A 10 kg sign hangs from two cables attached to the ceiling, each making a 30-degree angle with the vertical. Which condition must be satisfied for the sign to remain in static equilibrium?
- ABoth the sum of forces and the sum of torques must equal the weight of the sign.
- BThe sum of torques is zero but the net force can be nonzero as long as objects are rigid.
- CThe sum of all forces is zero AND the sum of all torques about any axis is zero.Correct
- DThe sum of forces is zero but torques do not matter for static objects.
Why C is right
For an object to be in complete static equilibrium, two independent conditions must hold: (1) the net force must be zero (translational equilibrium: sum F = 0), and (2) the net torque about any axis must be zero (rotational equilibrium: sum tau = 0). Both conditions are necessary and sufficient.
Why the other 3 choices miss
- A
- Incorrect because the sums must equal zero, not the weight; a net force equal to the weight would imply the sign accelerates.
- B
- Incorrect because a nonzero net force would cause translational (linear) acceleration, violating the static condition even for rigid bodies.
- D
- Incorrect because torque equilibrium is essential for preventing rotation; a net torque would cause the sign to spin even if forces balance.
A 3 m long uniform rod weighing 60 N is balanced on a pivot placed 1 m from one end. To keep it in equilibrium, what force F must be applied downward at the short end?
- A20 N
- B30 NCorrect
- C60 N
- D40 N
Why B is right
Place the pivot 1 m from the short end. The rod's center of mass is at 1.5 m from the short end, which is 0.5 m from the pivot on the long side. The weight produces a torque about the pivot of 60 N x 0.5 m = 30 N·m. The applied downward force F at the short end is 1 m from the pivot on the opposite side, producing the balancing torque F x 1 m. For equilibrium: F x 1 = 30, so F = 30 N.
Why the other 2 choices miss
- A
- Incorrect because 20 N would not balance the torque from the weight; the moment arm calculation gives F = 30 N.
- C
- Incorrect because 60 N equals the total weight of the rod and does not account for the moment arms in the torque equation.
A wrench is used to tighten a bolt. The mechanic applies a force of 40 N perpendicular to the handle at 0.3 m from the bolt. What is the torque applied?
- A12 N*mCorrect
- B133 N*m
- C40 N*m
- D4 N*m
Why A is right
Torque = F * r * sin(theta) = 40 * 0.3 * sin(90) = 40 * 0.3 * 1 = 12 N*m. The force is perpendicular to the moment arm (theta = 90 degrees), so sin(90) = 1. The result follows from the rotational relationship given in the problem, usually through conservation of angular momentum or torque balance.
Why the other 3 choices miss
- B
- Incorrect because 133 N*m = 40/0.3 divides instead of multiplying force by distance.
- C
- Incorrect because 40 N*m uses only the force without the moment arm; torque requires multiplying by the distance from the pivot.
- D
- Incorrect because 4 N*m = 40*0.1 uses a moment arm of 0.1 m instead of 0.3 m.