Skip to content
AP Environmental Science · Atmospheric, Aquatic, and Terrestrial Pollution

NOx

NOx appears in 6 reviewed AP Environmental Science questions and sits in Atmospheric, Aquatic, and Terrestrial Pollution. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How NOx is tested

Example 1Harder
The chemistry of acid rain formation from nitrogen oxide emissions follows which reaction sequence?
  1. AN2 + O2 → NO (at high combustion temperatures) → NO2 → NOx + H2O → HNO3Correct
  2. BNO3- (nitrate ion) + H2O → HNO3 + OH- (base formation in rain)
  3. CNH3 + O3 → HNO3 + H2 (nitric acid forming directly from ammonia)
  4. DNO2 + H2O → HNO2 (nitrous acid) → further oxidation in sunlight → HNO3 (nitric acid)

Why A is right

The nitrogen oxide pathway to acid rain is: (1) Combustion at high temperatures (vehicles, power plants) reacts atmospheric N2 with O2: N2 + O2 → 2NO; (2) NO is oxidized in air: 2NO + O2 → 2NO2; (3) NO2 reacts with water vapor: 3NO2 + H2O → 2HNO3 + NO, or in simplified form: 4NO2 + 2H2O + O2 → 4HNO3. The resulting nitric acid (HNO3) dissolves in atmospheric moisture to form acid rain with pH as low as 4-5 (normal rain is ~5.6).
Why the other 3 choices miss
B
Nitrate ions (NO3-) in water create a slightly alkaline solution (conjugate base of strong acid HNO3), not acidic; acid rain forms from the dissolution of gaseous NOx compounds in atmospheric water droplets, not from ionic chemistry in ground-level water.
C
Ammonia (NH3) is a base that can actually neutralize acid rain; it does not react with ozone to form nitric acid; ammonia is released by livestock and fertilizers and can locally neutralize acid deposition rather than contributing to it.
D
While NO2 does react with water to form some nitrous acid (HNO2), the complete acid rain pathway involves multiple oxidation steps and the primary nitrogen-based acid in acid rain is nitric acid (HNO3), formed through the full NOx oxidation pathway described in option B.
Example 2Medium
What primarily determines whether precipitation falls as acid rain with destructive effects in a particular location?
  1. AThe type and quantity of acid-forming emissions (SO2, NOx) upwind and the buffering capacity of the receiving soils and water bodies.Correct
  2. BThe total amount of rainfall — heavy rainfall dilutes acid and is less damaging than light drizzle.
  3. CThe elevation of the receiving area — acid rain falls preferentially at high elevations because SO2 rises before reacting with water.
  4. DThe average temperature of the area — cold regions experience more acid rain because cool air holds SO2 longer before converting it.

Why A is right

The impact of acid precipitation depends on two factors: (1) The source — how much SO2 and NOx is emitted upwind (from power plants, smelters, vehicles) determines how acidic the precipitation is; (2) The buffering capacity of the receiving environment — limestone-bedrock watersheds neutralize acid inputs through CaCO3 (calcium carbonate), while granite-bedrock watersheds lack this buffering and acidify readily. Areas combining high acid deposition AND low buffering capacity (e.g., northeastern U.S. on granite) experience the worst acid rain damage.
Why the other 3 choices miss
B
Heavy rainfall does dilute acidity somewhat, but the total acid load delivered (acid concentration × volume) determines ecological impact; chronic low-intensity deposition can be more damaging than occasional high-intensity events by gradually depleting soil buffers.
C
SO2 does not preferentially rise to high elevations before reacting; acid rain formation occurs at all altitudes in the troposphere; high-elevation areas may receive more acid deposition from cloud and fog droplets (occult deposition), but this is not due to SO2 rising selectively.
D
Cold air does not hold SO2 longer; atmospheric oxidation of SO2 to sulfuric acid depends on humidity, ozone, and hydroxyl radical concentrations, not primarily on temperature; warm, humid conditions can actually accelerate SO2 oxidation.
Example 3Medium
Photochemical smog forms primarily in urban areas with heavy traffic and strong sunlight. Which chemical reaction sequence best describes its formation?
  1. ACarbon dioxide from power plants reacts with atmospheric moisture to form carbonic acid fog
  2. BNitrogen oxides and volatile organic compounds react in sunlight to form ozoneCorrect
  3. CSulfur dioxide from coal burning reacts with water vapor to form sulfuric acid droplets
  4. DParticulate matter from industrial smokestacks absorbs sunlight and heats the lower atmosphere

Why B is right

Photochemical smog formation begins when nitrogen oxides (NOx) from vehicle exhaust and volatile organic compounds (VOCs) from fuels, solvents, and vegetation react in the presence of ultraviolet sunlight. The photochemical reactions produce ground-level ozone (O3), peroxyacyl nitrates (PANs), and other oxidants that constitute the brown haze seen over cities like Los Angeles.
Why the other 3 choices miss
A
Incorrect. CO2 reacting with moisture to form carbonic acid is part of ocean acidification chemistry, not smog formation. CO2 does not contribute significantly to photochemical smog.
C
Incorrect. This describes industrial (London-type) smog or acid rain formation, not photochemical smog. Sulfur dioxide-based pollution is associated with coal burning, not the NOx/VOC/sunlight chemistry of photochemical smog.
D
Incorrect. While particulate matter is a component of urban air pollution, it does not form smog through sunlight absorption. Photochemical smog is a gas-phase chemical process involving NOx, VOCs, and UV radiation.

Studied alongside

Other concepts from Atmospheric, Aquatic, and Terrestrial Pollution.