8 topics. Each one opens with its key idea, then the detail you need to use it.
1. DNA structure and replication
Key idea: DNA polymerase only adds to a 3' end, which is why one strand is copied in Okazaki fragments.
A nucleotide has three parts: a phosphate group, a five-carbon sugar and a nitrogenous base. DNA uses deoxyribose and the bases A, T, G and C. RNA uses ribose and swaps T for U. Phosphodiester bonds link the sugar of one nucleotide to the phosphate of the next, forming a sugar-phosphate backbone. The two strands run antiparallel, so one runs 5' to 3' and the other runs 3' to 5'. A pairs with T through two hydrogen bonds, and G pairs with C through three.
The bases come in two shapes. Purines (A and G) have two rings, and pyrimidines (C, T and U) have one ring. A purine always pairs with a pyrimidine, so every rung of the ladder is three rings wide and the helix keeps an even width.
DNA is packaged differently in the two cell types. Prokaryotes usually have one circular chromosome and often carry small extra circles of DNA called plasmids. Eukaryotes have several linear chromosomes inside a nucleus, with the DNA wrapped around histone proteins.
Replication is semiconservative, so each new helix keeps one old strand and gains one new strand. Helicase unwinds the helix by breaking the hydrogen bonds between bases. Topoisomerase relieves the twisting ahead of the fork. Primase lays down a short RNA primer, because DNA polymerase cannot start a strand from nothing. DNA polymerase then adds nucleotides only to the 3' end, so new DNA grows 5' to 3'.
That one-direction rule creates two strand types. The leading strand is built continuously toward the fork. The lagging strand is built away from the fork in short Okazaki fragments, each needing its own primer. Later, the primers are replaced with DNA and ligase seals the gaps. Questions often ask why the lagging strand is discontinuous. The answer is always the 5' to 3' limit of DNA polymerase combined with antiparallel strands.
2. Transcription: DNA to RNA
Key idea: RNA polymerase binds the promoter, reads the template strand 3' to 5', and builds RNA 5' to 3' with no primer.
Transcription copies one gene into RNA. In eukaryotes it happens in the nucleus, and in prokaryotes it happens in the cytoplasm. RNA polymerase binds to a promoter, a DNA sequence just upstream of the gene. In eukaryotes, general transcription factors must bind first, often at a TATA box, before the polymerase can attach.
RNA polymerase unwinds a short stretch of DNA and reads the template strand 3' to 5'. It builds RNA 5' to 3', pairing U with A, A with T, C with G and G with C. Unlike DNA polymerase, it needs no primer. The other DNA strand, the coding strand, has the same sequence as the mRNA except with T in place of U. That is a common trick: if a question gives you the coding strand, the mRNA matches it, but if it gives you the template strand, you must pair the bases.
Three types of RNA come from transcription. mRNA carries the code for a protein. tRNA carries amino acids to the ribosome. rRNA forms the core of the ribosome and catalyzes peptide bonds. Only mRNA is translated, but all three are gene products, which is why gene expression is not always about protein.
3. RNA processing and alternative splicing
Key idea: Cap and tail protect mRNA and aid translation; splicing removes introns, and alternative splicing makes many proteins from one gene.
In eukaryotes, the first transcript is pre-mRNA, and it must be processed before it leaves the nucleus. Three changes happen. A 5' cap, a modified guanine nucleotide, is added to the front end. It protects mRNA from enzymes that chew RNA from the end, and it helps the ribosome find and bind the mRNA. A poly-A tail of many adenine nucleotides is added to the 3' end. It also slows breakdown and helps the mRNA get exported.
The third change is splicing. Genes contain introns, which are removed, and exons, which are kept and joined. A complex of proteins and small RNAs called the spliceosome does the cutting. The cap does not remove introns, and it does not signal the end of translation, which are two wrong answers the exam likes to offer.
Alternative splicing lets a cell join exons in different combinations. One gene can then produce several different mRNAs and several different proteins. This is one reason humans make far more kinds of proteins than our roughly 20,000 genes would suggest. It is also a form of post-transcriptional regulation, because the cell controls the product after the gene has already been transcribed. Prokaryotes generally do not cap or splice their mRNA. They also have no nucleus, so transcription and translation happen in the same space, and ribosomes can start translating an mRNA while RNA polymerase is still making it.
4. Translation and the genetic code
Key idea: Ribosomes read codons from AUG to a stop codon and build only the primary structure; the degenerate code makes some mutations silent.
Translation turns an mRNA's codons into a chain of amino acids. It happens at ribosomes in the cytoplasm or on rough ER. Each tRNA carries one amino acid and has an anticodon that base-pairs with a matching codon. The ribosome has three tRNA sites. The A site receives the incoming tRNA, the P site holds the growing chain, and the E site releases the empty tRNA.
Translation starts at the start codon AUG, which codes for methionine. The ribosome moves along the mRNA 5' to 3', one codon at a time. rRNA in the large subunit forms a peptide bond between each new amino acid and the chain. Translation ends at a stop codon (UAA, UAG or UGA), where a release factor frees the polypeptide.
The ribosome makes only the primary structure, a straight chain held by covalent peptide bonds. Helices, folds and multi-subunit assemblies form afterward through interactions among the chain's atoms and R groups, sometimes with help from chaperones.
The code has 64 codons. Sixty-one code for 20 amino acids, and three are stops. Because there are more codons than amino acids, the code is degenerate: most amino acids have several codons, often differing only at the third base. Degeneracy is why many point mutations are silent. The code is also nearly universal. That is why a bacterium given an intron-free copy of a human gene (cDNA, made from mature mRNA) can translate it into the correct human protein. A normal human gene would fail, because bacteria cannot remove introns.
5. Prokaryotic gene regulation: operons
Key idea: Lac is inducible and needs lactose present plus glucose absent for maximum transcription; trp is repressible and shuts off when tryptophan is high.
Bacteria often group related genes into an operon, which is one promoter, one operator and several genes transcribed together. The operator is a DNA switch where a repressor protein can bind and block RNA polymerase.
The lac operon in E. coli codes for enzymes that break down lactose. It is inducible, meaning it is normally off. With no lactose, the repressor sits on the operator. When lactose is present, a form of it called allolactose binds the repressor and changes its shape, so it falls off the operator. Transcription can now happen.
There is a second control. E. coli prefers glucose. When glucose is low, the cell's cAMP level rises. cAMP binds a protein called CAP, and the CAP-cAMP complex attaches near the promoter and helps RNA polymerase bind strongly. So the lac genes reach their highest level only when lactose is high and glucose is low. High lactose with high glucose gives only weak transcription, and no lactose means the repressor keeps the operon off.
The trp operon works the opposite way. It is repressible, meaning it is normally on. It makes the enzymes that build tryptophan. When tryptophan is plentiful, it binds the repressor and activates it, and the repressor shuts the operon off. The cell stops making what it already has.
6. Eukaryotic regulation: transcription factors and epigenetics
Key idea: Transcription factors at promoters and enhancers set the rate; methylation and histone deacetylation silence genes heritably without changing the sequence.
Eukaryotes control most genes at the start of transcription. Transcription factors are proteins that bind specific DNA sequences and raise or lower the rate of transcription. Some bind the promoter. Others bind enhancers, which can sit thousands of bases away. The DNA loops so that activators on the enhancer contact the machinery at the promoter. Delete an enhancer, for example with CRISPR, and the gene is transcribed at a lower rate. Silencers do the opposite, so removing one raises expression. Each cell type makes its own set of transcription factors, which is why each cell type expresses its own set of genes.
Chromatin packing adds a second layer. DNA wraps around histone proteins. Adding acetyl groups to histones loosens the chromatin, so genes become easier to transcribe. Removing them tightens it. Adding methyl groups to DNA, usually at cytosines in CpG regions near promoters, usually silences a gene. Methylation blocks transcription factors and recruits proteins that compact the chromatin into heterochromatin.
These changes are epigenetic, meaning they alter expression without changing the base sequence. Enzymes copy methylation patterns onto new DNA after replication, so the silencing is inherited by daughter cells. In some cancers, a tumor suppressor's promoter becomes heavily methylated. The gene is still intact but silent, so a brake on cell division is lost.
Control continues after transcription. Small RNAs such as microRNAs pair with target mRNAs and block their translation or trigger their breakdown. This is post-transcriptional gene silencing.
7. Development: Hox genes and differentiation
Key idea: Hox genes code for transcription factors that set body regions; differentiation is a narrowing of which genes a cell expresses.
A fertilized egg becomes hundreds of cell types through differential gene expression. Each cell turns on a different set of genes, in response to signals from neighbors and to molecules already in the egg. A frog egg, for example, is packed with stores laid down while it formed. Its own nucleus made the stored mRNA and rRNA. Most of its stored protein, especially yolk, was made in the mother's liver, carried in her blood and taken up by the growing egg. These stores carry the embryo through its first rapid divisions before the embryo's own genes switch on.
Hox genes control body layout. They code for transcription factors that share a DNA-binding region called the homeobox. Each Hox gene is expressed in one zone along the head-to-tail axis and tells cells in that zone which structures to build. The genes even sit on the chromosome in roughly the same order as the body regions they control. Mutations in Hox genes put body parts in the wrong place. In the fruit fly Antennapedia mutant, legs grow where antennae should be. Hox genes are found in nearly all animals, from flies to mice to humans, which is strong evidence of common ancestry.
Stem cells show how gene expression narrows over time. Totipotent cells, such as the zygote and its first few daughter cells, can form every cell type, including the placenta. Pluripotent embryonic stem cells can form any body cell but not the placenta. Multipotent cells form a few related types, and unipotent cells form only one.
8. Mutations and biotechnology
Key idea: Mutations feed natural selection, and prokaryotes also swap genes sideways; in a gel, small fragments travel farthest, and CRISPR uses a guide RNA to aim a cut.
A mutation is a change in the DNA sequence. A point mutation swaps one base and can be silent, missense or nonsense. A nonsense mutation creates an early stop codon, so the ribosome releases a truncated protein that usually does not work. An insertion or deletion of one or two bases shifts the reading frame, which changes every codon after it.
Mutations arise from errors in DNA replication that repair enzymes miss, or from DNA damage that is repaired incorrectly. They are the raw material for natural selection. Whether a mutation helps, harms or does nothing depends on the environment. A mutation that makes a bacterium resistant to an antibiotic only helps when that antibiotic is present.
Prokaryotes also gain variation through horizontal gene transfer, which moves genes between cells instead of from parent to offspring. In transformation, a cell takes up DNA from its surroundings. In transduction, a virus carries DNA from one cell to another. In conjugation, one cell passes DNA, often a plasmid, to another through direct contact. In transposition, transposons (jumping genes) move to new spots in the genome and can disrupt the genes they land in.
Biotechnology tools let you read and change DNA. PCR copies a target sequence millions of times. Each cycle heats the DNA to separate the strands, cools it so primers bind, and lets a heat-stable polymerase extend them. Restriction enzymes cut DNA at specific short sequences. Bacterial transformation in the lab puts a plasmid carrying a chosen gene into bacteria, which copy the plasmid and make the gene's product, such as human insulin. DNA sequencing reads the exact order of bases in a fragment, so you can find a mutation directly.
Gel electrophoresis sorts DNA fragments by size. DNA has a negative charge from its phosphate backbone, so it moves toward the positive electrode. Every fragment has about the same charge per unit of mass, so charge does not sort them. The gel's pores do. Small fragments slip through easily and travel farthest from the wells, while large ones lag behind. A ladder of known sizes lets you estimate each band's length.
CRISPR-Cas9 edits genes. A guide RNA base-pairs with a chosen DNA sequence and leads the Cas9 enzyme there. Cas9 cuts both strands. When the cell repairs the cut, the repair can disrupt the gene, or researchers can supply a template to insert a new sequence. Bacteria first evolved CRISPR to cut the DNA of invading viruses.