Skip to content
ACT · Science

Mechanics

Mechanics appears in 3 reviewed ACT questions and sits in Science. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How Mechanics is tested

Example 1Harder
Experiment 4: A physicist measured the speed of different balls after rolling down a frictionless ramp and hitting a pendulum (ballistic pendulum). The height the pendulum swings up indicates the ball's kinetic energy upon impact. Ball | Mass (kg) | Speed at bottom (m/s) | Kinetic Energy (J) 1 | 0.1 | 4.0 | 0.80 2 | 0.2 | 4.0 | 1.60 3 | 0.4 | 4.0 | 3.20 4 | 0.1 | 8.0 | 3.20 5 | 0.1 | 12.0 | 7.20 Note: KE = ½mv² Comparing Ball 3 and Ball 4, which have the same kinetic energy (3.20 J). Ball 3 has four times the mass of Ball 4, while Ball 4 has twice the speed. Which conclusion about the relationship between mass, speed, and kinetic energy is supported?
  1. AMass has no effect on kinetic energy whenever the speed of the ball is held constant.
  2. BDoubling speed increases kinetic energy by the same factor as quadrupling mass.Correct
  3. CDoubling speed has the same effect on kinetic energy as doubling mass.
  4. DIncreasing mass has a greater effect on kinetic energy per unit change than increasing speed does.

Why B is right

Ball 1 to Ball 2 (mass doubled, speed constant): KE doubles from 0.80 to 1.60 J. Ball 1 to Ball 4 (speed doubled, mass constant): KE quadruples from 0.80 to 3.20 J. Ball 1 to Ball 3 (mass quadrupled): KE quadruples from 0.80 to 3.20 J. So doubling speed = quadrupling mass in effect on KE, confirming KE ∝ v², not v.
Why the other 3 choices miss
A
Incorrect because comparing Ball 1 (0.1 kg, 0.80 J) to Ball 2 (0.2 kg, 1.60 J) at the same speed shows mass clearly affects kinetic energy.
C
Incorrect because doubling speed quadruples KE (0.80 → 3.20 J), while doubling mass only doubles KE (0.80 → 1.60 J). These effects are not equal.
D
Incorrect because it reverses the relationship: doubling mass only doubles KE (0.80 → 1.60 J), while doubling speed quadruples it (0.80 → 3.20 J), so speed has the greater effect because KE depends on v².
Example 2Medium
Experiment 3: A student measured how the angle of a ramp affects the velocity of a cart at the bottom, releasing the cart from rest at the top of a 1-meter ramp each time. Ramp Angle (°) | Height of ramp (m) | Final Velocity (m/s) 10 | 0.174 | 1.85 20 | 0.342 | 2.59 30 | 0.500 | 3.13 40 | 0.643 | 3.55 50 | 0.766 | 3.87 60 | 0.866 | 4.12 90 | 1.000 | 4.43 Note: For a frictionless ramp, v = √(2gh). Ramp height h = 1m × sin(angle). At 90° (vertical freefall), what is the theoretical maximum velocity at the bottom?
  1. A3.87 m/s
  2. B4.12 m/s
  3. C4.43 m/sCorrect
  4. D9.81 m/s

Why C is right

At 90°, the ramp is vertical, height = 1.000 m. Using v = √(2gh) = √(2 × 9.81 × 1.000) = √19.62 ≈ 4.43 m/s, which matches the table value. This is the theoretical maximum for a 1-meter drop from rest.
Why the other 3 choices miss
A
Incorrect because 3.87 m/s corresponds to the 50° angle, not the 90° vertical drop.
B
Incorrect because 4.12 m/s corresponds to the 60° angle, not 90°.
D
Incorrect because 9.81 m/s would be the velocity after falling 1 meter if v = g × t, but the correct formula is v = √(2gh) = 4.43 m/s, not g itself.
Example 3Medium
Experiment 7: A student tested the relationship between the mass of a falling object and the work required to lift it to a height of 2 meters using a spring scale. Object Mass (kg) | Weight (N) | Work to Lift 2 m (J) 0.5 | 4.9 | 9.8 1.0 | 9.8 | 19.6 2.0 | 19.6 | 39.2 5.0 | 49.0 | 98.0 10.0 | 98.0 | 196.0 Note: Work = force × distance = weight × height A student lifts a 3.0 kg object to a height of 5.0 m. What work is required?
  1. A29.4 J
  2. B196 J
  3. C147 JCorrect
  4. D58.8 J

Why C is right

Weight of 3.0 kg object = 3.0 × 9.8 = 29.4 N. Work = force × distance = 29.4 N × 5.0 m = 147 J. The data and relationship in the passage point to this result more directly than the other choices.
Why the other 3 choices miss
A
Incorrect because 29.4 J = work to lift 3.0 kg only 1 m, not 5 m.
B
Incorrect because 196 J = work to lift 10.0 kg to 2 m, or 4.0 kg to 5 m — neither matches the 3.0 kg at 5 m scenario.
D
Incorrect because 58.8 J = work to lift 3.0 kg only 2 m (29.4 × 2), not 5 m.

Studied alongside

Other concepts from Science.