Which of the following best explains why developing countries often face resistance to transitioning away from fossil fuels?
- ARenewable energy technology does not exist in developing countries
- BAll developing countries have abundant renewable resources that make fossil fuels unnecessary
- CFossil fuels currently provide affordable energy needed for economic development, and transition costs can be prohibitive without international financial supportCorrect
- DDeveloping countries have no need for electricity or modern energy
Why C is right
Many developing countries rely on fossil fuels for affordable energy to power economic growth. Transitioning to renewables requires significant upfront investment in infrastructure, technology, and workforce training that may be difficult without financial and technical assistance.
Why the other 3 choices miss
- A
- Incorrect because renewable energy technologies are increasingly available and competitive in developing countries; the challenge is financing the transition.
- B
- Incorrect because while many developing countries have abundant renewable resources, infrastructure, financing, and grid development challenges remain.
- D
- Incorrect because developing countries need and are rapidly expanding modern energy access; energy poverty affects hundreds of millions of people.
Compare the lifecycle CO2 emissions (grams CO2 per kWh) of the following electricity sources:
Coal: 820 g CO2/kWh
Natural gas: 490 g CO2/kWh
Solar PV: 48 g CO2/kWh
Nuclear: 12 g CO2/kWh
Wind: 11 g CO2/kWh
Switching a 1,000 MW coal plant to natural gas would reduce annual CO2 emissions by approximately what percentage?
- A60%
- B80%
- C20%
- D40%Correct
Why D is right
Percentage reduction = (Coal emissions - Gas emissions) / Coal emissions x 100 = (820 - 490) / 820 x 100 = 330/820 x 100 = approximately 40%. Switching from coal to natural gas reduces CO2 emissions by about 40%, which is significant but still leaves substantial emissions compared to wind, solar, or nuclear.
Why the other 3 choices miss
- A
- Incorrect. A 60% reduction would mean natural gas emits only 328 g CO2/kWh, which is lower than the actual 490 g CO2/kWh. This overestimates the benefit of switching to gas.
- B
- Incorrect. An 80% reduction would mean natural gas emits only 164 g CO2/kWh. This level of reduction is achievable by switching to nuclear or renewables, but not to natural gas.
- C
- Incorrect. A 20% reduction would mean natural gas emits 656 g CO2/kWh, which is higher than the actual 490 g CO2/kWh. The actual reduction is roughly double this estimate.
A city plans to reduce its carbon emissions from electricity by 50% within 10 years. Its current electricity mix is: coal 60%, natural gas 25%, nuclear 10%, renewables 5%. Using the lifecycle emissions data (coal: 820 g CO2/kWh, gas: 490 g CO2/kWh, nuclear: 12 g CO2/kWh, renewables: 30 g CO2/kWh), which combination of changes would most likely achieve the 50% reduction target?
- ADouble nuclear power from 10% to 20% while keeping coal at 60%
- BIncrease renewable energy from 5% to 15% while keeping coal and gas the same
- CRetire all coal plants and replace them with 30% natural gas and 30% wind/solarCorrect
- DReplace all coal with natural gas, keeping other sources the same
Why C is right
Current emissions per kWh = (0.60 x 820) + (0.25 x 490) + (0.10 x 12) + (0.05 x 30) = 492 + 122.5 + 1.2 + 1.5 = 617.2 g/kWh. Option B: (0.30 x 490) + (0.25 x 490) + (0.10 x 12) + (0.35 x 30) = 147 + 122.5 + 1.2 + 10.5 = 281.2 g/kWh. Reduction = (617.2 - 281.2)/617.2 = 54.4%, achieving the target.
Why the other 3 choices miss
- A
- Incorrect. Doubling nuclear to 20%: (0.60 x 820) + (0.15 x 490) + (0.20 x 12) + (0.05 x 30) = 492 + 73.5 + 2.4 + 1.5 = 569.4 g/kWh. Reduction = (617.2 - 569.4)/617.2 = 7.7%, far below the 50% target.
- B
- Incorrect. Increasing renewables to 15%: (0.60 x 820) + (0.25 x 490) + (0.10 x 12) + (0.15 x 30) = 492 + 122.5 + 1.2 + 4.5 = 620.2 g/kWh (actually increases slightly because the 10% added to renewables must come from somewhere, and as stated this doesn't reduce coal). This barely changes emissions.
- D
- Incorrect. Replacing coal with gas: (0.85 x 490) + (0.10 x 12) + (0.05 x 30) = 416.5 + 1.2 + 1.5 = 419.2 g/kWh. Reduction = (617.2 - 419.2)/617.2 = 32.1%, falling short of 50%.