Skip to content
SAT · Geometry and Trigonometry

Cylinder

Cylinder appears in 3 reviewed SAT questions and sits in Geometry and Trigonometry. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How Cylinder is tested

Example 1Medium
A cylinder has a radius of 3 and a height of 10. What is the volume of the cylinder? (Use pi ≈ 3.14)
  1. A942.00
  2. B282.60Correct
  3. C94.20
  4. D188.40

Why B is right

The volume of a cylinder is V = pi × r^2 × h. With r = 3 and h = 10: V = 3.14 × 3^2 × 10 = 3.14 × 9 × 10 = 3.14 × 90 = 282.60. The answer is (B).
Why the other 3 choices miss
A
This squares the height instead of the radius: 3.14 × 3 × 10^2 = 3.14 × 300 = 942.00.
C
This forgets to square the radius: 3.14 × 3 × 10 = 94.20.
D
This is 2 × pi × r × h = 2 × 3.14 × 3 × 10 = 188.40, the lateral surface area of the cylinder, not its volume.
Example 2Medium
A cylinder and a cone both have the same radius (r = 4) and height (h = 9). What is the ratio of the volume of the cylinder to the volume of the cone?
  1. A9:1
  2. B1:3
  3. C3:1Correct
  4. D1:9

Why C is right

V_cylinder = pi × r^2 × h. V_cone = (1/3) × pi × r^2 × h. Ratio = 1 : (1/3) = 3:1. The geometry or trigonometry follows directly from the given measurements and relationships.
Why the other 3 choices miss
A
Incorrect: 9:1 confuses the height value (9) with the volume ratio.
B
Incorrect: 1:3 is the ratio of cone to cylinder, not cylinder to cone.
D
Incorrect: 1:9 would apply if the height differed by a factor of 9, but here h is the same.
Example 3Easier
A cylinder has a radius of 3 and a height of 10. What is the volume of the cylinder in terms of pi?
  1. A30pi
  2. B60pi
  3. C90piCorrect
  4. D270pi

Why C is right

The volume of a cylinder is V = pi × r^2 × h. With r = 3 and h = 10, square the radius first: r^2 = 9. Then V = pi × 9 × 10 = 90pi, which is choice C.
Why the other 3 choices miss
A
30pi comes from pi × r × h = pi × 3 × 10, which uses the radius without squaring it.
B
60pi comes from pi × 6 × 10, which uses the diameter (6) where r^2 (9) belongs.
D
270pi comes from pi × 27 × 10, which cubes the radius (3^3 = 27) instead of squaring it.

Studied alongside

Other concepts from Geometry and Trigonometry.