Skip to content
ACT · Science

Reaction kinetics

Reaction kinetics appears in 8 reviewed ACT questions and sits in Science. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How Reaction kinetics is tested

Example 1Easier
Figure 1 describes a line graph showing the concentration of reactants and products over time during a chemical reaction that reaches equilibrium. The x-axis represents time (0–20 minutes) and the y-axis represents concentration (0–1.0 mol/L). Reactant A starts at 1.0 mol/L and decreases steeply for the first 8 minutes, then levels off at 0.4 mol/L. Product B starts at 0 and increases steeply for the first 8 minutes, then levels off at 0.6 mol/L. At what time does the reaction appear to reach equilibrium?
  1. A8 minutesCorrect
  2. B2 minutes
  3. C5 minutes
  4. D20 minutes

Why A is right

Equilibrium is reached when reactant and product concentrations stop changing. The graph description states that both curves level off at 8 minutes, indicating the net forward and reverse reaction rates have equalized.
Why the other 3 choices miss
B
Incorrect because at 2 minutes, the concentrations are still changing steeply — equilibrium has not been reached.
C
Incorrect because at 5 minutes, both curves are still changing; the steep portions of the curves have not yet leveled off.
D
Incorrect because 20 minutes is the end of the observation period, but the graph shows equilibrium was already established at 8 minutes, well before the end.
Example 2Harder
Experiment 5: A chemistry student investigated the relationship between reaction temperature and the rate constant (k) for a first-order reaction, using the Arrhenius equation. The student measured k at different temperatures: Temperature (K) | 1/T (K⁻¹) | Rate Constant k (s⁻¹) | ln(k) 300 | 0.00333 | 0.00230 | -6.07 310 | 0.00323 | 0.00480 | -5.34 320 | 0.00313 | 0.00950 | -4.66 330 | 0.00303 | 0.01810 | -4.01 340 | 0.00294 | 0.03300 | -3.41 A plot of ln(k) versus 1/T should be linear according to the Arrhenius equation. What is the slope of this line, and what does it represent?
  1. APositive slope; represents the frequency factor A.
  2. BNegative slope; represents -Ea/R, where Ea is the activation energy.Correct
  3. CZero slope; indicates temperature does not affect the rate constant.
  4. DPositive slope; indicates reaction accelerates with temperature.

Why B is right

From the data, as 1/T decreases (temperature increases), ln(k) increases. Therefore, plotting ln(k) vs. 1/T gives a negative slope. According to the Arrhenius equation ln(k) = -Ea/R × (1/T) + ln(A), the slope = -Ea/R, where Ea is activation energy and R is the gas constant.
Why the other 3 choices miss
A
Incorrect because a positive slope is wrong (the slope is negative), and the frequency factor A appears as the y-intercept, not the slope.
C
Incorrect because the data clearly show ln(k) changing with temperature, ruling out a zero slope.
D
Incorrect regarding the slope sign: as 1/T increases (temperature decreases), ln(k) decreases. The slope (rise/run) = Δln(k)/Δ(1/T) is negative, not positive.
Example 3Harder
A student measured the concentration of a reactant over time as it was converted to products: Time (min) | Reactant Concentration (mol/L) 0 | 1.000 5 | 0.756 10 | 0.571 15 | 0.432 20 | 0.326 30 | 0.186 40 | 0.106 Which type of reaction kinetics is most consistent with the data?
  1. AZero-order: concentration decreases linearly.
  2. BSecond-order: rate is proportional to the square of reactant concentration.
  3. CInstantaneous: all reactant is consumed in the first 5 minutes.
  4. DFirst-order: concentration decreases by a constant fraction per unit time.Correct

Why D is right

In a first-order reaction, the fraction remaining is constant per time interval. From 0 to 10 min: 0.571/1.000 = 0.571. From 10 to 20 min: 0.326/0.571 = 0.571. From 20 to 40 min: 0.106/0.326 = 0.325 = 0.571². The ratio per 10-minute interval is consistently ~0.571, confirming first-order kinetics.
Why the other 3 choices miss
A
Incorrect because in zero-order kinetics, concentration decreases by a fixed amount per unit time. The data show decreasing amounts of decrease per interval (0.244, 0.185, 0.140...), not a constant decrease.
B
Incorrect because second-order kinetics would show a plot of 1/[A] vs. time being linear; while plausible, the constant fractional decrease (first-order) is simpler and more directly confirmed by the data.
C
Incorrect because 0.756 mol/L remains after 5 minutes, meaning 75.6% of the reactant is still present — far from instantaneous consumption.

Studied alongside

Other concepts from Science.