On this page · 5 sections
Showing work matters on half of the AP Calculus AB exam: the free-response section. It has six questions worth 9 points each, and you get 90 minutes for all six. Part A is two questions in 30 minutes with a graphing calculator, and Part B is four questions in 60 minutes with no calculator. The 45 multiple-choice questions only score the letter you pick, so nobody reads your scratch work there.
On the free-response questions, trained readers score your page against a point-by-point scoring guideline. Each part of a question is split into small points, and each point is earned by one specific thing written on the page. A typical part has a setup point, an answer point, and sometimes a justification point. The setup point goes to the integral with its limits, the derivative you are evaluating, or the equation you are solving. The answer point goes to the correct value, and the justification point goes to a stated reason, such as a sign change in f' or a theorem whose conditions you checked.
This is why a correct number on its own often earns little or nothing. A reader cannot award a setup point for setup you did not write down. The reverse is also true, and it works in your favor: if you write the right integral and then slip on the arithmetic, you usually keep the setup point. Readers also carry your mistakes forward, so when part (b) uses your wrong answer from part (a) correctly, part (b) can still earn full credit. Written work is not a formality, because it is the thing being scored.
The steps
- 1
Find the verb before you start
Read the whole part and mark the command word, because it tells you what earns the points. "Find" or "evaluate" wants setup plus an answer. "Justify" or "explain" wants a stated reason tied to the function, and an answer with no reason gets nothing for that point. "Show that" means the answer is already given, so every point lives in your steps. "Interpret" wants a sentence in context with units. Spend ten seconds on this for each part, since a student who finds the right value but misses the word "justify" loses the point anyway.
- 2
Write the setup in math notation first
Before you touch the calculator, write the expression you are about to evaluate. For an amount, that means a definite integral with its limits, its integrand, and dt or dx, such as 40 + ∫ from 0 to 6 of r(t) dt. For a rate at a moment, write it as g'(4) = ... before the number. For an equation you solve, write the equation itself. Use standard notation rather than calculator syntax, because a line like fnInt(r(t),t,0,6) does not count as setup. On calculator questions you may use four built-in features without showing their inner steps: graphing a function, solving an equation, finding a derivative value at a point, and evaluating a definite integral. Everything else needs written steps.
- 3
Report numbers the way readers expect
Decimal answers must be correct to three places after the decimal point. You may round or truncate, but the first three decimals have to be right, and the usual trap is rounding too early. If you round an intersection point to 1.37 and then use it as a limit of integration, your final answer can drift off in the third decimal and lose the point. Store full values in the calculator and only round what you write as the final answer. Unless the question says otherwise, you do not need to simplify, so an answer like 3 ln 2 + 5 is complete. Add units whenever the question gives units, because some answer points require them.
- 4
Justify with a named reason about a named function
A justification has to say why, and it has to say what it is about. Name the function every time: write "f' changes from positive to negative at x = 3", not "it changes sign". A reader will not guess whether "it" means f, f', or the graph. Then use one of the standard arguments the readers expect. For a relative extremum, give the sign change of f' or the sign of f'' at a critical point. For an absolute extremum on a closed interval, compare the function's values at every critical point and both endpoints. For a theorem, list its conditions and confirm each one before you state its conclusion.
- 5
Check theorem conditions out loud
Theorems earn points only when you show their hypotheses hold. For the Mean Value Theorem, state that the function is continuous on the closed interval and differentiable on the open interval. For the Intermediate Value Theorem, state that the function is continuous on the closed interval [a, b], and show that the target value lies between f(a) and f(b). For the Extreme Value Theorem, state that the function is continuous on the closed interval. For L'Hospital's Rule, show that the numerator and denominator both approach 0, or both approach infinity, before you differentiate. Writing "by MVT" alone is a name-drop and usually earns nothing. When the function is given as a table, say where continuity comes from, such as "f is differentiable, so f is continuous".
- 6
Keep every line honest and in the right place
Readers can take a point for a false statement even when your final answer is right. The most common one is a chain of equals signs that are not really equal, such as 3x^2 = 12 = x = 2, which you should replace with separate lines. Put each part's work in the space for that part, because readers do not hunt through other parts for credit. Do not cross out work just because you feel unsure of it, since crossed-out work is never scored. Cross out only a version you truly reject, and leave one clear answer for each part.
- 7
Bank setup points when you are short on time
Each part has its own points, so a weak part (a) does not automatically lose part (b). If a part stalls, write the setup and move on, because an integral with correct limits, or a correct derivative expression, often earns a point even with no final value. When a later part needs an earlier answer you never found, give that value a name or an assumed value, label it, and use it correctly. That can still earn the method points in the later part, though not always the answer point, so treat the method point as your realistic target. Five minutes of setups across three hard parts is usually worth more than five minutes stuck on one.
Worked through
Below is a practice question invented for this guide, written in the no-calculator style, and each response is followed by a note on what earns credit.
Let g(x) = x^3 - 6x^2 + 9x + 2. (a) Find the x-coordinate of each critical point of g, and classify each as a relative maximum, relative minimum, or neither. Justify your answers. (b) Find the absolute maximum value of g on the closed interval [0, 4]. Justify your answer. (c) Must there be a value c, with 0 < c < 4, such that g'(c) = 1? Justify your answer.
Part (a) response. g'(x) = 3x^2 - 12x + 9 = 3(x - 1)(x - 3), so g'(x) = 0 at x = 1 and x = 3. g'(x) > 0 for x < 1, g'(x) < 0 for 1 < x < 3, and g'(x) > 0 for x > 3. g has a relative maximum at x = 1 because g' changes from positive to negative there. g has a relative minimum at x = 3 because g' changes from negative to positive there.
Why it scores: the derivative is written out, so the critical points are visible rather than announced. Each classification names g' and the direction of its sign change, which is exactly what the justification point asks for. A response that said "x = 1 is a max because the derivative is zero" would lose the justification, because g' = 0 alone does not classify anything. Testing one value in each interval, such as g'(2) = -3, is a fine way to find the signs. A sign chart helps you organize the work, but the written sentence about g' is what readers credit, so never let a chart stand alone as your justification.
Part (b) response. The candidates are the endpoints x = 0 and x = 4 and the critical points x = 1 and x = 3. g(0) = 2, g(1) = 1 - 6 + 9 + 2 = 6, g(3) = 27 - 54 + 27 + 2 = 2, g(4) = 64 - 96 + 36 + 2 = 6. The absolute maximum value of g on [0, 4] is 6.
Why it scores: this is the candidates test, which the readers accept for a closed interval. Every candidate is listed and evaluated, and then the largest value is named. Notice that the question asks for the value, so the answer is 6, not x = 1. The maximum happens at both x = 1 and x = 4, and you could mention both. A common mistake is to stop at the relative maximum from part (a), which misses the endpoint x = 4 where g reaches the same height.
Part (c) response. g is a polynomial, so g is continuous on [0, 4] and differentiable on (0, 4). The average rate of change is (g(4) - g(0)) / (4 - 0) = (6 - 2) / 4 = 1. So by the Mean Value Theorem, there must be a value c in (0, 4) with g'(c) = 1.
Why it scores: the two conditions are stated before the theorem is used, and the average rate of change is computed with real numbers. Both pieces are needed, and "Yes, by MVT" with no conditions and no difference quotient earns nothing here. You do not need to find c, but if you want to check, 3c^2 - 12c + 8 = 0 gives c = 2 ± 2√3/3, and both values lie between 0 and 4.
What the page shows: every point above came from a line a reader can point to. The arithmetic was easy, but the credit came from the derivative, the written sign statements, the list of candidates, and the stated conditions.
Common mistakes
Writing a bare calculator answer. A correct decimal with no integral or equation shown usually loses the setup point and can lose the answer point too, because the reader cannot see where the number came from. Writing calculator syntax such as fnInt(...) instead of an integral counts the same as writing nothing.
Rounding in the middle of a calculation. A limit of integration rounded to two decimals can push the final answer off in the third decimal place. Store the full value and round only the final answer to three decimals.
Saying "it" or "the slope" in a justification. Readers will not decide for you whether you meant f, f', or the graph. A sign change in f' justifies a relative extremum of f, and saying f' = 0 alone justifies nothing.
Citing a theorem without checking its conditions. "By the MVT" or "by IVT" with no statement of continuity and differentiability is a name-drop. The same goes for L'Hospital's Rule used without first showing the 0/0 or infinity/infinity form.
Using only relative extrema to find an absolute maximum or minimum. On a closed interval you must also evaluate the function at both endpoints, because the absolute extremum is often at an endpoint.
Linking unequal things with equals signs, or leaving work in the wrong part's space. A chain like 3x^2 = 12 = x = 2 is a false statement and can cost a point, and work written under another part may never be scored.
Checklist
- Can you name the command word in each part and say what it requires: find, justify, explain, show that, or interpret?
- For every calculator answer, did you write the integral, derivative, or equation in standard notation before the number?
- Are your decimal answers correct to three places, with no intermediate value rounded early?
- Does every justification name the function it is about, such as f or f', and never just say "it"?
- When you used a theorem, did you state each of its conditions first and show they hold?
- For an absolute extremum on a closed interval, did you evaluate the function at every critical point and both endpoints?
- Did you include units and a sentence in context wherever the question gave units or asked you to interpret?
- If you could not finish a part, did you still write its setup and use any earlier value, even an assumed one, correctly in later parts?