Skip to content

AP Calculus BC · technique

How to earn full credit for your work

On this page · 5 sections

Section II of the AP Calculus BC exam has six free-response questions, and each one is worth 9 points. Together they make up half of your exam score. Part A gives you two questions with a graphing calculator, and Part B gives you four questions without one. Readers grade against a point-by-point rubric. Some points go to the correct final answer, but most go to specific written work: a setup, a justification, correct notation, or units.

This means a correct answer with no supporting work often earns little or nothing. A "bald" calculator answer, such as writing 19.911 with no integral beside it, usually scores zero for that part. On the other hand, a clear setup with an arithmetic slip can still earn most of the points. Readers also score each part on its own terms. If you get part (a) wrong but use your wrong value correctly in part (b), you can usually still earn the part (b) points.

Three kinds of work carry the most weight. First, setups: the integral, derivative, sum or equation you are about to evaluate, written in standard notation. Second, justifications: the theorem or test you are using, its conditions, and a conclusion tied to them. Third, communication: answers given to three decimal places, units where asked, and no ambiguous words like "it". Learning these habits is the fastest way to raise a BC free-response score, because the points are predictable and repeat every year.

The steps

  1. 1

    Read every part before you write

    Spend about 30 seconds scanning parts (a) through (d). Later parts often reuse an earlier result, so you want to know which numbers you will need again. Circle the command word in each part. "Find" or "approximate" wants a setup and a value. "Justify" or "explain" wants a reason tied to a theorem or a sign. "Show that" wants every algebra step, because the answer is already printed on the page. Also note any units in the stem, such as liters per minute, so you can label answers later.

  2. 2

    Write the setup before you compute

    Put the full mathematical expression on paper first, then the value. For an accumulation question, write something like 50 + ∫ from 0 to 9 of W(t) dt − ∫ from 0 to 9 of L(t) dt before you compute anything. If W is given only as a table, its integral comes from your trapezoidal sum, and only the L integral goes to the calculator. For a Riemann or trapezoidal sum, write every product, such as 3·(12 + 18)/2, so the reader can see your widths and heights. The setup point is often a separate point from the answer point. If your calculator or your arithmetic fails, the setup point is still yours.

  3. 3

    Use the calculator only for the four allowed jobs

    On Part A, readers accept calculator results for four things: graphing a function, finding a zero, finding a numerical derivative at a point, and evaluating a definite integral. Everything else must be shown by hand. When you use one of the four, write the mathematical setup, not calculator syntax. Write ∫ from 0 to 9 of (2 + sin t) dt, not fnInt(2+sin(X),X,0,9). Report decimals correct to three places, rounded or truncated. Store intermediate values in the calculator rather than rounding them early, because an early round can push your final answer outside the accepted range.

  4. 4

    Justify with a named reason and checked conditions

    A justification needs three pieces: the tool, the conditions, and a conclusion that links them. For the Mean Value Theorem, state that the function is continuous on the closed interval and differentiable on the open interval, then compute the average rate of change. Finish by saying f′(c) equals that value for some c in the open interval. For the Intermediate Value Theorem, state continuity and show the target value sits between two outputs. For a relative maximum, say "f′ changes from positive to negative at x = 2". Saying "f′ = 0" alone earns nothing, because a zero derivative does not guarantee an extremum.

  5. 5

    Name the function every time

    Never write "it is increasing because it is positive". The reader cannot tell whether "it" means f, f′ or f″, and an ambiguous reason earns no credit. Write "f is increasing on (1, 4) because f′(x) > 0 there." The same rule applies to particle motion. Write "speed is increasing at t = 3 because v(3) and a(3) are both negative", not "it's speeding up". Naming the function costs two seconds and protects a whole point.

  6. 6

    Finish the BC-specific procedures in full

    Several BC topics have points that depend on finishing steps students skip. In separation of variables, include + C when you antidifferentiate, then use the initial condition to find C, then solve for y. Leaving out + C typically caps the rest of the problem. In a ratio test, write the limit as n → ∞ with absolute value bars, then test each endpoint separately for the interval of convergence. For an alternating series error bound, state that the terms alternate, decrease in size and approach zero. Before using L'Hôpital's Rule, show that the numerator and denominator both approach 0, or both approach infinity. For parametric and polar questions, write the setup before you evaluate: speed as sqrt((dx/dt)^2 + (dy/dt)^2), or polar area as (1/2)∫ r^2 dθ with its bounds shown.

  7. 7

    Label, check, and leave one answer

    Before you move on, add units if the stem gave them, such as liters or meters per second. Check that every equals sign joins two things that really are equal. A chain like 3 + 4 = 7 · 2 = 14 is a linkage error that can cost a point. If you change your mind, cross out the old work with a single line instead of erasing, because crossed-out work is not graded. Never leave two different answers standing, since the reader will not choose the correct one for you.

Worked through

Here is an original Part A style question, with the work a full-credit response would show.

The stem: Water flows into a tank at a rate W(t) liters per minute, where W is differentiable and t is in minutes. Selected values are t = 0, 3, 5, 9 with W(t) = 12, 18, 14, 20. Water leaks out at a rate L(t) = 2 + sin t liters per minute. At t = 0 the tank holds 50 liters.

(a) Use a trapezoidal sum with the three subintervals in the table to approximate the integral of W(t) from 0 to 9. Include units.

Write each trapezoid so the widths and heights are visible: 3·(12 + 18)/2 + 2·(18 + 14)/2 + 4·(14 + 20)/2 = 45 + 32 + 68 = 145 liters.

The subintervals have different widths, which is why each width is written separately. A student who assumes equal widths of 3 loses the point. The units are liters because liters per minute times minutes gives liters.

(b) Must there be a time t in (3, 5) when W′(t) = −2? Justify.

W is differentiable, so W is continuous on [3, 5] and differentiable on (3, 5). By the Mean Value Theorem, there is a time c in (3, 5) where W′(c) equals the average rate of change. That average is (14 − 18)/(5 − 3) = −4/2 = −2. So yes, there must be such a time.

Notice that the response names the theorem, states both conditions, computes the value and gives a conclusion. Dropping any of those pieces puts the point at risk.

(c) Must there be a time t in (0, 9) when W(t) = 16? Justify.

W is differentiable, so it is continuous on [0, 3]. Since W(0) = 12 < 16 < 18 = W(3), the Intermediate Value Theorem guarantees a time in (0, 3) with W(t) = 16. That interval lies inside (0, 9), so the answer is yes.

(d) Find the total amount of water that leaks out from t = 0 to t = 9.

Write the setup first: ∫ from 0 to 9 of (2 + sin t) dt = 19.911 liters.

The integral earns the setup point, and the calculator supplies the value. By hand you can check it: the antiderivative gives 18 + 1 − cos 9, and cos 9 is about −0.911, so the total is about 19.911.

(e) Approximate the amount of water in the tank at t = 9.

50 + 145 − 19.911 = 175.089 liters.

This part imports the answer from (a). If your trapezoidal sum had been wrong, the reader would still award this point as long as you combined your own values correctly. Notice also that 19.911 was kept to three decimals and was not rounded to 20 before subtracting.

Common mistakes

  • Writing only a calculator result, such as 19.911, with no integral or derivative expression beside it. Readers treat a bald answer as unsupported and usually award no setup or answer point.

  • Justifying with vague or pronoun-based reasons, such as "it is positive so it increases", or stating "f′(c) = 0" as proof of an extremum. The reader needs the named function and a sign change or a theorem with its conditions checked.

  • Rounding intermediate values early, such as rounding 19.911 to 20 before subtracting, which can push the final answer outside the three-decimal range readers accept.

  • Leaving out + C in separation of variables, or never using the initial condition to find it, which typically caps the rest of the differential equation points.

  • Skipping BC procedure steps: no absolute value or limit in the ratio test, endpoints not tested for the interval of convergence, or an alternating series error bound used without stating the series alternates and its terms decrease to zero.

  • Writing false equals-sign chains, calculator syntax like fnInt in place of math notation, or two conflicting answers left on the page without crossing one out.

Checklist

  • Every number I got from a calculator has its integral, derivative or equation written right before it.
  • Every decimal answer is correct to three places, and I stored intermediate values instead of rounding them.
  • Every justification names the theorem or test, states its conditions, and ends with a conclusion tied to them.
  • I named the function (f, f′, v, a) in every reason and never used "it".
  • My Riemann and trapezoidal sums show each width and height, including unequal widths.
  • My differential equation solutions include + C, use the initial condition, and solve for y.
  • My series work shows the limit with absolute values, tests both endpoints, and checks the conditions of any error bound I used.
  • I added units wherever the stem gave them, and no part has two answers left standing.

More AP Calculus BC technique