8 topics. Each one opens with its key idea, then the detail you need to use it.
1. Angles: lines, parallels and polygons
Key idea: Straight line = 180, right angle = 90, triangle = 180, polygon = (n − 2) × 180, and parallel lines make only two angle sizes (all 90 if the transversal is perpendicular).
Two angles are supplementary when they add to 180 degrees, which happens whenever they sit side by side on a straight line. Two angles are complementary when they add to 90 degrees, so if one angle is 52 degrees, its supplement is 128 and its complement is 38. Vertical angles, the pair opposite each other where two lines cross, are always equal.
When a transversal cuts two parallel lines, it creates eight angles but only two different sizes, unless it is perpendicular, in which case all eight angles are 90 degrees. Alternate interior angles are equal, and so are corresponding angles, while any small angle plus any large angle adds to 180. So if one angle is 72 degrees, every angle in the figure is either 72 or 108.
The three angles of a triangle add to 180 degrees. An exterior angle of a triangle equals the sum of the two interior angles that are not next to it, because the exterior angle and its neighbor also add to 180. For a polygon with n sides, the interior angles add to (n − 2) × 180, since you can split it into n − 2 triangles by drawing diagonals from one corner. A hexagon splits into 4 triangles, so its angles total 720 degrees, and each angle of a regular hexagon is 720 ÷ 6 = 120 degrees. The exterior angles of any convex polygon, one at each vertex, always add to 360 degrees.
2. Area, perimeter and composite figures
Key idea: Area multiplies and perimeter adds; in a composite figure, count only edges on the outside.
Perimeter is the distance around a shape, so you add side lengths, while area is the space inside, so you multiply. A rectangle that is 15 by 4 has perimeter 2(15 + 4) = 38 and area 60. Because a square's four sides are equal, a perimeter of 28 means a side of 7 and an area of 49. A triangle's area is half of base times height, and the height must be perpendicular to the base, so a slanted side is not the height unless it meets the base at a right angle.
Composite figures combine simple shapes, and you find their area either by adding the pieces or by taking a big shape and subtracting the cut-out part. Suppose a 10-by-6 rectangle has a semicircle attached to one of its 6-unit sides. The semicircle has radius 3, so its area is half of 9π, and the total area is 60 + 4.5π.
The perimeter of a composite figure needs more care, because only the outside edges count. In the same figure, the 6-unit side covered by the semicircle is now inside the shape, so you drop it. The perimeter is 10 + 10 + 6 plus half the circumference, 3π, which gives 26 + 3π. Students often add every segment they see, which mistakenly counts an inside edge.
3. The Pythagorean theorem and the distance formula
Key idea: Square the legs, add, then take the square root; on a grid, the legs are the change in x and the change in y.
In a right triangle with legs a and b and hypotenuse c, a² + b² = c². The hypotenuse is always the longest side, and it always sits opposite the right angle. With legs 8 and 15, c² = 64 + 225 = 289, so c = 17. To find a missing leg, subtract instead: a triangle with hypotenuse 13 and leg 5 has its other leg equal to √(169 − 25) = 12.
Learn the common triples, because the SAT uses them to save you time: 3-4-5, 5-12-13, 8-15-17 and 7-24-25. Any multiple of a triple also works, so 6-8-10 and 9-12-15 are right triangles too. Be careful not to force a triple that does not fit, since legs of 9 and 12 belong to the 3-4-5 family and give a hypotenuse of 15, not 13.
The distance formula is the same theorem placed on a coordinate grid. To find the distance from (1, 2) to (7, 10), picture a right triangle whose horizontal leg is 7 − 1 = 6 and whose vertical leg is 10 − 2 = 8. The distance is √(36 + 64) = 10, and written as a general formula it is √((x₂ − x₁)² + (y₂ − y₁)²). The midpoint is the average of the x-values and the average of the y-values, so here it is (4, 6).
4. Special right triangles
Key idea: 45-45-90 is x, x, x√2; 30-60-90 is x, x√3, 2x, with x opposite the 30-degree angle.
Two right triangles appear so often that the reference sheet lists them. In a 45-45-90 triangle, the legs are equal and the hypotenuse is a leg times √2, so the sides are x, x and x√2. This triangle is half of a square, which means a square with side 5 has a diagonal of 5√2.
In a 30-60-90 triangle, the sides are x, x√3 and 2x. The shortest side, x, is opposite the 30-degree angle, and the hypotenuse is twice that length. The middle side, x√3, is opposite the 60-degree angle. This triangle is half of an equilateral triangle, which explains why the short leg is exactly half the hypotenuse. An equilateral triangle with side 10 splits into two 30-60-90 triangles with short leg 5, so its height is 5√3 and its area is half of 10 × 5√3, or 25√3.
The main trap is matching the wrong side to the wrong angle. If the side opposite 30 degrees is 7, the hypotenuse is 14 and the longer leg is 7√3. Students who pick 7√3 for the hypotenuse have mixed up the long leg and the hypotenuse. Always place the shortest side opposite the smallest angle, and then build out from it.
5. Trigonometry: sine, cosine and tangent
Key idea: Label opposite and adjacent from the angle you are given, and remember that sin x° = cos(90 − x)°.
SOHCAHTOA names three ratios for an acute angle in a right triangle. Sine is opposite over hypotenuse, cosine is adjacent over hypotenuse, and tangent is opposite over adjacent. "Opposite" and "adjacent" depend on which angle you are standing at, so name the angle before you label the sides. The hypotenuse never changes, because it is always the side across from the right angle.
To find a side, write the ratio as an equation and solve it. Suppose angle A is 35 degrees, the hypotenuse is 20, and you want the side opposite A. Since sin 35° = opposite ÷ 20, the side is 20 sin 35°. If you instead knew that side and wanted the hypotenuse, you would divide, getting the side ÷ sin 35°. Many wrong choices simply swap multiplying and dividing.
The two acute angles of a right triangle are complementary, and the side opposite one angle is adjacent to the other. As a result, the sine of one acute angle equals the cosine of the other: sin x° = cos(90 − x)°. If sin A = 3/5 in right triangle ABC with the right angle at C, then cos B is also 3/5. This fact shows up on the SAT, and it needs no calculator.
Ratios also let you rebuild a whole triangle. If tan A = 3/4, the legs are in a 3-to-4 ratio, the hypotenuse is 5 by the Pythagorean theorem, and so sin A = 3/5 and cos A = 4/5. On the unit circle, which has radius 1 and its center at the origin, the point at angle θ has coordinates (cos θ, sin θ), so cosine is the x-coordinate and sine is the y-coordinate.
6. Similar triangles and scale factor
Key idea: Find the scale factor k from one pair of matching sides; lengths scale by k, areas by k², volumes by k³.
Two triangles are similar when their angles match, so one is a scaled copy of the other. You can prove similarity with two pairs of equal angles, since the third pair must then match as well. This often happens when a line inside a triangle runs parallel to one side: the small triangle and the big triangle share an angle, and the parallel line creates matching corresponding angles. Congruent triangles are the special case with a scale factor of 1, and SSS, SAS, ASA or AAS proves congruence.
In similar triangles, every pair of matching sides has the same ratio, called the scale factor. Match sides by the angles they sit opposite (or by the order of the vertex letters), not by how the figure is drawn. The shortest side always pairs with the shortest side, and so on. If a triangle with sides 5, 12 and 13 is similar to one whose shortest side is 15, the scale factor is 3, and the new sides are 15, 36 and 39.
The scale factor affects each measurement differently. Perimeter is a length, so it grows by the scale factor itself, and 30 becomes 90. Area grows by the square of the scale factor: if the sides of two similar triangles are in a 2-to-3 ratio and the smaller area is 20, the larger area is 20 × 9/4 = 45. The volume of similar solids grows by the cube of the scale factor. This idea also explains trigonometry, because similar right triangles have equal side ratios and therefore equal sines and cosines.
7. Circles: arcs, sectors, radians and equations
Key idea: Arcs and sectors are (angle ÷ 360) of the whole; in a circle's equation, the signs flip for the center and the right side is r².
The circumference is 2πr and the area is πr². Keep them straight by dimension: circumference is a length, so the radius is not squared. A circle with radius 7 has circumference 14π and area 49π, and if a question gives the diameter, halve it first.
An arc length or a sector area is a fraction of the whole circle. For a circle with radius 9 and a central angle of 120 degrees, the fraction is 120/360, or one third. The arc length is one third of 18π, which is 6π, and the sector area is one third of 81π, which is 27π. Angles may also be given in radians, where π radians equal 180 degrees, and in radians the arc length is simply radius times angle. Here, 120 degrees is 2π/3 radians, and 9 × 2π/3 = 6π, which matches.
A tangent line touches the circle at one point and is perpendicular to the radius drawn to that point, and that right angle often creates a right triangle for the Pythagorean theorem. An inscribed angle is half of the central angle that cuts off the same arc.
On a grid, a circle with center (h, k) and radius r has the equation (x − h)² + (y − k)² = r². If the equation comes expanded, complete the square. For x² + y² − 6x + 8y = 11, add 9 and 16 to both sides, which gives (x − 3)² + (y + 4)² = 36. The center is (3, −4) and the radius is 6, because the right side is r², not r.
8. Volume and surface area
Key idea: Prisms and cylinders are base × height, cones and pyramids are one third of that, and surface area is the sum of the faces.
Volume measures the space inside a solid. A prism or cylinder has the same cross-section all the way up, so its volume is base area times height. A box is length × width × height, and a cylinder is πr²h, so radius 4 and height 5 give 80π. A cone or pyramid narrows to a point and holds exactly one third of the matching prism or cylinder, so a cone with radius 3 and height 8 has volume (1/3)π(9)(8) = 24π. A sphere has volume (4/3)πr³. Always use the radius, so a sphere with diameter 12 uses r = 6 and has volume 288π.
All of these formulas appear on the reference sheet, so the usual errors come from using them carelessly. Students forget to square the radius, double it instead of squaring it, or leave off the one third for a cone.
Surface area is the total area of the outside faces. It is not on the reference sheet, so build it from pieces. A box has six rectangles in three matching pairs, which makes its surface area 2(lw + lh + wh). A cylinder has two circles plus a rolled-up rectangle whose width is the circumference, so its surface area is 2πr² + 2πrh.
When dimensions change, think in terms of scale. Doubling only the height of a cylinder doubles its volume, but doubling only the radius multiplies the volume by 4, because the radius is squared.