Skip to content
AP Physics 1 · Force and Translational Dynamics

Deceleration

Deceleration appears in 7 reviewed AP Physics 1 questions and sits in Force and Translational Dynamics. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How Deceleration is tested

Example 1Harder
A car skids to a stop on a dry road with mu_k = 0.7. How far does it travel before stopping if it was initially moving at 28 m/s? (g = 10 m/s^2)
  1. A80 m
  2. B57.1 m
  3. C28 m
  4. D56 mCorrect

Why D is right

The only horizontal force on the skidding car is kinetic friction, f = mu_k*m*g. By Newton's second law the car slows at a = f/m = mu_k*g = 0.7 * 10 = 7 m/s^2. With final speed v = 0, v^2 = v_0^2 - 2*a*d gives 0 = 28^2 - 2*7*d, so 784 = 14*d and d = 56 m. The answer is D.
Why the other 3 choices miss
A
This comes from using a deceleration of 4.9 m/s^2, which is g/2 rather than mu_k*g: 784/(2*4.9) = 80 m.
B
This comes from using g = 9.8 m/s^2 when the problem gives g = 10 m/s^2: a = 6.86 m/s^2 and 784/13.72 = 57.1 m.
C
This comes from doubling the deceleration to 14 m/s^2 and then using it in d = v_0^2/(2a): 784/28 = 28 m. That halves the stopping distance.
Example 2Medium
A spring scale is attached to the ceiling of an elevator and holds a 5 kg mass. If the elevator decelerates while moving upward at 3 m/s^2, what does the spring scale read? Use g = 10 m/s^2.
  1. A50 N
  2. B65 N
  3. C35 NCorrect
  4. D15 N

Why C is right

When the elevator decelerates while moving upward, the acceleration is directed downward at 3 m/s^2. The spring scale reads the tension T. Newton's second law: T - mg = m(-a) where a = 3 m/s^2 downward. T = m(g - a) = 5(10 - 3) = 5(7) = 35 N.
Why the other 3 choices miss
A
Incorrect. This is the weight mg = 50 N, which the scale would read only if the elevator were stationary or moving at constant velocity.
B
Incorrect. This is m(g + a) = 5(13) = 65 N, which would be the reading if the elevator were accelerating upward, not decelerating.
D
Incorrect. This uses m*a = 5(3) = 15 N, which is just the net force component, not the total spring scale reading.

Studied alongside

Other concepts from Force and Translational Dynamics.