1.5 m high. The ramp is 3 m long. What is the theoretical minimum input force along the ramp?
- A150 N
- B300 NCorrect
- C100 N
- D200 N
Why B is right
Mechanical advantage of ramp = length/height = 3/1.5 = 2. Minimum force = Load/MA = 600/2 = 300 N. Alternatively: F*L = W*h → F*3 = 600*1.5 → F = 900/3 = 300 N. The result follows from conservation of energy or the work-energy relationship, so the change in kinetic or potential energy sets the answer.
Why the other 3 choices miss
- A
- Incorrect because 150 N corresponds to MA = 4, requiring a 6 m ramp.
- C
- Incorrect because 100 N corresponds to MA = 6, which would require a 9 m long ramp for 1.5 m height.
- D
- Incorrect because 200 N corresponds to MA = 3, requiring a 4.5 m ramp.