Table 4 shows the half-reactions and standard reduction potentials (E°) for several metal ions:
Half-Reaction | E° (V)
Zn²+ + 2e⁻ → Zn | -0.76
Fe²+ + 2e⁻ → Fe | -0.44
Ni²+ + 2e⁻ → Ni | -0.25
Cu²+ + 2e⁻ → Cu | +0.34
Ag+ + e⁻ → Ag | +0.80
Note: A galvanic cell uses the most negative E° as the anode (oxidized) and most positive E° as cathode (reduced). Cell voltage = E°cathode - E°anode.
What is the cell voltage for a galvanic cell using zinc and silver electrodes?
- A0.04 V
- B0.44 V
- C2.12 V
- D1.56 VCorrect
Why D is right
Zinc has E° = -0.76V (most negative, acts as anode). Silver has E° = +0.80V (most positive, acts as cathode). Cell voltage = E°cathode - E°anode = 0.80 - (-0.76) = 0.80 + 0.76 = 1.56 V.
Why the other 3 choices miss
- A
- Incorrect because 0.04 V is too small; this might result from confusing copper (0.34 V) and nickel (-0.25 V) or similar close pairs.
- B
- Incorrect because 0.44 V would result from using iron as anode (E° = -0.44V) and the reference hydrogen electrode (0.00 V), not zinc and silver.
- C
- Incorrect because 2.12 V would require values not present in the table; the maximum cell voltage from these metals is 0.80 - (-0.76) = 1.56 V.
A chemistry student investigated electrochemical cells using standard reduction potentials. Standard reduction potentials (E°): Cu²⁺/Cu = +0.34 V. Zn²⁺/Zn = −0.76 V. Fe²⁺/Fe = −0.44 V. Ag⁺/Ag = +0.80 V. Al³⁺/Al = −1.66 V. Cell voltage: E°cell = E°cathode − E°anode. The student constructed three galvanic cells. Cell 1: Cu²⁺/Cu cathode, Zn²⁺/Zn anode. Cell 2: Ag⁺/Ag cathode, Fe²⁺/Fe anode. Cell 3: Cu²⁺/Cu cathode, Al³⁺/Al anode. Which cell produces the highest voltage?
- AAll three cells produce the same voltage.
- BCell 1
- CCell 3Correct
- DCell 2
Why C is right
E°cell = E°cathode − E°anode: Cell 1: 0.34 − (−0.76) = 0.34 + 0.76 = 1.10 V. Cell 2: 0.80 − (−0.44) = 0.80 + 0.44 = 1.24 V. Cell 3: 0.34 − (−1.66) = 0.34 + 1.66 = 2.00 V. Cell 3 produces the highest voltage (2.00 V).
Why the other 3 choices miss
- A
- Incorrect because each cell involves different electrode pairs with different potential differences, resulting in different voltages.
- B
- Incorrect because Cell 1 produces 1.10 V, lower than both Cell 2 (1.24 V) and Cell 3 (2.00 V).
- D
- Incorrect because Cell 2 produces 1.24 V, less than Cell 3's 2.00 V.
A chemist studied the electrochemical corrosion of three metal alloys in seawater by measuring corrosion current (mA/cm²) and mass loss (mg/cm²/year). Each alloy was tested as both cathode and anode in a galvanic couple with a standard steel electrode. Alloy / Corrosion potential (V vs. SHE) / Corrosion current (mA/cm²) / Mass loss (mg/cm²/year): Carbon steel: −0.44 V / 12.4 / 88. Stainless steel 316L: +0.15 V / 0.8 / 5. Bronze (Cu-Sn): +0.12 V / 1.1 / 8. Zinc: −0.76 V / 18.7 / 132. Which material would be most suitable as a sacrificial anode to protect a carbon steel ship hull?
- AZincCorrect
- BBronze
- CCarbon steel
- DStainless steel 316L
Why A is right
A sacrificial anode must be more electronegative (lower reduction potential) than the material being protected, so it oxidizes preferentially. Carbon steel has a corrosion potential of −0.44 V. Zinc at −0.76 V is more negative, meaning zinc will act as the anode (corrode) while the steel becomes the cathode (protected). Stainless steel (+0.15 V) and bronze (+0.12 V) are more positive than carbon steel and would accelerate its corrosion. Zinc is widely used as a sacrificial anode in marine applications.
Why the other 3 choices miss
- B
- Incorrect because bronze at +0.12 V is more positive than carbon steel; bronze would become the cathode and steel the anode, accelerating steel corrosion.
- C
- Incorrect because using carbon steel to protect carbon steel provides no electrochemical potential difference and therefore no cathodic protection.
- D
- Incorrect because stainless steel has a higher corrosion potential (+0.15 V) than carbon steel (−0.44 V); connecting them would make carbon steel the anode (corroding), opposite of protection.