Skip to content
ACT · Science

Acid base

Acid base appears in 3 reviewed ACT questions and sits in Science. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How Acid base is tested

Example 1Medium
A chemist performed an experiment to determine the concentration of an unknown NaOH solution by titrating it with 0.150 M HCl. In three trials, the volumes of HCl required to reach the phenolphthalein endpoint were: Trial 1: 22.45 mL. Trial 2: 22.38 mL. Trial 3: 22.51 mL. The initial volume of NaOH used in each trial was exactly 25.00 mL. What is the concentration of the NaOH solution?
  1. A0.150 M
  2. B0.168 M
  3. C0.134 MCorrect
  4. D0.112 M

Why C is right

Average HCl volume = (22.45 + 22.38 + 22.51)/3 = 67.34/3 = 22.45 mL = 0.02245 L. Moles HCl = 0.150 M × 0.02245 L = 0.003368 mol. At the equivalence point: moles NaOH = moles HCl = 0.003368 mol. Concentration NaOH = 0.003368 mol / 0.02500 L = 0.1347 M ≈ 0.134 M.
Why the other 3 choices miss
A
Incorrect because 0.150 M would mean equal molarity to the HCl, but only 25.00 mL NaOH would need exactly 25.00 mL of 0.150 M HCl, not 22.45 mL.
B
Incorrect because 0.168 M would require fewer mL of a weaker acid to neutralize — the volume used (22.45 mL) is less than 25 mL, correctly indicating NaOH molarity is lower than HCl molarity.
D
Incorrect because 0.112 M would require less HCl (~18.7 mL) to reach equivalence with 25.00 mL of NaOH.
Example 2Harder
A chemist studied the acid-base properties of amino acids. Glycine has two ionizable groups: a carboxyl group (pKa₁ = 2.34) and an amino group (pKa₂ = 9.60). At the isoelectric point (pI), glycine carries no net charge. pI = (pKa₁ + pKa₂) / 2. What is the isoelectric point of glycine, and what is the net charge of glycine at pH 7.0?
  1. ApI = 5.97; net charge = −1 at pH 7.0
  2. BpI = 5.97; net charge = 0 at pH 7.0Correct
  3. CpI = 5.97; net charge = +1 at pH 7.0
  4. DpI = 7.0; net charge = 0 at pH 7.0

Why B is right

pI = (pKa₁ + pKa₂) / 2 = (2.34 + 9.60) / 2 = 11.94 / 2 = 5.97. At pH 7.0, which is between pKa₁ (2.34) and pKa₂ (9.60), both ionization states are intermediate. At pH 7.0, the carboxyl group is fully deprotonated (pKa₁ = 2.34, so pH >> pKa₁ → −COO⁻) and the amino group is mostly protonated (pKa₂ = 9.60, so pH < pKa₂ → −NH₃⁺). These two charges cancel, giving a net charge of approximately 0. This is the zwitterion form. Technically, pH 7.0 is very close to the isoelectric point (5.97), but glycine at pH 7 exists mostly as the zwitterion with net charge ≈ 0.
Why the other 3 choices miss
A
Incorrect because at pH 7.0, glycine is close to its isoelectric point (5.97); the amino group is still predominantly protonated (positive), roughly canceling the deprotonated carboxyl (negative), giving net charge ≈ 0, not −1.
C
Incorrect because at pH 7.0 (above pI), the solution is more basic than the isoelectric point, meaning glycine has a slight net negative charge tendency, not positive; net charge is approximately 0 at pH near the pI.
D
Incorrect because the pI is calculated as (2.34 + 9.60)/2 = 5.97, not 7.0; the isoelectric point is not 7.
Example 3Medium
A student performed an experiment to study the neutralization reaction between HCl and NaOH. Equal volumes (50 mL) of HCl were titrated with NaOH until the phenolphthalein endpoint was reached. The student varied HCl concentration and measured the volume of NaOH required. All NaOH solutions had a concentration of 0.5 M. Results: HCl concentration (M) / Volume NaOH (mL): 0.1 M HCl: 10.0 mL NaOH. 0.2 M: 20.0 mL. 0.3 M: 30.0 mL. 0.4 M: 40.0 mL. 0.5 M: 50.0 mL. If 50 mL of 0.35 M HCl were titrated with 0.5 M NaOH, what volume of NaOH would be needed?
  1. A35.0 mLCorrect
  2. B25.0 mL
  3. C17.5 mL
  4. D45.0 mL

Why A is right

From the data, a pattern is clear: moles HCl = moles NaOH at equivalence. Moles HCl = 0.35 M × 0.050 L = 0.0175 mol. Volume NaOH needed = moles / concentration = 0.0175 / 0.5 = 0.035 L = 35.0 mL. Alternatively, by interpolation: 0.3 M HCl requires 30 mL NaOH and 0.4 M requires 40 mL NaOH; 0.35 M (midpoint) requires 35 mL.
Why the other 3 choices miss
B
Incorrect because 25.0 mL corresponds to 0.5 M × 0.025 L = 0.0125 mol NaOH, equaling 0.25 M HCl × 0.05 L — not enough for 0.35 M HCl.
C
Incorrect because 17.5 mL would correspond to 0.5 M × 0.0175 L = 0.00875 mol NaOH, which would neutralize only half the moles of HCl present.
D
Incorrect because 45.0 mL corresponds to neutralizing 0.45 M HCl × 0.05 L = 0.0225 mol — more than needed for 0.35 M HCl.

Studied alongside

Other concepts from Science.