Experiment 2: A student measured the relationship between the length of a vibrating string and the frequency of sound produced, keeping string tension and thickness constant.
String Length (cm) | Frequency Produced (Hz)
120 | 131
90 | 175
60 | 262
45 | 349
30 | 524
A musician wants a string to produce a frequency of 440 Hz (standard A note). Based on the pattern in the data, approximately what string length is needed?
- A37 cmCorrect
- B30 cm
- C45 cm
- D60 cm
Why A is right
The data follow an inverse relationship: frequency × length ≈ constant (120×131 = 15,720; 60×262 = 15,720; 30×524 = 15,720). For 440 Hz: length = 15,720 / 440 ≈ 35.7 cm ≈ 37 cm. The data and relationship in the passage point to this result more directly than the other choices.
Why the other 3 choices miss
- B
- Incorrect because 30 cm produces 524 Hz, which is higher than the desired 440 Hz.
- C
- Incorrect because 45 cm produces 349 Hz, which is lower than 440 Hz.
- D
- Incorrect because 60 cm produces 262 Hz, which is considerably lower than the desired 440 Hz.
Experiment 4: A physicist measured the speed of different balls after rolling down a frictionless ramp and hitting a pendulum (ballistic pendulum). The height the pendulum swings up indicates the ball's kinetic energy upon impact.
Ball | Mass (kg) | Speed at bottom (m/s) | Kinetic Energy (J)
1 | 0.1 | 4.0 | 0.80
2 | 0.2 | 4.0 | 1.60
3 | 0.4 | 4.0 | 3.20
4 | 0.1 | 8.0 | 3.20
5 | 0.1 | 12.0 | 7.20
Note: KE = ½mv²
Comparing Ball 3 and Ball 4, which have the same kinetic energy (3.20 J). Ball 3 has four times the mass of Ball 4, while Ball 4 has twice the speed. Which conclusion about the relationship between mass, speed, and kinetic energy is supported?
- AMass has no effect on kinetic energy whenever the speed of the ball is held constant.
- BDoubling speed increases kinetic energy by the same factor as quadrupling mass.Correct
- CDoubling speed has the same effect on kinetic energy as doubling mass.
- DIncreasing mass has a greater effect on kinetic energy per unit change than increasing speed does.
Why B is right
Ball 1 to Ball 2 (mass doubled, speed constant): KE doubles from 0.80 to 1.60 J. Ball 1 to Ball 4 (speed doubled, mass constant): KE quadruples from 0.80 to 3.20 J. Ball 1 to Ball 3 (mass quadrupled): KE quadruples from 0.80 to 3.20 J. So doubling speed = quadrupling mass in effect on KE, confirming KE ∝ v², not v.
Why the other 3 choices miss
- A
- Incorrect because comparing Ball 1 (0.1 kg, 0.80 J) to Ball 2 (0.2 kg, 1.60 J) at the same speed shows mass clearly affects kinetic energy.
- C
- Incorrect because doubling speed quadruples KE (0.80 → 3.20 J), while doubling mass only doubles KE (0.80 → 1.60 J). These effects are not equal.
- D
- Incorrect because it reverses the relationship: doubling mass only doubles KE (0.80 → 1.60 J), while doubling speed quadruples it (0.80 → 3.20 J), so speed has the greater effect because KE depends on v².
Experiment 5: A student tested the accuracy of a thermometer by placing it in water baths prepared at known temperatures and recording the thermometer reading.
Actual Temperature (°C) | Thermometer Reading (°C) | Error (°C)
0 | 1.2 | +1.2
20 | 21.0 | +1.0
40 | 40.6 | +0.6
60 | 60.2 | +0.2
80 | 80.0 | 0.0
100 | 99.9 | -0.1
Based on the data, which statement best describes the thermometer's accuracy?
- AThe thermometer is perfectly accurate at every temperature tested.
- BThe thermometer reads accurately at low temperatures but becomes inaccurate above 80°C.
- CThe thermometer overestimates temperature at low temperatures and becomes accurate near 80°C.Correct
- DThe thermometer consistently reads higher than the actual temperature at all of the tested values.
Why C is right
At low temperatures (0°C), the thermometer reads 1.2°C too high. The error decreases steadily with increasing temperature, reaching 0.0 at 80°C and -0.1 at 100°C. The thermometer overestimates at low temperatures and becomes increasingly accurate as temperature rises.
Why the other 3 choices miss
- A
- Incorrect because errors range from +1.2°C at 0°C to -0.1°C at 100°C, demonstrating the thermometer is not perfectly accurate across the range.
- B
- Incorrect because the thermometer is actually most accurate near 80–100°C; it is inaccurate at LOW temperatures, not above 80°C.
- D
- Incorrect because at 100°C the thermometer reads -0.1°C below actual — slightly underestimating — so it does not consistently read higher at all tested values.