On this page · 5 sections
The PSAT/NMSQT has 98 questions in 134 minutes. Reading and Writing is two modules of 27 questions at 32 minutes each. Math is two modules of 22 questions at 35 minutes each. There is no penalty for a wrong answer, so a wrong answer and a blank both earn nothing and a guess can only help. Your score comes from the questions you answer correctly, adjusted for how hard they are. Some questions are also unscored pretest items that you cannot spot, so every question deserves an answer. That one rule drives everything here: a blank is always a guaranteed zero, while a guess on a four-choice question is right one time in four. Cross off one bad choice and your odds rise to one in three. Cross off two and they reach one in two.
Guessing well is not luck. It is the skill of using what you do know to remove choices you can prove are wrong, then deciding quickly when to stop working and commit. The test runs in the Bluebook app, which gives you two tools for this. The Option Eliminator lets you strike out a choice on screen, and Mark for Review flags a question so you can find it again. You can move freely within a module, but once you submit a module you cannot go back to it. So every question in a module needs an answer before its timer runs out.
The test is adaptive by section. How you do on the first module decides whether the second module is harder or easier. A harder second module gives you access to higher scores, so careful work and smart guessing in module 1 pay off twice. Roughly a quarter of the math questions are student-produced responses with no choices, so elimination does not work there. For those you guess by estimating, which is covered below.
The steps
- 1
Answer every question, every time
Make this a fixed rule before test day so you never debate it under pressure. There is no penalty for wrong answers on the PSAT, so a blank question is a lost point you could have had for free. Before you submit any module, open the question navigator at the bottom of the screen. Check that no question shows as unanswered. If the timer is under a minute and you still have blanks, click a choice on each one right away, then go back and think if time remains.
- 2
Pace in two passes and flag hard ones early
Your budget is about 71 seconds per Reading and Writing question and about 95 seconds per math question. On the first pass, answer what you can. If a question is still unclear after about a minute, cross off what you can, pick your best remaining choice, and click Mark for Review. Do not leave it blank on the flag, because if time runs out the flagged guess still counts. On the second pass, return only to flagged questions. One hard question should never steal the time you need for three easier ones later in the module.
- 3
Predict before you read the choices
Elimination works best when you have something to compare the choices against. Cover the choices and decide what the answer should look like. On a transitions question, name the relationship first: contrast, cause and effect, an example, or an added point. On a words-in-context question, think of your own simple word for the blank. On a math question, estimate the size and sign of the answer. Then go through the choices and use the Option Eliminator to strike every one that clashes with your prediction.
- 4
Eliminate for a reason you can name
Only cross off a choice when you can say exactly why it fails. In Reading and Writing, common reasons are: it goes beyond what the text says, it is too extreme ("always", "proves", "never"), it answers a different question, or it is true but irrelevant to the stated goal. In Standard English Conventions, compare the choices side by side. Their differences show you the rule being tested, such as a comma splice or a subject-verb mismatch. In math, strike answers that have the wrong sign, the wrong units, or a size that does not match your estimate. A choice you merely dislike stays in play.
- 5
Break a tie with the text or a quick check
When two choices are left, stop rereading them and go back to the source. In Reading and Writing, find the exact line in the passage that one choice depends on, and see whether the passage actually says it. The narrower, more cautious choice wins more often than the bold one, because the right answer must be fully supported. In math, test the two choices directly. Plug each back into the equation, try a simple number such as x = 2, or graph both sides in the built-in Desmos calculator and read where they meet. A 20-second check often ends the tie.
- 6
Guess on student-produced responses by estimating
Math questions with no choices still deserve an answer. Use what you have. If you know the answer is a positive number between 10 and 20, enter something in that range, like 15, rather than nothing. If you set up an equation but cannot finish the algebra, graph it in Desmos and type the value you see. Fractions and negative answers are allowed, so do not round a fraction you have already found. A blank here is exactly as worthless as a blank on a multiple-choice question.
- 7
Commit, then move on without second-guessing
Once you have picked an answer after real elimination, leave it unless you find a specific reason to change it. A new reason means you spotted a line in the text, a calculation error, or a rule you missed. A vague feeling that another choice "looks better" is not a reason. With two minutes left in a module, stop reworking old questions. Use the time to confirm that every question has a choice selected, then submit.
Worked through
Here is how the procedure plays out at the end of a Reading and Writing module. You have 2 minutes 40 seconds left. The navigator shows one question unanswered and two flagged. You start with the unanswered one, because a blank is the biggest risk.
The question reads:
"Marine biologist Ayana Ortiz expected coral larvae to settle fastest on smooth tiles. ______, the larvae clustered on the roughest tiles in her tank and mostly avoided the smooth ones."
Which choice completes the text with the most logical transition? A) Similarly, B) Instead, C) For example, D) As a result,
Step 1, predict. The first sentence says what Ortiz expected. The second says the larvae did the opposite. So you need a contrast word before you look at the choices.
Step 2, eliminate with a reason. "Similarly" signals that the second idea matches the first, but these ideas clash, so strike A. "For example" introduces a case of the first idea, and the rough tiles are not an example of smooth tiles, so strike C. "As a result" means the expectation caused the clustering, but larvae do not respond to a scientist's guess, so strike D.
Step 3, commit. Only B is left, and it names the contrast you predicted. You select it in about 30 seconds.
Now you open the first flagged question, a words-in-context item. Earlier you had already struck two choices and picked one of the last two. You reread the sentence around the blank and find a phrase, "barely noticeable", that points to a word meaning slight. Your earlier pick meant dramatic, so you switch. This time you have a specific reason, which is the only kind of reason that justifies a change.
You have 50 seconds left for the second flagged question. You have not found a reason to change its answer, so you leave it alone. You check the navigator once more, see no blanks, and submit. Every question is answered, and each guess was made on the best odds available.
Common mistakes
Leaving any question blank. The PSAT has no penalty for wrong answers, so a blank is a sure zero while even a random guess on a four-choice question earns the point one time in four.
Flagging a question with Mark for Review but not selecting an answer first. If the module timer runs out before you return, the question stays blank and you lose a point you could have guessed.
Spending three or four minutes on one hard question early in a module, which forces rushed mistakes or blanks on easier questions at the end. You can't tell which questions count most or which are unscored, and the minutes you spend on one stuck question are minutes taken from several you could answer.
Crossing off choices because they "feel wrong" instead of for a reason you can name. That often removes the correct answer, especially when the right choice uses plain wording and a wrong one sounds impressive.
Changing a committed answer on a vague hunch during review. Switch only when you find a specific line in the text, a calculation error, or a grammar rule you missed.
Leaving student-produced math responses empty because there are no choices to eliminate. An estimate from your setup or a Desmos graph can still be right, and an empty box never is.
Checklist
- I answer every question in a module before submitting, and I check the question navigator for blanks every time.
- I select a best-guess answer before I click Mark for Review, never after.
- I know my time budget: about 71 seconds per Reading and Writing question and about 95 seconds per math question.
- I predict the answer, such as the relationship for a transition or the size of a math result, before reading the choices.
- I can name the specific reason each crossed-off choice is wrong: too extreme, off topic, unsupported, wrong sign, or wrong size.
- When two choices remain, I go back to the text or test both choices in the equation or in Desmos instead of rereading the choices.
- I enter an estimate on student-produced math responses I cannot finish rather than leaving the box empty.
- I change an answer only when I find a concrete reason, not because a different choice suddenly looks better.