Experiment 10: A student tested how the concentration of salt (NaCl) in a solution affects the boiling point, a phenomenon known as boiling point elevation. The student measured the boiling point of water with different amounts of dissolved NaCl.
NaCl Concentration (mol/L) | Boiling Point (°C)
0.0 | 100.0
0.5 | 100.5
1.0 | 101.0
1.5 | 101.5
2.0 | 102.0
2.5 | 102.5
A chef wants to boil water at exactly 101.8°C. What NaCl concentration should be used, based on the data?
- A1.5 mol/L
- B1.8 mol/LCorrect
- C2.5 mol/L
- D2.0 mol/L
Why B is right
The data show a perfectly linear relationship: boiling point increases by 0.5°C per 0.5 mol/L of NaCl, or equivalently 1.0°C per 1.0 mol/L. To achieve 101.8°C (1.8°C above 100°C), a concentration of 1.8 mol/L is required.
Why the other 3 choices miss
- A
- Incorrect because 1.5 mol/L produces a boiling point of 101.5°C, which is 0.3°C below the desired 101.8°C.
- C
- Incorrect because 2.5 mol/L produces a boiling point of 102.5°C, which is 0.7°C above the target temperature.
- D
- Incorrect because 2.0 mol/L produces a boiling point of 102.0°C, which is 0.2°C above the desired 101.8°C.
Experiment 3: A chemist conducted experiments on the vapor pressure of different liquids at various temperatures to understand the relationship between temperature and evaporation:
Temperature (°C) | Water (mmHg) | Ethanol (mmHg) | Acetone (mmHg)
0 | 4.6 | 12.2 | 59.5
20 | 17.5 | 43.9 | 185
40 | 55.3 | 135 | 462
60 | 149 | 352 | 1,000
80 | 355 | 812 | —
100 | 760 | — | —
Note: Boiling point is reached when vapor pressure equals atmospheric pressure (760 mmHg).
Based on the data, which liquid has the lowest boiling point?
- AWater, because it has the most data points.
- BEthanol, because its vapor pressure at 80°C (812 mmHg) exceeds atmospheric pressure.
- CAcetone, because its vapor pressure reaches 1,000 mmHg at 60°C, already exceeding atmospheric pressure.Correct
- DThey all boil at the same temperature.
Why C is right
Boiling occurs when vapor pressure = 760 mmHg (atmospheric). Acetone reaches 1,000 mmHg at 60°C, meaning it boiled somewhere between 40°C (462 mmHg) and 60°C (1,000 mmHg) — i.e., below 60°C. Ethanol reaches 760 mmHg between 60°C and 80°C (~78°C). Water reaches 760 mmHg at exactly 100°C. Acetone has the lowest boiling point.
Why the other 3 choices miss
- A
- Incorrect because the number of data points doesn't determine boiling point; vapor pressure reaching 760 mmHg determines boiling point.
- B
- Incorrect because while ethanol's vapor pressure exceeds atmospheric at 80°C, it had already crossed 760 mmHg before 80°C; also acetone crossed even earlier — acetone boils at a lower temperature than ethanol.
- D
- Incorrect because the vapor pressure curves reach 760 mmHg at clearly different temperatures: acetone at ~56°C, ethanol at ~78°C, water at 100°C.
A chemistry student measured the vapor pressure of ethanol at five temperatures and used the Clausius-Clapeyron equation to estimate enthalpy of vaporization. Data: 20°C: 44 mmHg. 30°C: 78 mmHg. 40°C: 135 mmHg. 50°C: 222 mmHg. 60°C: 352 mmHg. The normal boiling point of ethanol is 78.4°C. Based on the trend in the data, what would be the approximate vapor pressure of ethanol at 78.4°C?
- A760 mmHgCorrect
- B1,100 mmHg
- C440 mmHg
- D560 mmHg
Why A is right
By definition, the normal boiling point is the temperature at which vapor pressure equals atmospheric pressure (760 mmHg). Since 78.4°C is defined as ethanol's normal boiling point, its vapor pressure at that temperature is exactly 760 mmHg. This is consistent with the increasing trend in the data.
Why the other 3 choices miss
- B
- Incorrect because 1,100 mmHg exceeds atmospheric pressure, which would mean 78.4°C is above the normal boiling point, not at it.
- C
- Incorrect because 440 mmHg is too low; the trend from 352 mmHg at 60°C shows substantial increase is expected at 78.4°C.
- D
- Incorrect because 560 mmHg would be below atmospheric pressure, meaning ethanol would boil above 78.4°C — contradicting the definition of normal boiling point.