Skip to content
AP Physics 1 · Torque and Rotational Dynamics; Energy and Momentum of Rotating Systems

Moment of inertia

Moment of inertia appears in 122 reviewed AP Physics 1 questions and sits in Torque and Rotational Dynamics; Energy and Momentum of Rotating Systems. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How Moment of inertia is tested

Example 1Harder
A composite object consists of a thin rod of mass and length attached at one end to the center of a disk of mass and radius . The axis of rotation passes through the free end of the rod, perpendicular to the rod. What is the total moment of inertia? (, )
  1. A
  2. B
  3. C
  4. DCorrect

Why D is right

The rod rotates about its free end: . The disk's center is at distance from the axis. By the parallel axis theorem: . Total .
Why the other 3 choices miss
A
Incorrect. This uses (the hoop/ring formula) for the disk instead of the correct disk formula , even though it does include a parallel axis term of .
B
Incorrect. This applies the parallel axis theorem but uses the disk radius as the displacement, giving , when the disk's center is actually displaced by , so the added term should be .
C
Incorrect. This adds the rod and disk moments of inertia but forgets to apply the parallel axis theorem for the disk, which is displaced by from the rotation axis.
Example 2Medium
A student attaches four 0.5 kg masses to a massless rod at distances of 0.2 m, 0.4 m, 0.6 m, and 0.8 m from the axis of rotation. What is the total moment of inertia about the axis?
  1. A1.2 kg*m^2
  2. B0.4 kg*m^2
  3. C0.3 kg*m^2
  4. D0.6 kg*m^2Correct

Why D is right

For point masses on a massless rod, the moment of inertia is I = sum of m*r^2, and each mass contributes based on the square of its own distance from the axis. With every mass 0.5 kg: I = 0.5*(0.2^2 + 0.4^2 + 0.6^2 + 0.8^2) = 0.5*(0.04 + 0.16 + 0.36 + 0.64) = 0.5*(1.20) = 0.60 kg*m^2. The outermost mass alone gives 0.32 kg*m^2, more than half the total, because I depends on r^2.
Why the other 3 choices miss
A
Adds the r^2 values (1.20 m^2) but leaves out the 0.5 kg mass factor, which is the same as treating each mass as 1 kg.
B
Counts only some of the masses, for example only the ones at 0.4 m and 0.8 m: 0.5*(0.16 + 0.64) = 0.40 kg*m^2. Every mass on the rod adds to the total.
C
Averages the squared distances (1.20/4 = 0.30) and drops the mass. Moment of inertia is the sum of m*r^2 over all masses, not an average.
Example 3Medium
A solid sphere (I = (2/5)MR^2) and a solid cylinder (I = (1/2)MR^2) of the same mass and radius start from rest and roll without slipping down the same incline. Which reaches the bottom first?
  1. AThe solid sphere, because its smaller rotational inertia leaves more energy for translation.Correct
  2. BThe solid cylinder, because its larger moment of inertia gives it more angular momentum.
  3. CThey reach the bottom at the same time because they have the same mass and radius.
  4. DThe solid cylinder, because it has less rotational inertia than the sphere.

Why A is right

When rolling without slipping, the object with a smaller moment of inertia (relative to MR^2) converts a larger fraction of gravitational PE to translational KE. The sphere (I = 0.4MR^2) has a smaller moment of inertia than the cylinder (I = 0.5MR^2), so the sphere reaches the bottom first.
Why the other 3 choices miss
B
Incorrect. A larger moment of inertia means more energy is stored as rotational KE, leaving less for translational KE. This makes the cylinder slower, not faster.
C
Incorrect. Although they have the same mass and radius, their different mass distributions lead to different moments of inertia and different translational accelerations.
D
Incorrect. The cylinder has a larger moment of inertia (0.5MR^2) than the sphere (0.4MR^2), so more of its energy goes to rotation, making it slower.

Studied alongside

Other concepts from Torque and Rotational Dynamics; Energy and Momentum of Rotating Systems.