Skip to content
AP Environmental Science · Earth Systems and Resources

Permeability

Permeability appears in 4 reviewed AP Environmental Science questions and sits in Earth Systems and Resources. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How Permeability is tested

Example 1Medium
A soil scientist analyzes two soil samples. Sample A has 40% sand, 40% silt, and 20% clay. Sample B has 70% sand, 20% silt, and 10% clay. Which comparison of their properties is most accurate?
  1. ASample A drains faster because its higher silt content creates larger pore spaces
  2. BSample A has higher water-holding capacity and lower permeability than Sample BCorrect
  3. CBoth samples have identical drainage properties because they contain the same mineral types
  4. DSample B has higher water-holding capacity and better nutrient retention than Sample A

Why B is right

Sample A has more clay and silt (60% combined vs. 30% in Sample B), giving it smaller particle sizes and pore spaces. Smaller pores retain water through capillary action, increasing water-holding capacity. The smaller pores also slow water movement, reducing permeability (drainage rate). Sample B's higher sand content creates larger pores that drain quickly.
Why the other 3 choices miss
A
Incorrect. Silt particles are smaller than sand particles and create smaller pore spaces, not larger ones. Higher silt content slows drainage rather than speeding it up.
C
Incorrect. Drainage properties depend on particle size distribution, not just mineral type. The significant difference in sand, silt, and clay proportions between the samples produces very different drainage characteristics.
D
Incorrect. Sample B's higher sand content (70%) creates large pore spaces that drain quickly, resulting in lower water-holding capacity and poorer nutrient retention compared to Sample A's finer texture.
Example 2Medium
Soil with high clay content compared to sandy soil will typically have
  1. Aboth lower water-holding capacity and lower permeability
  2. Bhigher water-holding capacity but lower permeabilityCorrect
  3. Clower water-holding capacity but higher permeability
  4. Dboth higher water-holding capacity and higher permeability

Why B is right

Clay particles are very small with large surface area, allowing them to hold water tightly through adhesion. However, the small pore spaces between clay particles restrict water flow, resulting in low permeability.
Why the other 3 choices miss
A
Incorrect because clay soil has high water-holding capacity due to its fine particle size and large surface area.
C
Incorrect because this describes sandy soil characteristics, not clay soil; sandy soil has large particles with low water-holding capacity and high permeability.
D
Incorrect because while clay has high water-holding capacity, its small pore spaces give it low permeability, not high.

Studied alongside

Other concepts from Earth Systems and Resources.