Skip to content
ACT · Science

Optics

Optics appears in 9 reviewed ACT questions and sits in Science. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How Optics is tested

Example 1Easier
Experiment 9: A student investigated how the angle of incidence affects the angle of refraction when a light ray passes from air into glass (refractive index = 1.5). The student varied the angle of incidence and measured the corresponding refraction angle. Angle of Incidence (°) | Angle of Refraction (°) 0 | 0 10 | 6.6 20 | 13.2 30 | 19.5 45 | 28.1 60 | 35.3 Which statement is best supported by these data?
  1. AThe angle of refraction and incidence are unrelated.
  2. BThe angle of refraction is always greater than the angle of incidence.
  3. CEach measured refraction angle is less than its incidence angle.Correct
  4. DThe angle of refraction is always equal to the angle of incidence.

Why C is right

In every row of the table, the refraction angle is smaller than the incidence angle (e.g., 10° incident → 6.6° refracted; 60° incident → 35.3° refracted). When light passes from a less dense medium (air) to a more dense medium (glass), it bends toward the normal, resulting in a smaller refraction angle.
Why the other 3 choices miss
A
Incorrect because the data show a clear, consistent relationship — as incidence angle increases, refraction angle also increases in a predictable pattern.
B
Incorrect because refraction angles are consistently less than incidence angles in the data, not greater.
D
Incorrect because all refraction angles differ from incidence angles (except at 0°); they are systematically smaller, not equal.
Example 2Harder
Experiment 6: A student measured how the focal length of a convex lens affects the size of the image projected on a screen when the object is placed 30 cm in front of the lens. Focal Length (cm) | Image Distance (cm) | Image Height (cm) | Image Type 5 | 6.25 | 0.25 | Real, inverted 10 | 15 | 0.50 | Real, inverted 15 | 22.5 | 0.75 | Real, inverted 20 | 60 | 2.0 | Real, inverted 25 | No image | — | Virtual Note: For 25 cm focal length, no real image forms because the object is inside the focal length. Based on the lens equation (1/f = 1/do + 1/di where do = 30 cm), what is the image distance for a 10 cm focal length lens?
  1. A15 cmCorrect
  2. B30 cm
  3. C20 cm
  4. D10 cm

Why A is right

Using the lens equation: 1/f = 1/do + 1/di → 1/10 = 1/30 + 1/di → 1/di = 1/10 - 1/30 = 3/30 - 1/30 = 2/30 → di = 15 cm. This matches the table value for 10 cm focal length. The data and relationship in the passage point to this result more directly than the other choices.
Why the other 3 choices miss
B
Incorrect because di = 30 cm would require 1/di = 1/30, giving 1/f = 1/30 + 1/30 = 2/30, meaning f = 15 cm, not 10 cm.
C
Incorrect because di = 20 cm would require 1/di = 0.05, giving 1/f = 1/30 + 0.05 ≈ 0.083, meaning f ≈ 12 cm, not 10 cm.
D
Incorrect because di = 10 cm would require 1/di = 0.1, giving 1/do = 0.0, which would mean the object is at infinite distance, not 30 cm.
Example 3Medium
Table 1 shows the results of a study comparing three methods of measuring the speed of light in a glass prism: Method | Measured Speed (×10⁸ m/s) | Standard Deviation | Number of Trials Time-of-flight | 1.973 | 0.024 | 20 Snell's Law refraction | 1.989 | 0.008 | 50 Foucault rotating mirror | 1.981 | 0.015 | 30 Accepted speed of light in glass: 1.988 × 10⁸ m/s. Which method shows the best combination of accuracy (closeness to accepted value) and precision (small standard deviation)?
  1. ATime-of-flight, because it has the largest deviation from accepted value.
  2. BSnell's Law refraction, because it has the smallest standard deviation and is closest to the accepted value.Correct
  3. CTime-of-flight, because it has the fewest trials.
  4. DFoucault rotating mirror, because its value and standard deviation both fall midway between those of the other two methods.

Why B is right

Snell's Law refraction has the smallest standard deviation (0.008 × 10⁸ m/s = high precision) and measured value of 1.989 × 10⁸ m/s compared to accepted 1.988 × 10⁸ m/s (difference = 0.001 × 10⁸ m/s = high accuracy). It is both the most precise and most accurate method.
Why the other 3 choices miss
A
Incorrect because time-of-flight has the largest deviation from the accepted value (1.973 vs. 1.988 × 10⁸ m/s = 0.015 × 10⁸ m/s difference), making it the least accurate, not the best.
C
Incorrect because fewer trials generally reduces statistical reliability, and time-of-flight has both the largest deviation from accepted value and the largest standard deviation.
D
Incorrect because being in the middle is not the best combination: Foucault's value (1.981) is farther from 1.988 than Snell's (1.989), and its standard deviation (0.015) is larger than Snell's (0.008), so Snell's Law refraction beats it on both accuracy and precision.

Studied alongside

Other concepts from Science.