Skip to content
ACT · Science

Specific heat

Specific heat appears in 3 reviewed ACT questions and sits in Science. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How Specific heat is tested

Example 1Easier
A student measured the specific heat capacity of three unknown metals by heating each to 100°C and then dropping it into 200 mL of water at 20°C. The student recorded the final water temperature. Metal | Mass (g) | Initial Temp (°C) | Final Water Temp (°C) | Specific Heat (J/g°C) Metal A | 50 | 100 | 22.6 | 0.45 Metal B | 50 | 100 | 24.1 | 0.90 Metal C | 50 | 100 | 25.8 | 1.38 Based on the data, which metal transferred the most heat energy to the water?
  1. AMetal CCorrect
  2. BAll metals transferred equal heat energy.
  3. CMetal A
  4. DMetal B

Why A is right

The heat absorbed by the water equals m_water x c_water x (T_final - T_initial), so the metal that raised the water temperature the most transferred the most heat to it. Metal C produced the highest final water temperature (25.8°C, a 5.8°C rise) versus Metal B (24.1°C, 4.1°C) and Metal A (22.6°C, 2.6°C). Therefore Metal C transferred the most heat energy to the water, making choice A correct.
Why the other 3 choices miss
B
Incorrect because the different final water temperatures (22.6, 24.1, 25.8°C) clearly demonstrate that the metals transferred different amounts of heat.
C
Incorrect because Metal A produced the smallest water temperature increase (only 2.6°C), indicating it transferred the least heat.
D
Incorrect because Metal B produced an intermediate water temperature increase (4.1°C), less than Metal C's 5.8°C increase.
Example 2Easier
Experiment 4: A student measured the cooling rate of three liquids (water, oil, and salt water) after heating all three to 80°C and recording temperature every 5 minutes in a room at 22°C. Time (min) | Water (°C) | Oil (°C) | Salt water (°C) 0 | 80 | 80 | 80 5 | 72 | 64 | 71 10 | 65 | 52 | 63 15 | 59 | 42 | 57 20 | 54 | 35 | 52 30 | 46 | 28 | 44 60 | 34 | 24 | 32 Which liquid cools most rapidly?
  1. ASalt water
  2. BAll three cool at identical rates.
  3. CWater
  4. DOilCorrect

Why D is right

After 30 minutes, oil has cooled to 28°C (only 6°C above room temperature), while water is at 46°C and salt water at 44°C. Oil reaches near-room temperature fastest because it has a lower specific heat capacity than water or salt water, requiring less energy to be lost per degree of temperature drop.
Why the other 3 choices miss
A
Incorrect because salt water (32°C at 60 min) cools only slightly faster than pure water (34°C at 60 min) and much slower than oil (24°C at 60 min).
B
Incorrect because the data clearly show oil cooling much faster than either water or salt water at every time point.
C
Incorrect because water remains at 34°C after 60 minutes, well above room temperature, while oil reached near-room temperature (24°C) by 60 minutes.
Example 3Harder
Students conducted a calorimetry experiment to determine the specific heat capacity of three unknown metals. Each 50 g metal sample was heated to 100°C and then dropped into 200 g of water at 20°C in an insulated calorimeter. Final temperature of water recorded. Results: Metal X: final temp = 24.8°C. Metal Y: final temp = 28.3°C. Metal Z: final temp = 22.1°C. Specific heat of water = 4.18 J/(g·°C). Heat gained by water for Metal Y = mass × Cp,water × ΔT = 200 × 4.18 × (28.3 − 20) = 6,939 J. Assuming no heat loss, what is the specific heat capacity of Metal Y?
  1. A0.190 J/(g·°C)
  2. B1.89 J/(g·°C)Correct
  3. C3.47 J/(g·°C)
  4. D0.347 J/(g·°C)

Why B is right

By conservation of energy, heat lost by the metal equals heat gained by the water: Q = 6,939 J. Metal Y cools from 100°C to the final temperature 28.3°C, so its temperature change is ΔT = 100 − 28.3 = 71.7°C. The metal mass is 50 g. Specific heat capacity = Q / (m × ΔT) = 6,939 / (50 × 71.7) = 6,939 / 3,585 ≈ 1.89 J/(g·°C), which is choice B.
Why the other 3 choices miss
A
Incorrect because 0.190 J/(g·°C) corresponds to gold or lead, which would cause a much smaller temperature change in the water.
C
Incorrect because 3.47 J/(g·°C) is higher than most metals and would require a much larger temperature rise in the water.
D
Incorrect because 0.347 J/(g·°C) is close to copper's specific heat, which would result in a smaller final water temperature than observed.

Studied alongside

Other concepts from Science.