Skip to content

Free-response practice

The Translation Between Representations FRQ

12 points2 original prompts4 scored examples

Translation Between Representations (TBR) is the second of the four free-response questions on the AP Physics 1 exam, and at 12 points it is the most valuable single question in the section. The free-response section is worth 50% of your exam score and has four questions worth 10, 12, 10 and 8 points. Because TBR holds 12 of those 40 points, it is worth about 15% of your entire score, so give it about 30% of your free-response time.

On this page · 6 sections

The question gives you one physical setup and asks you to describe it in four different languages. Part A asks for a diagram, which is usually a free-body diagram or a set of energy bar charts, though it can also be a sketch of position or velocity against time. Part B asks you to derive a symbolic equation, using letters like m, g, theta and mu instead of numbers. Part C asks you to sketch a graph showing how one quantity depends on another. Part D asks you to connect two of your representations, usually by using your equation to explain a claim or to defend the shape of your graph.

The four parts are built to depend on each other. Your diagram should tell you which terms go into your derivation, and your derivation should tell you what shape your graph must have. Part D checks whether you can see that link. Readers score with a point-by-point rubric, so each point is judged on its own and a wrong result in Part B does not automatically sink Parts C and D. If your later work follows correctly from your own earlier answer, you can often still earn the reasoning points.

The content comes mostly from the heaviest units. Force and Translational Dynamics and Work, Energy and Power are each roughly a fifth of the exam (about 18-23% each), and the two rotation units, Torque and Rotational Dynamics plus Energy and Momentum of Rotating Systems, make up about 19% combined. Expect inclines, friction, springs, pulleys, energy transfers, collisions and rotating rods. A derivation answer must contain only the symbols the question gives you plus physical constants such as g, because a number or a symbol you invented costs you the final derivation point.

The rubric, in plain terms

12 points, earned line by line. Readers score what is on the page, nothing else.

Part A: correct set of quantities1 pt

Shows every force, or every energy form, that the situation actually has, each with a distinct label, and nothing extra appears. A "force of motion" arrow, a separate centripetal-force arrow, or a kinetic energy bar for an object at rest all lose this point, and missing a force such as friction or the normal force also loses it.

Part A: correct directions and placement1 pt

On a free-body diagram, every arrow starts on the dot and points the way the force really acts. Friction points opposite the sliding motion, and an angled push is drawn at the stated angle, while on bar charts, each bar sits in the right column and a zero amount is shown as zero.

Part A: relative sizes match the physics1 pt

Arrow lengths or bar heights agree with the physics. If something pushes an object down into the floor, the normal force must be drawn longer than the weight. On energy bar charts, the total height stays the same from chart to chart when nothing outside the system does work.

Part B: starts from a fundamental principle1 pt

Begins by writing a core law in a form tied to the diagram. Good examples are the sum of forces along one axis equal to ma, or initial energy equal to final energy plus any energy transferred. Jumping straight to a memorized special-case formula does not earn it.

Part B: correct individual terms1 pt

Substitutes the right expression for each force or energy term. Components use the correct trig function for the angle as defined, and spring energy is one half k x squared. Each term in the equation should match an arrow or a bar from Part A.

Part B: linked quantities handled correctly1 pt

Correctly connects quantities that depend on each other instead of assuming them. The main example is finding the normal force from the perpendicular direction rather than setting it equal to mg. Another is computing friction's energy loss from that normal force and the actual distance the object slides on the rough surface.

Part B: correct final expression1 pt

Reaches an algebraically correct expression for the requested quantity, written only in the symbols the question provides plus physical constants. Numbers, invented symbols, or an equation that was never solved for the requested quantity do not earn this point.

Part C: correct behavior at small values1 pt

Shows what really happens at the low end of the horizontal axis. If nothing moves until a threshold is crossed, the graph sits on zero until that threshold. It does not dip to negative values that cannot happen physically, and it does not start at the origin when the physics says it cannot.

Part C: correct shape1 pt

Draws the right type of curve where the quantity changes. A relationship of the form y = (constant)x + b is a straight line. A quadratic term gives a curve, not a line, and a positive x squared coefficient makes that curve concave up, bending upward. Where the quantity is changing, a positive x^2 term with no negative linear term means the graph keeps getting steeper as x grows, as h = kx^2/(2mg) - mu d does beyond the threshold compression. A negative x squared coefficient makes the curve bend downward. The trend must also be in the right direction, increasing or decreasing.

Part C: key value labeled1 pt

Marks a key feature, such as a threshold, an intercept or a slope, with an expression or value that agrees with the Part B result. An unlabeled bend in the graph does not earn this point.

Part D: correct claim1 pt

States the correct answer to the question asked in Part D, such as whether a student's claim is right or wrong, or which way a quantity changes.

Part D: reasoning connects representations1 pt

Supports the claim by tying the Part B expression to another representation (the diagram, the bar charts or the graph) or to the physical cause behind it. Pointing at a term in the equation and saying what that term means physically counts. Reasoning that follows correctly from your own incorrect Part B result can still earn this point.

Practice prompts

Prompt 1

Pushing a box at a downward angle

A student pushes a box of mass m, which is initially at rest, across a level floor. The student's push has constant magnitude F_0 and is directed at an angle theta below the horizontal, so it presses the box both forward and down into the floor. The coefficient of friction between the box and the floor is mu. Assume the coefficients of static and kinetic friction are equal, and that air resistance is negligible.

  1. (A)The box is represented by a dot. Draw a free-body diagram showing every force exerted on the box while it slides. Represent each force with an arrow starting on the dot, label each force, and draw the arrows so their relative lengths reflect the relative magnitudes of the forces. [3 pts]
  2. (B)Derive an expression for the magnitude of the acceleration a of the box while it slides. Express your answer in terms of F_0, theta, m, mu and physical constants, as appropriate. Begin from a fundamental principle that is consistent with your diagram in Part A. [4 pts]
  3. (C)The angle theta is held fixed at a value for which cos(theta) is greater than mu sin(theta). On a set of axes with a on the vertical axis and F_0 on the horizontal axis, sketch a graph of the acceleration of the box as a function of F_0, starting from F_0 = 0. Label any value of F_0 where the behavior of the graph changes. [3 pts]
  4. (D)A second student claims that if the push is angled steeply enough, the box will not slide no matter how large F_0 is. Use your expression from Part B to state whether this claim is correct, and explain your reasoning by connecting the expression to the physical situation. [2 pts]
Prompt 2

Spring launch across a rough strip

A block of mass m is held against a spring of spring constant k, compressing it a distance x from its natural length. The block is released from rest at Position 1. It leaves the spring and slides along a level track, and the rest of the track is frictionless. Position 2 is just before the block reaches a rough strip of length d, which has coefficient of kinetic friction mu. After crossing the strip, the block slides up a frictionless ramp and momentarily stops at its maximum height h, Position 3. The system is the block, the spring, the track and Earth. At Position 1, the energy bar chart shows 6 units of spring potential energy and zero in every other column. The columns are K (kinetic), U_s (spring), U_g (gravitational) and E_th (thermal energy increase).

  1. (A)On the rough strip, friction transforms one-third of the system's initial energy into thermal energy. Draw energy bar charts for Position 2 and Position 3 using the same four columns and the same scale as the Position 1 chart. Take U_g = 0 at the level of the track. [3 pts]
  2. (B)Derive an expression for the maximum height h reached by the block. Express your answer in terms of k, x, m, mu, d and physical constants, as appropriate. Begin from a fundamental principle that is consistent with your bar charts. [4 pts]
  3. (C)All quantities except x are held constant, and the block starts from rest each time. Sketch a graph of h as a function of the compression x, starting from x = 0. Label any value of x where the behavior of the graph changes. [3 pts]
  4. (D)A student claims that doubling the compression x will double the maximum height h, as long as the block reaches the ramp both times. Use your expression from Part B to state whether this claim is correct, and explain your reasoning by connecting the expression to the physical situation. [2 pts]

Scored examples

Two responses per prompt — one near the top of the rubric, one in the middle — with every point accounted for. The mid response earns its score through the mistakes students actually make.

Pushing a box at a downward angle · high-scoring response12/12

(A) [Diagram: a dot. Arrow straight down labeled F_g = mg. Arrow straight up labeled F_N, drawn clearly longer than F_g. Arrow pointing left labeled f_k. Arrow pointing right and downward at angle theta below the horizontal, labeled F_0.]

(B) The box doesn't speed up or slow down vertically, so a_y = 0. Vertical: sum of F_y = 0, so F_N - mg - F_0 sin(theta) = 0, which gives F_N = mg + F_0 sin(theta). Horizontal: sum of F_x = ma, so F_0 cos(theta) - f_k = ma. f_k = mu F_N = mu(mg + F_0 sin(theta)). So a = [F_0 cos(theta) - mu(mg + F_0 sin(theta))] / m. Rearranged: a = F_0(cos(theta) - mu sin(theta))/m - mu g.

(C) [Graph: a on the vertical axis, F_0 on the horizontal axis. A flat line along a = 0 from the origin out to a point labeled F_0 = mu mg / (cos(theta) - mu sin(theta)). From that point a straight line rises, labeled slope = (cos(theta) - mu sin(theta))/m.] Below the marked value, static friction matches the forward part of the push, so the box stays put and a is zero, not negative.

(D) The student is correct. In my equation the number multiplying F_0 is (cos(theta) - mu sin(theta)). If the angle is steep enough that tan(theta) is at least 1/mu, that number is zero or negative. Then a bigger F_0 can never make a positive. Physically, my diagram shows why. The downward part of the push makes F_N bigger, so friction grows by mu F_0 sin(theta) while the forward push only grows by F_0 cos(theta).

How it scored

1/1A1 — All four forces are present and labeled, and there is no invented "force of motion" arrow.
1/1A2 — Friction opposes the sliding, and the push is drawn pointing forward and downward at the stated angle theta.
1/1A3 — The normal force is drawn longer than the weight, which correctly reflects the extra downward push into the floor.
1/1B1 — Starts from Newton's second law, written separately for each axis of the diagram.
1/1B2 — Uses cos(theta) for the horizontal part and sin(theta) for the vertical part, which matches an angle measured from the horizontal.
1/1B3 — Finds the normal force from the vertical equation instead of assuming it equals mg, which is exactly what this point rewards.
1/1B4 — The final expression is algebraically correct and uses only the symbols the question provides.
1/1C1 — The graph stays at zero below the threshold and never goes negative, because static friction holds the box still there.
1/1C2 — Above the threshold the graph is a rising straight line, which matches the linear dependence on F_0 in Part B.
1/1C3 — The threshold and the slope are both labeled, and both expressions agree with the Part B result.
1/1D1 — Correctly agrees with the second student that a steep enough push never moves the box.
1/1D2 — Points to the F_0 coefficient in the equation and explains it with the larger normal force shown in the diagram.
Pushing a box at a downward angle · mid-scoring response6/12

(A) [Diagram: a dot. Arrow down labeled mg. Arrow up labeled N, drawn the same length as mg. Arrow left labeled friction. Arrow pointing right and down at an angle, labeled F_0.]

(B) sum of F = ma F_0 cos(theta) - f = ma f = mu N = mu mg a = (F_0 cos(theta) - mu mg)/m

(C) [Graph: a on the vertical axis, F_0 on the horizontal axis. A straight line starting at the origin and rising to the right. No values labeled.]

(D) The student is wrong. In my equation the friction part, mu mg, doesn't depend on F_0 at all, so if you push hard enough the F_0 cos(theta) part will always get bigger than friction. Physically, friction is set by the box's weight, but the forward part of the push keeps growing as you push harder, so eventually the box has to move.

How it scored

1/1A1 — All four forces are present and labeled, and nothing extra is drawn.
1/1A2 — Every arrow starts on the dot and points in the direction the force actually acts.
0/1A3 — The normal force is drawn equal to the weight, but the push presses the box into the floor, so the normal force must be larger than mg.
1/1B1 — Starts from Newton's second law along the direction of motion, which is an acceptable fundamental principle.
1/1B2 — The forward component F_0 cos(theta) is correct for an angle measured from the horizontal.
0/1B3 — Assumes N = mg without balancing the vertical forces, so the effect of the downward push on the normal force is lost.
0/1B4 — The final expression is missing the mu F_0 sin(theta) term, so it is incorrect.
0/1C1 — The line starts at the origin, which claims that any push, however small, makes the box slide.
1/1C2 — A rising straight line is the right shape for the region where the box is actually sliding.
0/1C3 — No threshold value or slope is labeled anywhere on the graph.
0/1D1 — The response's answer is wrong, because the second student's claim is correct: a steep enough push, with tan(theta) at least 1/mu, never moves the box.
1/1D2 — The reasoning follows correctly from the student's own Part B expression and names a physical cause, so it earns consistency credit.
Spring launch across a rough strip · high-scoring response11/12

(A) Position 2: K = 6 units, U_s = 0, U_g = 0, E_th = 0. Position 3: K = 0, U_s = 0, U_g = 4 units, E_th = 2 units. The total is 6 units on every chart because friction is inside the system, so it only changes energy from one form into another.

(B) Conservation of energy for the whole system from Position 1 to Position 3: U_s1 = U_g3 + delta E_th (1/2)kx^2 = mgh + f d On the level strip, N = mg, so f = mu mg. (1/2)kx^2 = mgh + mu mg d h = kx^2/(2mg) - mu d

(C) [Graph: h on the vertical axis, x on the horizontal axis. Flat along h = 0 from the origin to a point on the x-axis, then a curve that rises and gets steeper as x increases.] For small x the block stops on the rough strip and never gets onto the ramp, so h stays at 0.

(D) The student is wrong. h + mu d is proportional to x^2, so doubling x makes h + mu d four times bigger. Call the original height h_1. The new height is 4(h_1 + mu d) - mu d = 4h_1 + 3 mu d. That is more than four times h_1, not double. The spring stores four times as much energy, but the strip still takes away the same mu mg d, so all the extra energy goes into height.

How it scored

1/1A1 — Each chart shows exactly the energy forms that are present, including thermal energy at Position 3.
1/1A2 — Every bar is in the right column, and kinetic energy is correctly zero at the maximum height.
1/1A3 — The total stays at 6 units, split into 4 and 2 as the stated one-third loss requires.
1/1B1 — Starts from conservation of energy for the system the question defines.
1/1B2 — Spring potential energy and gravitational potential energy are both written correctly.
1/1B3 — The friction term uses N = mg, which is valid on a level strip, and the strip length d.
1/1B4 — The final expression is correct and uses only the given symbols.
1/1C1 — The graph stays at h = 0 for small compressions, and the response explains why.
1/1C2 — Above the threshold the curve rises and gets steeper, which matches the x squared term.
0/1C3 — The threshold compression is not labeled, although it should be marked as x = square root of (2 mu m g d / k), where the block just reaches the ramp.
1/1D1 — Correctly rejects the claim that doubling the compression doubles the height.
1/1D2 — Uses the Part B expression to show the height more than quadruples, and explains it with the fixed friction loss.
Spring launch across a rough strip · mid-scoring response6/12

(A) Position 2: K = 6. Position 3: U_g = 6, E_th = 2.

(B) Energy is conserved. (1/2)kx^2 = mgh h = kx^2/(2mg)

(C) [Graph: h on the vertical axis, x on the horizontal axis. A curve starting at the origin, bending upward and getting steeper. No values labeled.]

(D) No, the student is wrong. Since h = kx^2/(2mg), h depends on x squared, so doubling x makes h four times bigger, not two times bigger.

How it scored

1/1A1 — The right energy forms appear on the charts, including thermal energy at Position 3.
1/1A2 — The bars are in the correct columns, and readers treat the empty columns as zero.
0/1A3 — Position 3 totals 8 units while Position 1 totals 6, so energy appears from nowhere, and U_g should be 4.
1/1B1 — Starts from conservation of energy, which is the right principle for this situation.
1/1B2 — The spring energy and gravitational energy terms are both written correctly.
0/1B3 — The energy friction converts on the strip is left out, even though the bar chart shows it.
0/1B4 — Without the mu d term for the friction loss, the final expression is incorrect.
0/1C1 — The curve starts at the origin, which says even a tiny compression lifts the block, but small compressions leave it stuck on the strip.
1/1C2 — An upward-bending, steepening curve is the correct shape for the region where the block reaches the ramp.
0/1C3 — No threshold compression is labeled on the graph.
1/1D1 — The claim is correctly rejected, since the height does not simply double.
0/1D2 — The reasoning only restates the equation. It never links to the bar charts or to a physical cause, such as the spring storing four times the energy.

Where points die

Setting the normal force equal to mg in every problem. The normal force is whatever the surface must supply to stop the object sinking into it. Find it with Newton's second law perpendicular to the surface: the perpendicular forces add up to m times the perpendicular acceleration. That sum is zero only when the object has no acceleration in that direction, such as when it slides along a flat floor that is not accelerating. A push angled down into the floor makes the normal force larger than mg, while a pull angled upward makes it smaller. Against a vertical wall, the normal force is horizontal, and friction is what holds the object up. This one assumption costs a diagram point, a derivation point and the final expression all at once.

Drawing a force that keeps the object moving, or one that belongs to a different object. Draw a force only if something in contact with the object (or gravity) exerts it right now. Moving does not need a force, so on a frictionless surface a sliding object needs no push at all, and on a rough floor a box moving at constant velocity has a push that exactly balances friction. Either way there is no extra "force of motion" arrow. The reaction to the table's normal force on a book is the book's normal force on the table, which acts on the table and stays off the book's diagram. The book's weight pairs with the book's pull on Earth, not with the normal force.

Writing "forces balance" when the object is accelerating, or assuming net force equals the weight. Equilibrium means the forces sum to zero, and for a rigid object the torques about any axis sum to zero too. A net force equal to the weight would mean the object accelerates, and when there is acceleration, set the net force equal to ma along that axis. An elevator scale reading above mg means upward acceleration, not constant motion.

Picking the wrong trig function or dropping a square root during the algebra. Check every component against your diagram, because if the angle is measured from the horizontal, the horizontal part uses cosine. When you divide two component equations, sin over cos becomes tan, not sin. If your work reaches v squared = r g tan(theta), finish with the square root. A quick units check catches most of these errors.

Graphing a straight line through the origin by habit. Read the shape off your Part B equation, where a subtracted constant, like minus mu g, shifts the intercept below zero. If the quantity cannot physically be negative, such as the acceleration of a box that static friction holds still, or a height reached, the graph sits flat at zero up to a threshold. A positive x squared term means the graph curves upward as x grows, and a negative one means it curves downward. Then label the threshold with the same expression your equation gives.

Answering Part D with a bare yes or no, or by restating the equation. Name the term in your expression that decides the answer, then say what that term means physically. For example, the mu d term stays the same when x doubles, so the extra spring energy all goes into height. The reasoning point rewards that link, and it can still be earned when your Part B answer was wrong, as long as you use it consistently.

Score your own response

0 / 12

Be the harshest reader in the room: award a point only when your response does what the line says, on the page — not what you meant to write.