Experiment 1: A biologist studied how competition affects plant growth. Sunflower seedlings were planted alone (monoculture) or together with grass (mixed culture) at various densities. Sunflower biomass was measured at 8 weeks.
Density (plants/m²) | Sunflower biomass alone (g) | Sunflower biomass with grass (g)
1 | 185 | 162
4 | 148 | 108
8 | 112 | 72
16 | 78 | 41
32 | 52 | 22
At the highest density tested (32 plants/m²), by approximately what percentage is sunflower biomass reduced when grown with grass compared to alone?
- A25%
- B75%
- C42%
- D58%Correct
Why D is right
Percentage reduction = (52 - 22) / 52 × 100 = 30/52 × 100 ≈ 57.7% ≈ 58%. Growing with grass reduces sunflower biomass by approximately 58% at the highest density. The data and relationship in the passage point to this result more directly than the other choices.
Why the other 3 choices miss
- A
- Incorrect because 25% reduction from 52g would give 39g, not 22g.
- B
- Incorrect because 75% reduction from 52g would give 13g, not 22g.
- C
- Incorrect because 42% reduction from 52g would give approximately 30g, not 22g.
Experiment 4: A student observed seed dispersal distances for four plant species by measuring where seeds fell after being released from the parent plant:
Plant Species | Dispersal Method | Mean Distance (m) | Maximum Distance (m)
Dandelion | Wind (pappus) | 8 | 35
Maple (samara) | Wind (spinning) | 15 | 60
Burr clover | Animal fur attachment | 45 | 180
Juniper | Animal ingestion/defecation | 320 | 2,100
A forest ecologist wants to predict which plant species will colonize a new habitat 200 m from the nearest population. Based on the data, which species could potentially colonize?
- AJuniper only, since its mean dispersal distance exceeds 200 mCorrect
- BBurr clover only, since its maximum distance reaches 180 m
- CDandelion and maple only
- DBurr clover and juniper, since both have maximum distances that reach 200 m or beyond
Why A is right
At 200 m, we need species that can disperse seeds that far. Dandelion max = 35 m (no). Maple max = 60 m (no). Burr clover max = 180 m (no — falls short of 200 m). Juniper max = 2,100 m (yes) and mean = 320 m (yes). Only juniper can consistently disperse to 200 m.
Why the other 3 choices miss
- B
- Incorrect because burr clover's maximum distance is 180 m, which does not reach the target of 200 m.
- C
- Incorrect because neither dandelion (max 35 m) nor maple (max 60 m) can disperse seeds 200 m away.
- D
- Incorrect because burr clover's maximum distance (180 m) falls short of the 200 m target; only juniper reaches 200 m.
A biology class measured the rate of transpiration in bean plants using a potometer (bubble movement = 1 mm³ water loss). Experiments: Experiment 1 (Still air, 22°C, 60% humidity): rate = 2.1 mm³/min. Experiment 2 (Fan/moving air, 22°C, 60% humidity): rate = 4.8 mm³/min. Experiment 3 (Still air, 22°C, 30% humidity): rate = 5.6 mm³/min. Experiment 4 (Still air, 35°C, 60% humidity): rate = 4.3 mm³/min. Experiment 5 (Still air, 22°C, 90% humidity): rate = 0.8 mm³/min. Which experimental comparison best demonstrates the effect of humidity on transpiration rate?
- AExperiment 2 vs. Experiment 3
- BExperiments 1, 3, and 5Correct
- CExperiment 1 vs. Experiment 2
- DExperiment 1 vs. Experiment 4
Why B is right
To isolate the effect of humidity, all other variables must be identical. Experiments 1 (60% humidity), 3 (30% humidity), and 5 (90% humidity) all use still air at 22°C, varying only humidity. This comparison properly isolates humidity as the independent variable. Rates of 5.6, 2.1, and 0.8 mm³/min show that transpiration decreases as humidity increases.
Why the other 3 choices miss
- A
- Incorrect because Experiments 2 and 3 differ in both air movement (fan vs. still) and humidity (60% vs. 30%) simultaneously — two variables change, making it a confounded comparison.
- C
- Incorrect because Experiments 1 vs. 2 vary air movement (still vs. fan) while humidity is constant — this tests the effect of wind, not humidity.
- D
- Incorrect because Experiments 1 vs. 4 differ in temperature (22°C vs. 35°C) not humidity — this tests the effect of temperature.